• 한국해양학회지
• /
• 제21권3호
• /
• pp.131-135
• /
• 1986

階段形 初期海面攪亂이 定常狀態에 도달할 때 에 생기는 에너지 換(位置에 너지로부터 運動에너지로)에 대하여 고찰하였다. 無限少 攪亂의 경우 線形化가 가능 하며 이때 換比(生成된 運動에너지의 消滅된 位置에너지에 대한)는 初期攪亂의 水平的 規模가 커짐에 따라 1/3에 近接함이 解析的으로 밝혀졌다.

• 한국초지조사료학회지
• /
• 제17권4호
• /
• pp.399-406
• /
• 1997

This research was carried out to investigate the effect of zeranol injection on dry matter(DM) and nutrient intake requirement by growth stage of early castrated bull with 3 treatments(bul1, steer, steer+zeranol) with 28 Holstein bull at National Livestock Research Institute. The main results were as follows: DM intake at growing and fatting stage was the highest in steer groups, that the highest in bull groups at finishing stage and overall mean DM intake was 5% lower at steer+zeranol groups compared to bull and steer, respectively. Net energy intake at finishing stage was the highest as 35.49 Mcal at bull groups, while overall mean net energy intake was 101 - 109% of NRC requirement without significant difference. Concentrate intake to body weight was 1.68- 1.82, 1.91 -2.08 and 1.81 -2.05% at growing, fatting and finishing stage, respectively. Overall mean concentrate intake to body weight at steer groups was 1.94%, which is 1.8 and 1.81% higher compared to bull and steer+zeranol groups, respectively. Feed conversion ratio(DM) during overall period was the worst at steer groups as 9.321g, and also net energy conversion ratio was similar to DM conversion ratio.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.99-103
• /
• 2005

In this paper, a novel circuit topology of a three-winding coupling inductor-assisting a high-frequency PWM boost chopper type DC-DC power converter with a high boost voltage conversion ratio and low switch voltage stress is proposed for the new energy interfaced DC power conditioner in solar photovoltaic and fuel cell generation systems. The operating principle in a steady state is described by using its equivalent circuits under the practical condition of energy processing of a lossless capacitive snubber. The newly-proposed power MOSFET boost chopper type DC-DC power converter with the three-winding coupled inductor type transformer and a single lossless capacitor snubber is built and tested for an output power of 500W. Utilizing the lower voltage and internal resistance power MOSFET switch in the proposed PWM boost chopper type DC-DC power converter can reduce the conduction losses of the active power switch compared to the conventional model. Therefore, the total actual power conversion efficiency under a condition of the nominal rated output power is estimated to be 81.1 ％, which is 3.7％ higher than the conventional PWM boost chopper DC power conversion circuit topology.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.337-345
• /
• 2012

To check effects of operating variables on reaction characteristics of WGS catalyst for SEWGS process, water gas shift reaction tests were carried out in a pressurized fluidized bed reactor using commercial WGS catalyst and sand(as a substitute for $CO_2$ absorbent) as bed materials. Simulated syngas(mixed with $N_2$) was used as a reactant gas. Operating temperature was $210^{\circ}C$ and operating pressure was 20 bar. WGS catalyst content, steam/CO ratio, gas velocity, and syngas concentration were considered as experimental variables. CO conversion increased as the catalyst content and steam/CO ratio increased. CO conversion at fluidized bed condition was higher than that of fixed bed condition. However, CO conversion were maintained almost same value within the fluidized bed condition. CO conversion decreased as the syngas concentration increased. The optimum operation condition was confirmed and long time water gas shift reaction test up to 24 hours at the optimum operating conditions was carried out.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.95-100
• /
• 2019

연속압입시험법은 기존의 잔류응력 측정기법에 대한 대체기법으로 많은 분야에서 연구되고 있다. Knoop 압입자는 이러한 압입시험에서 잔류응력의 방향성을 결정하기 위해 이용되어 왔다. 기존 연구에 의하면 Knoop 압입자의 두 가지 응력환산계수의 비는 실험적으로 0.34로 고정되어 있는 것으로 알려져 있으나 이에 대하여 정량적인 분석이 부족하고, 깊이에 따른 실험결과는 미비하여 산업현장에 적용하기에 장벽이 존재한다. 본 연구에서는 연속압입시험법을 이용한 잔류응력의 방향성 측정을 위하여 응력환산계수의 비를 유한요소해석을 이용하여 측정하였다. 본 연구에서는 유한요소해석을 이용하여 압입깊이에 따른 응력환산계수의 비를 분석하고자 하였다. 이론적인 Knoop 압입자와 시편을 모델링하여 일축 잔류응력 상태에서 각각의 응력환산계수를 산출하였다. 압입자 장축 및 단축 방향의 응력환산계수를 주어진 깊이에 따라 예측할 수 있는 모델을 제시하였고, 그 원인을 분석하였다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.316-321
• /
• 2023

In this study, we developed a conversion core that produces power by utilizing the unused magnetic field in a switchboard. The conversion core makes it possible to utilize power that is normally wasted. The conversion core is composed of a core, filter, and battery. A prototype was installed in a switchboard to conduct tests on the output, battery storage, and output boosting of multiple batteries. Energy was harvested from the magnetic field generated by a busbar of the switchboard, and the power conversion ratio of the core yielded 1.08-1.01 mW per 1 A of bus current. Supplying this technology to the market after further R&D and commercialization is expected to greatly assist in the dissemination of energy harvesting, which has not yet spread widely to the general public.

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.100-108
• /
• 2011

The use of biogas as an energy source reduces the chance of possible emission of two greenhouse gases, $CH_4$ and $CO_2$, into the atmosphere at the same time. Its nature of being a reproducible energy source makes its use even more attractive. This research if for the hydrogen production through the steam reforming of the biogas. The biogas utilized 3D-IR matrix burner in which the surface combustion is applied. The nickel catalyst was used inside a reformer. Parametric screening studies were achieved as Steam/Carbon ratio, biogas component ratio, Space velocity and Reformer temperature. When the condition of Steam/Carbon ratio, $CH_4/CO_2$ ratio, Space velocity and Refomer temperature were 3.25, 60%:40%, 19.32L/$g{\cdot}hr$ and $700^{\circ}C$ respectively, the hydrogen concentration and methane conversion rate were showed maximum values. Under the condition mentioned above, $H_2$ concentration was 73.9% and methane conversion rate was 98.9%.

• 공업화학
• /
• 제18권4호
• /
• pp.361-365
• /
• 2007

LiCl-KCl 공융염 내 존재하는 몇가지 희토류염화물($Ce/Nd/GdCl_3$)들의 산소와의 반응으로 인한 침전반응에 대한 연구를 수행하였다. 산소와의 반응으로 형성되는 희토류침전물의 형태와 산소분산 시간(최대 420 min) 및 공융염($450{\sim}750^{\circ}C$) 온도가 침전물로의 전환율에 미치는 영향을 규명하였다. 본 연구결과 산소분산 시간 및 공융염의 온도와 무관하게 $NdCl_3$ 및 $GdCl_3$는 옥시염화물(REOCl), $CeCl_3$는 산화물($REO_2$)형태로 침전되었으며 이러한 실험결과는 반응 Gibbs free energy (${\Delta}G_r$) 를 이용한 예측 결과와도 일치하였다. 희토류염화물의 침전물로의 전환특성은 전환율 개념을 도입하여 파악하였다. 전환율은 산소분산 시간이 증가함에 따라서 지수적으로 증가하였으며 $750^{\circ}C$의 공융염 온도 및 300 min 이상의 분산시간 조건에서 0.999 이상의 전환율을 나타내었다. 공융염 온도가 증가함에 따라서 전환율이 증가하였다. Ce의 경우에는 60 min 이상의 산소분산 조건에서 전 실험온도 범위에서 0.999 이상의 일정한 전환율을 나타내었다

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.190-199
• /
• 2017

Air-blown Gasification of coal and torrefied biomass mixture is conducted on fixed-bed gasifier. The various ratio (9:1, 8:2, 7:3) of coal and torrefied biomass mixture are used. The contents of $H_2$, CO in the syngas were increased with gasification temperature. Carbon conversion tend to increase with temperature and equivalence ratio (ER). However, cold gas efficiency showed maximum point in ER range of 0.26-0.36. The torrefied biomass showed highest cold gas efficiency of 67.5% at $934^{\circ}C$, ER 0.36. Gasification of 8:2 mixture showed the highest carbon conversion and cold gas efficiency and synergy effect.