• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.451-458
• /
• 2002

This paper introduces that livestock can be effectively managed by an individual electronic identification system. The proposed system was composed of the original code transmitter, receiver, personal computer, micro-processor, and RS485 telecommunications module. In the individual electronic identification system, the signal including encoded information of a milk-cow was transmitted from an original code transmitter to a micro-processor through RS485 telecommunications module. The transmitted signal can be successfully displayed in a personal computer. This system can be managed by 9999 individuals with a original code transmitter. The recognition rate of an individual electronic identification system was 98.5% and also auto-feeder operates very well. an individual electronic identification system was developed for automation of stockbreeding management. To automate the breeding management, it is necessary to obtain and analyze the individual information distinguished from others preferentially.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.3-7
• /
• 1991

Considering the relatively large amount of stable flexural teat results available for steel fiber reinforced concrete (SFRC) and their dependency on the constitutive behavior of the material, a technique called “System Identification” is used for interpretating the flexural test data in order to obtain basic information on the tensile constitutive behavior of steel fiber reinforced concrete. “System Identification” was successful in obtaining optimum sets of parameters which provide satisfactory matches between the measured and predicted flexural load-deflection relationships.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1008-1015
• /
• 2007

The primary purpose of the safety management is to prevent the loss of lives or physical damages arising from potential hazards in the railroad signaling system. Since such potential hazards may occur at any time during the system life cycle from design and development to maintenance, safety management activities have to be continuously taken in the course of the system life cycle. The identification of potential hazards is the early step of the safety management. However, such identification activities have to be continued during the system life cycle. Further, they have to be closely linked with system functions to prevent functional problems. This study provides a systematic approach to identification of potential hazards for their tracking and management during the system life cycle to assure the identification and definition of the most appropriate hazards.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.101-108
• /
• 1999

A discrete system has interpreted by using the network model, and PERT network is one of these methods. For the purpose of analysing the real system. it is necessary to measure the parameter of the real system. And system identification problem is to assume the parameter of a real system when we get to know the system model, the input data and output data. System identification method has been only developed to a system of which a structure has expressed a differential equation or a polynomial expression. But it has been scarcely developed yet in that case of network model. The aim of this paper is to examine a changes when new system isn introduced to the present system, The changes are as follows: how the present system will be changed, when the changes will be happened. In this paper, genetic algorithm is used to assume the parameter.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.155-163
• /
• 2000

A discrete system has interpreted by using the network model, and PERT network is one of these methods. For the purpose of analysing the real system, it is necessary to measure the parameter of the real system. And system identification problem is to assume the parameter of a real system when we get to know the system model, the input data and output data. System identification method has been only developed to a system of which a structure has expressed a differential equation or a polynomial expression. But it has been scarcely developed yet in that case of network model. The aim of this paper is to examine a changes when new system is introduced to the present system. The changes are as follows : how the present system will be changed, when the changes will be happened. In this paper, genetic algorithm is used to assume the parameter.

• Phonetics and Speech Sciences
• /
• v.1 no.1
• /
• pp.63-67
• /
• 2009

In this paper, in order to protect music copyrights, we propose a music identification system which is scalable to the number of pieces of registered music and robust to signal-level variations of registered music. For its implementation, we define the new concepts of 'music word' and 'music phoneme' as recognition units to construct 'music acoustic models'. Then, with these concepts, we apply the HMM-based framework used in continuous speech recognition to identify the music. Each music file is transformed to a sequence of 39-dimensional vectors. This sequence of vectors is represented as ordered states with Gaussian mixtures. These ordered states are trained using Baum-Welch re-estimation method. Music files with a suspicious copyright are also transformed to a sequence of vectors. Then, the most probable music file is identified using Viterbi algorithm through the music identification network. We implemented a music identification system for 1,000 MP3 music files and tested this system with variations in terms of MP3 bit rate and music speed rate. Our proposed music identification system demonstrates robust performance to signal variations. In addition, scalability of this system is independent of the number of registered music files, since our system is based on HMM method.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.369-378
• /
• 2021

This paper reviewed a few output-only system identification algorithms and identified the shortcomings of those popular blind source separation methods. To address the issues such as less sensors than the targeted modal modes (under-determinate problem), repeated natural frequencies as well as systems with complex mode shapes, this paper proposed a complex wavelet modified second order blind identification method (CWMSOBI) by transforming the time domain problem into time-frequency domain. The wavelet coefficients with different dominant frequencies can be used to address the under-determinate problem, while complex mode shapes are addressed by introducing the complex wavelet transformation. Numerical simulations with both high and low signal-to-noise ratios validate that CWMSOBI can overcome the above-mentioned issues while obtaining more accurate identified results than other blind identification methods.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.387-396
• /
• 2005

The Rotational/Translational Actuator (RTAC) benchmark problem considers a fourth-order dynamical system involving the nonlinear interaction of a translational oscillator and an eccentric rotational proof mass. This problem has been posed to investigate the utility of a rotational actuator for stabilizing translational motion. In order to experimentally implement any of the model-based controllers proposed in the literature, the values of model parameters are required which are generally difficult to determine rigorously. In this paper, an approach to the least-squares estimation of the parameters of a system is formulated and practically applied to the RTAC system. On the other hand, this paper shows how to model a nonlinear system as a linear uncertain system via nonparametric system identification, in order to provide the information required for linear robust $H_\infty$ control design. This method is also applied to the RTAC system, which demonstrates severe nonlinearities, due to the coupling from the rotational motion to the translational motion. Experimental results confirm that this approach can effectively condense the whole nonlinearities, uncertainties, and disturbances within the system into a favorable perturbation block.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.25-31
• /
• 2002

A system identification method is introduced to increase the prediction accuracy of a ship's maneuverability in PMM test, analysis. To improve the accuracy of linear hydrodynamic coefficients, the analysis techniques of pure sway and yaw tests are developed, and confirmed. In the analysis of sway tests, accuracy to linear hydrodynamic coefficients depends on the frequency of sway motion. To obtain nonlinear hydrodynamic coefficients for large drift angles, a combined yaw test is introduced. Using this system identification method, runs of PMM test can be reduced while retaining sufficient accuracy, compared to the Fourier integration method. Through the comparisons with sea trial results and the Fourier integration method, the accuracy and efficiency of the newly proposed system identification method, based on least square method, has been validated.

• Spatial Information Research
• /
• v.2 no.1
• /
• pp.85-92
• /
• 1994

This study examines the unique characteristics of the parcel identification number especially in developing the Korean land information system(KLIS). There are several limitations in establishing KLIS in terms of the location identification. Therefore, it is necessary to develop the appropriate parcel identification number system in Korea including the road identification systym and the three dimensional parcel identification system. The exact parcel bounary also needs accurate surveying and registration.