• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.257-258
• /
• 2007

이 논문에서는 자동차 공기청정기의 성능을 테스트하기 위한 자동화 시험 장치를 설계 및 구현하였다. 기존의 수동시험장치의 경우 정확한 유량 조절이 불가능하여 성능시험평가결과에 오차가 크고 시험과정이 불편하였다. 본 논문에서는 신뢰성 높고, 자동제어가 가능한 시스템을 설계하기 위하여 유량센서, 압력센서, 온도 센서, 습도 센서들의 데이터를 데이터 수집 장치를 통해 수집하고, 컴퓨터 기반의 제어 및 계측 프로그램인 LabVIEW를 이용하여 제어 및 모니터링 프로그램을 제작하였다. 그래픽 기반의 LabVIEW를 이용함으로써, 사용자에게 편리한 인터페이스를 제공하고, 기존의 수동 시스템보다 정확한 성능테스트 데이터를 제공함으로써, 에어필터의 품질향상이 되도록 하기 위한 성능 테스트 장치를 제작한다.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.565-573
• /
• 2007

In this paper, we propose a method to select motion vector predictor by considering prediction structure of a multi view content for coding efficiency of multi view coding which is being standardized in JVT. Motion vector of a different tendency is happened while carrying out temporal and view reference prediction of multi-view video coding. Also, due to the phenomena of motion vectors being searched in both temporal and view order, the motion vectors do not agree with each other resulting a decline in coding efficiency. This paper is about how the motion vector predictor are selected with information of prediction structure. By using the proposed method, a compression ratio of the proposed method in multi-view video coding is increased, and finally $0.03{\sim}0.1$ dB PSNR(Peak Signal-to-Noise Ratio) improvement was obtained compared with the case of JMVM 3.6 method.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.206-208
• /
• 2004

본 논문에서는 LabIEW를 이용하여 필터(RF 수동회로)의 주파수 특성을 테스트하고 테스트한 필터의 특성정보를 관리하는 필터 품질 자동화 시스템을 개발하였다. 개발된 시스템은 LabVIEW에 의해 GPIB 통신으로 계측장비 네트워크 어날라이저를 제어하며 제작된 필터의 S파라미터를 측정하여 명세 기준에 적합하게 제작되었는지를 판별하며 그 결과를 Mysq데이터베이스에 저장하고 관리하게 된다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1928-1934
• /
• 2014

Induction motors are widely used due to their rugged, robust and easy to care features. Since they are heavily used in industry, testing of three phase induction motors have play a vital role. In order to determine motor equivalent circuit parameters, efficiency of motor, squirrel caged laboratory sized an induction motor test setup is prepared. It is suitable for the induction motor with the frame size of 100 and 112. A virtual Instrumentation typed engineering workbench (called as LabVIEW) software packet, is utilized as a graphical user interface program. Motor input power is measured by measuring the input voltage, current and power factor with the help of hall effect typed voltage and current transformers. Also, the output power is measured by measuring the speed and torque with the help of an encoder and torque sensor. All outputs of the voltage and current transformer, encoder and temperature, torque sensors are given to the Data Acquisition Card (DAQ) which acquires the data for processing and then the equivalent circuit parameters, efficiency, performance and loading characteristics are found out, using LabVIEW based user interface. It is suggested to use this test rig for the quality control of produced motors in industry, and an educational experiment setup in the school laboratories.

• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.5-11
• /
• 2003

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.160-166
• /
• 2012

We performed the development and performance evaluation of reflective type heart rate measurement system for PAPS. We used chip LED and chip photo TR. for low power driving. The measured PPG signal is preprocessed using high pass filter and low pass filter, and the preprocessed signal is displayed by LabVIEW. Also LabVIEW include the algorithm that extract effective signal and calculate the heart rate. We made sure that it will be able to apply to measurement equipment with high accuracy and repetition from exercising subject using this system and algorithm.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2277-2287
• /
• 2015

In recent times, multilevel inverters are given high priority in many large industrial drive applications. However, the reliability of multilevel inverters are mainly affected by the failure of power electronic switches. In this paper, open-switch and short-switch failure of multilevel inverters and its identification using a high performance diagnostic system is discussed. Experimental and simulation studies were carried out on five level cascaded H-Bridge multilevel inverter and its output voltage waveforms were analyzed at different switch fault cases and at different modulation index values. Salient frequency domain features of the output voltage signal were extracted using the discrete wavelet transform multi resolution signal decomposition technique. Real time application of the proposed fault diagnostic system was implemented through the LabVIEW software. Artificial neural network was trained offline using the Matlab software and the resultant network parameters were transferred to LabVIEW real time system. In the proposed system, it is possible to precisely identify the individual faulty switch (may be due to open-switch (or) short-switch failure) of multilevel inverters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.37-41
• /
• 2007

Fast Fourier Transformation(FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Excitation is a factor or process making noise or vibration. It's typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system by frequency analysis. There are harmonic excitation, impact excitation, random excitation, sweep excitation, chirp excitation and so on as the ideal method in an experiment using exciter. In this thesis, excitation testing module for NI-PXI equipment is developed. The analyzing module is developed with LabVIEW tool. A user can generate each waveform for shaking a structure and see quickly and easily modal shape of system with this module. This developed module will be expected to build up more convenient and serviceable measurement system.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.69-74
• /
• 2009

Monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind turbine in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house, and of utilizing the measured data(fatigue data and electric analyzing data of wind turbine)for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind turbine during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system(BusDAQ) was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized. Also, This paper is introduced to make the best use of the developed monitoring system and to explain about construct of the system and detailed data communication of its system.