• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.578-585
• /
• 2006

Cavitation related erosion damages on semi-spade rudder generally occur at around leading edge of lower-face and behind gap of lower pintle. To get the idea of gap entrance profile for the latter case, a series of tests with large models has been carried out at MOERI. In the tests, the flow pattern around lower pintle have been investigated and visualized by high speed camera. Additionally, cavitation inception tests and pressure measurements have also been conducted for better comparison. As a result a new model (F rudder) has been developed. The new model turned out to have stable pressure distribution along the surface and so the cavitation inception speeds within ${\pm}5^{\circ}$ of rudder angle were delayed approx. 4 knots in average.

• Journal of Labour Economics
• /
• v.40 no.1
• /
• pp.69-97
• /
• 2017

This paper estimates the public and private sector wage gap trend from 2000 to 2014 using 'Korean Labor and Income Panel Study.' We account for unobserved fixed effect by using 1st differencing log wage in order to allow the gap to vary over time. Standard OLS estimates present the public sector wage is 10% higher than private sector on average. Moreover, the public sector wage premium displays the inverted V shape: sharply increasing up to 2006 and decreasing from 2007 to 2014. However, after controlling unobserved fixed effect, the public sector wage premium disappears and does not display the inverted V shape any more.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.800-805
• /
• 2000

In an effort to facilitate fabrication procedure of all ceramic crowns, a novel preparation method for all ceramic crown using alumina tape was developed. The alumina tape having a uniform thickness was cast by using Doctor blade method. The physical properties of newly introduced alumina tape has biaxial flexure strength of $500\sim600MPa$. The value of toughness is $3.18\sim3,28MPa.m^{1/2}$ which corelates with fracture and the linear shrinkage rate of the alumina tape is 0.44% during core production. The marginal fitness of the alumina tape all-ceramic restoration with $90{!`}$shoulder margin had average marginal discrepancy at $78.3{\S}$ > and average marginal gap at $44.4{\S}$ >. At the marginal preparation of $135{!`}$deep chamfer, the average marginal discrepancy at $82.1{\S}$ > and the average marginal gap at $40.2{\S}$ > had been reported. This fabrication procedure of all ceramic crowns with alumina tapes is easier and less technical sensitive for dental technicians. After restoration with new all ceramic crowns we followed the patients 2 years later, there were no complications as porcelain fractures or periodontal disease. We had good esthetic clinical results with new all ceramic crowns.

• Journal of Industrial Convergence
• /
• v.18 no.2
• /
• pp.19-26
• /
• 2020

This study analyzed the status and trend of gender wage gap among listed companies in KOPSI market over the 2000-2017 period. The main results of the study are as follows. First, the gender employment gap index for KOSPI listed companies stood at 39.81 in 2017, with 40 women per 100 men being employed. Although the absolute value of the proportion of female employment remains low, it has not only been higher than 33.74 in 2000 but has also increased steadily in recent years. In terms of the number of years of service, the average number of male employees in 2017 was 9.9 years, compared with 6.9 years for female employees, and the gender tenure gap decreased over the past few years. Finally, The gender wage gap index increased from 60.57 in 2000 to 67.87 in 2017. In addition, there are slight variations in the size of the company or industry, but consistent results have shown that the gender wage gap decreases in recent years. The findings suggest that our society is developing in a way that reduces the gender employment gap and the gender wage gap.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.131-141
• /
• 2013

At the interface of reducing agricultural income and increasing unemployment in agrarian economy of rural India, this article summarizes and evaluates the state of mulberry sericulture in northwest India, which includes Himachal Pradesh, Punjab, Rajasthan, Uttarakhand, and Uttar Pradesh. In $11^{th}$ plan period (2007-2012), there was an addition of 6 196 ha (217.09 %) of mulberry acreage at annual linier growth rate of 33.44%. However, total silk production could increase only by 54.64 MT (78.57%) at annual linier growth rate of 15.59 %, due to 43.93% (10.82 kg/ha) reduction in silk productivity at negative growth rate of -13.46%, annually. And now, average raw silk productivity in north-western states of India remains at 13.81 kg/ha, which is lower by 452.93 % (76.36 kg) in comparison to the national average of 100.90 kg/ha. Paper summaries the reasons for increasing cocoon yield gap at farmer's level and discuss the ways and means to increase raw silk productivity to improve the livelihood delivery of mulberry sericulture in northwest India.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.32 no.2
• /
• pp.81-86
• /
• 2021

Background and Objectives Therapies have been reported to treat the glottal gap previously. However, these voice therapies showed the limits because many techniques focused only on one among breathing, resonance and phonation. In addition patients often have difficulties visiting hospital frequently. 'Gliding and humming' is vocal training technique that readjusts total vocal patterns such as breathing, resonance and phonation. This technique can be easily applied during short term sessions. The purpose of this study is to evaluate the efficiency of voice therapy with 'gliding and humming' for patients with glottic gap during short-term treatment sessions. Materials and Method Twenty-three patients with glottal gap were selected. Of all patients, 14 patients had sulcus vocalis and 12 patients had muscle tension dysphonia (MTD). Voice therapies were performed 1.9 sessions in average. GRBAS, jitter, shimmer, noise to harmonic ratio, semitone range, closed quotient_vowel and maximum phonation time were compared before and after the therapies. In addition, changes of glottal gap and MTD severity were evaluated. Results Statistically significant improvement was observed. MTD improvement was observed only among the patients with glottal gap improvement. Also sulcus vocalis group showed the statistically significant improvement. Conclusion 'Gliding and humming' was effective to the patients with glottic gap and sulcus vocalis. Also, among patients who have both glottic gap and MTD, the data suggests that voice therapy for glottic gap also makes improvement in MTD.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.149-155
• /
• 2012

Purpose: Long Extension (LE) is used in proton therapy for lung and abdomen. However, it has limitations in surface area, produces collision in posterior oblique beam which creates limitations in various gantry angles in planning therapy and increases air gap (distance between patient and compensator). Therefore, this study investigates the usability of manufactured Rounded Extension (RE) in comparison to LE to use the most suitable extension in proton therapy. Materials and Methods: To compare structural features of LE and RE. This study investigated usable gantry angle for snout sizes 100, 180 and 250 and CT scanned Humanoid phantom. And it compared the air gap in posterior oblique direction. Results: The structural features of two extensions are as follow. Because of the existence of supporting bar, the width of LE was 40 cm and RE was 50 cm. Result of the investigation of usable gantry angle for snout sizes 100, 180 and 250 are as follow. LE is ${\pm}36$ (average) at 180 degree and RE is ${\pm}70$ (average). And also, the air gap of RE is decreased by 11.3 cm in average at the same gantry angle. Conclusion: Manufactured RE for proton therapy has several benefits than LE. Its therapy surface area is wider and range of usable gantry angle is also wider. Also, the air gap at the posterior oblique beam has decreased. Therefore the usability of RE in proton therapy of lung and abdomen will be increased compared to LE. However, the air gap of proton therapy at the lateral direction may be increased, so there may be need for make up to decrease air gap at the lateral direction in the future.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2015

Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.150-158
• /
• 2002

Local heat/mass transfer and friction loss in a square duct roughened with various types of continuous and discrete rib turbulators are investigated. The combined effects of the gap flows of the discrete ribs and the secondary flows are examined for the purpose of the reduction of thermally weak regions and the promotion of the uniformity of heat/mass transfer distributions as well as the ;augmentation of average heat/mass transfer. The rib-to-rib pitch to the rib height ratio (p/e) of 8 and the rib angles of 90° and 60° are selected with e/D$\_$h/=0.08. The vortical structure of the secondary flows induced by the parallel angled arrays are quite distinct from that induced by the cross angled arrays. This distinction influences on heat/mass transfer and friction loss in all the tested cases. The gap flows of the discrete ribs reduce the strength of the secondary flows but promote local turbulence and flow mixing. Consequently, the angled discrete ribs with the small gaps provide a more uniform heat/mass transfer distribution sustaining high average heat/mass transfer.

• Journal of Oriental Neuropsychiatry
• /
• v.12 no.2
• /
• pp.17-25
• /
• 2001

Objectives: Obesity is related to psychological problems as well as physical problems. This study was designed to investigate the eating attitude and depression of females who participated in a fasting therapy. They were considered to have many eating attitude and psychological problems. Methods: 59 females were selected, they were admitted in Woosuk university hospital of oriental medicine(from August 1st, 2000 to July 31th, 2001) and 42 females were selected, they were college students of Woosuk university, Jeonju, Korea. We checked height, weight and administerd the Korean Eating Attitudes Test-26(KEAT-26), Beck Depression Inventory(BDI) and questions about binge-eating, smoking, drinking, exercise and body weight-wanted to females in two groups. Results: In fasting women group, 2(3.39%) were underweight, 24(40.68%) were average. The average of KEAT-26 in fasting women group$(13.33{\pm}7.65)$ was higher than that in college women group$(4.76{\pm}5.54)$(p<0.001). In fasting women group, 5(8.47%) had mild eating problem, 4(6.78%) had moderate eating problem, and 5(8.47%) had severe eating problem. In fasting women group, 47(79.66%) said 'yes' at the question(A-1, DSM-IV bulimia nervosa diagnosis), 33(55.93%) said 'yes' at the question(A-2, DSM-IV bulimia nervosa diagnosis) about binge eating. In fasting women group, 14(23.73%) had used vomiting, 13(22.03%) enemas, 27(45.76%) laxatives, 7(11.86%) diuretics, 6(10.17%) other drugs, 38(64.41%) fasting, 15(25.42%) severe exercise, and others 2(3.39%) to reduce their weight. The average of BDI in fasting women group$(12.44{\pm}6.70)$ was higher than that in college women group$(7.47{\pm}5.48)$(p<0.001). In fasting women group, 10(16.95%) had mild depression problem, 4(6.78%) had moderate depression problem, and 3(5.08%) had severe depression problem. In fasting women group, 41(64.49%) had under 5Kg-gap, and 18(30.51%) has over 5Kg-gap between weight-reasonable and weight-wanted. In 26 fasting women who were underweight or average-weight, 14 had over 5Kg-gap. Conclusions: These results suggest that the females who participated in a fasting therapy had many depression and eating problems, and we should pay attention to the eating disorders and psychological problems including depression as well as the physical problems when we treat obesity.