• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.165-171
• /
• 2005

태풍이 내습하면 선박은 이를 피해 적절한 묘박지를 선정하여 묘박하게 된다. 묘박 중인 선박은 일단 태풍의 영향권에 들어가면 바람, 파도 및 해${cdot}$조류에 의해 발생되는 외력와 이에 대응하여 묘와 묘쇄에 의한 파주력 및 기관 추진력에 의한 선박의 대응력이 서로 균형을 이룸으로써 주묘되지 않고 안전하게 견딜 수 있다. 본 연구에서는 묘박 중인 선박이 주묘되지 않고 견딜 수 있는 외력의 한계를 이론적으로 분석할 수 있는 방법을 제시하고, 이를 2003년 9월 태풍 매미가 내습했을 당시 진해만에 묘박했던 선박에 적용해봄으로써 그 타당성을 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.593-598
• /
• 2002

Routinely, strength method for the determination of the nominal moment of reinforced concrete beam is assumed to also be suitable for strengthening beams with carbon fiber sheets since typically strengthening beams compromise 98% by volume of reinforced concrete. Flexural capacity of strengthening beam is absolutely dependent upon the type of reinforcement materials, amount of reinforcement, anchoring system, adhesion capacity between reinforcement material and concrete. Therefore, it might be incorrect to use strength method for analysis and design of strengthening beam without considering the differences in the load-deflection curves, mechanism of failure, state of stress distribution, failure strain of the reinforcement. An flexural analysis based on force equilibrium and strain comparability has been developed for strengthening beam. Systematic experimental investigations are compared with analytical results. Then, the adaptation of strength method for strengthening beam have also been discussed.

• 대한두개안면성형외과학회지
• /
• 제23권4호
• /
• pp.187-189
• /
• 2022

Patients with pixie ear have an attached, tapering, and low-set earlobe. Traditional methods usually describe excision of the caudal portion of the lobule and reattachment in a more superior position. The present report suggests a simplified skin redraping method for correction of pixie ear. The procedure provides easy method to design and perform, which only requires elevation and trimming of the skin. Other ancillary procedures, such as flap design, anchoring, plication, and subdermal fixation, are not required. This method produces satisfactory results. Postoperative scar is invisible because the incision is on the retroauricular region, and the corrected earlobe has a more natural appearance than the repositioned earlobe. Moreover, skin redraping avoids tension, which contributes to minimization of the postoperative scar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.266-269
• /
• 2006

External pre-stressing strengthening method is the most popular way to strengthen concrete structures because of its efficiency and economic advantage. The laboratory test was performed to reinforce the slave bridge with the external tendon strengthening by longitudinally and transversally, which is concerned with formal feature of slave bridge, generally. Based on this test, anchoring device to strengthen the external tendon strengthening method was established and its strengthening effects were verified by evaluating the load bearing capacity.

• 자원ㆍ환경경제연구
• /
• 제9권4호
• /
• pp.747-771
• /
• 2000

This paper reports the results of a study to elicit willingness to pay (WTP) for changes in health risks from exposure to As, Pb, THM in tap water using experimental market method. The experimental market method, compared with other non-market valuation methods, allows us to use incentive compatible demand revealing scheme, to acquire market-like experience through repetitive auctions, and to incorporate learning process by providing new information during the session. Participants seemed to utilize the objective risk information in a 'rational' manner, and to change their WTP bids accordingly. Moreover they were able to reduce the 'ambiguity' in risk perception processes when objective risk probabilities provided are quite different from their subjective perceptions. Nonetheless, anchoring effects appeared to be still persistent in spite of market-like experience and learning opportunity. And implicit values entailed by WTP bid/risk tradeoffs indicate a wide variation in values across alternative risk reductions and overrated responses to very small risk reductions.

• 한국강구조학회 논문집
• /
• 제21권2호
• /
• pp.135-144
• /
• 2009

본 논문은 기존 SC합성보에 비부착 긴장재의 정착위치와 도입된 긴장량을 변수로하여 포스트텐션 공법으로 휨보강을 실시한 실험체의 보강성능을 평가하여 적절한 휨보강 방법을 제시하고자 하였다. 실험은 각 유형별 실험체를 항복하중까지 가력하고 항복 이후 비부착 포스트텐션 보강을 실시 추가 가력하여 보강성능을 조사하였다. 실험결과 보강된 SC합성보는 보강전에 비해 향상된 항복내력 및 초기강성을 나타냈으며 최대내력의 실험값/이론값은 보강 후 ${0.95{\sim}1.13}$으로 나타났다. 보강 전 중립축과 그 상부에 정착구를 설치한 실험체(D160, 240계열)는 최대내력에서 긴장력의 차이에 따른 변화는 거의 없고 오히려 긴장력이 증가하면 연성이 감소하였으며 보강 후 중립축에 졍착구를 설치한 실험체(D120계열)는 긴장력이 증가하면 최대내력이 증가하고 또한 연성도 증가하여 보강 후 중립축에 대한 적절한 긴장력 보강이 매우 유효함을 알 수 있었다.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.67-77
• /
• 2022

국내에서는 I형 거더의 장경간화를 위한 수단으로써 U형 거더 개발을 시도하였으나, 포스트텐션 긴장방식에 따라 큰 자중으로 인하여 30 m이하 철도교 적용 사례가 대표적이며, 도로교는 시공 편의성과 보급성 논리에 따라 U형 거더의 적용 사례는 많지 않다. 본 연구는 이러한 포스트텐션 방식에 제한을 두지 않고 프리텐션 방식을 적용하여 단면 감소에 따른 자중 감소와 사용재료 절감을 유도하고자 한다. 또한, U형 거더 내부 반력대를 이용한 현장 프리텐션 긴장방법을 적용하고자 한다. 프리스트레스트 콘크리트 U형 단면 거더 교량은 콘크리트 바닥판 슬래브와 합성단면으로 구성된다. 단면이 폐합되어 개방형 단면인 PSC I형 대비 저항 강성 등의 구조적 성능향상과 제작 및 가설 단계에서 시공의 안전성 증대, 그리고 자중 경감에 기인하는 형고비 감소와 교량의 미적 경관성 확보가 가능하여 매우 효율적이고 경제적인 교량이다. 이로 인하여 고품질의 공장제작 부재와 현장에서 일체 타설로 효율적인 시공이 가능할 것으로 기대된다. 본 논문에서는 프리텐션 현장 긴장 방식 소개 및 긴장을 위한 정착블럭의 해석적 성능 검증에 대한 내용을 수록하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1334-1337
• /
• 2009

A SMART anchor is a kind of friction mount anchor, the load is diffused and applied to the various parts of the distributed bond length, having less impact on the grout strength, and being able to secure necessary anchoring force in relatively soft grounds. Smart anchor can have strong loads in soft and weak grounds as in rock beds.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1133-1138
• /
• 1998

In this paper, we obtained the monodomain alignment of nematic liquid Crystal(NLC) in the cell fabricated by transcription alignment method on polyimide(PI) surface with side chain. It is considered that the LC alignment produced by the transcription alignment method is attributed to a memory effect of the NLC on PI surfaces. Also we observed that the generated pretilt angle of NLC is about $3.7^{\circ}$ with transcription alignment on PI surface. Next, we measured that the voltage-transmittance characteristics of transcription-aligned TN-LCD are almost same compared to rubbing-aligned TN-LCD. Also, we measured that the curve of transcription-aligned TN-LCD is less sharp than that of the rubbing-aligend TN-LCD in the decay time characteristics. It is considered that the response time characteristics of transcription-aligned TN-LCD are attributed to the weak anchoring strength between the LC molecules and the polymer surface.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.