• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.97-105
• /
• 2023

The membrane structure should maintain the membrane materials in tension for structural stability guaranty. The anchoring part in the membrane structure is an important part. It has the function to introduce tension into membrane materials and function to transmit stress which membrane materials receives to boundary structure such as steel frames. In this paper, it grasps anchoring system of the anchoring part in the membrane structure concerning the fracturing characteristic condition of membrane structure, and the influence which is caused to yield it designates the stress state when breaking the membrane structure which includes the anchoring part and that stress transition mechanism is elucidated as purpose. This paper follows to previous paper, does 1 axial tensile test concerning the bolting part specimen, grasp of fracturing progress of the bolting part and the edge rope and hardness of the rubber, does the appraisal in addition with the difference of bolt tightening torque. As a result, the influence which the bolt anchoring exerts on the fracturing characteristics of the membrane material in the membrane structure anchoring part is examined.

• 대한토목학회논문집
• /
• 제32권4C호
• /
• pp.149-157
• /
• 2012

본 논문에서는 PVD의 설치를 위하여 사용되는 앵커슈에 의한 지반교란과 정착 메커니즘을 연구하기 위하여, 맨드렐-앵커슈의 관입과정과 인발과정을 모사하고, 시각화 할 수 있는 2차원 모형실험 시스템을 개발하였다. 개발된 시스템을 활용하여, 기존 사각판형 앵커슈와 쐐기가 달린 비대칭 앵커슈의 관입과 인발 과정을 모사하는 1g 모형실험과 원심모형실험을 수행하였다. 앵커슈 크기 및 종류에 따라 지반교란과 앵커슈 정착 성능을 확인하기 위해 크기가 다른 기존 사각판형 앵커슈와 쐐기형 비대칭 앵커슈의 설치과정을 모사하였다. 관입과정에서 촬영된 영상을 이미지 분석하여, 앵커슈의 크기 및 형태에 따른 점토의 교란을 시각화하고 분석하였다. 또한, 인발과정 모사를 통하여 앵커슈의 정착 메커니즘을 밝히고 인발시 정착력을 측정하여 정착 성능을 비교하였다. 그 결과, 앵커슈의 크기는 지반교란과 인발저항력 모두에 영향을 미치며, 비대칭 앵커슈가 기존의 앵커슈에 비해 지반교란 및 배수재 정착 성능을 향상시키는 것을 확인하였다.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.485-498
• /
• 2019

Pre-tensioned rock bolts can be classified into fully anchored, lengthening anchored and point anchored bolts based on the bond length of the resin or cement mortar inside the borehole. Bolts in varying anchoring methods may significantly affect the supporting effect of surrounding rock around a tunnel. However, thus far, the theoretical basis of selecting a proper anchoring method has not been thoroughly investigated. Based on this problem, 16 schemes were designed while incorporating the effects of anchoring length, pretension, bolt length, and spacing, and a systematic numerical experiment was performed in this paper. The distribution characteristics of the stress field in the surrounding rock, which corresponded to various anchoring scenarios, were obtained. Furthermore, an analytical approach for computing the active and passive strengthening index of the anchored surrounding rock is presented. A new fully anchoring method with pretension and matching technology are also provided. Then, an isolated loading model of the anchored surrounding rock was constructed. The physical simulation test for the bearing capacity of the model was performed with three schemes. Finally, the strengthening mechanism of varying anchoring methods was validated. The research findings in this paper may provide theoretical guidelines for the design and construction of bolting support in tunnels.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.357-358
• /
• 2014

Coherent anti-Stokes Raman spectroscopy is one of the best tools to measure temperature distributions in the flame. Since it does not disturb the flow field, it could be used to study anchoring mechanism especially in the lifted flame. However, the length of probe volume is, normally, much greater than flame thickness. This weak point was overcome with lens combination in this study. It was found out that no peculiar temperature changes was happened near tribrachial point and heat transfer to the upstream was minimal near the flame anchoring position.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.305-312
• /
• 2021

There is a gradual increase in the need for energy charging in marine environments because of energy limitations experienced by electric ships and marine robots. Buoys are considered potential energy charging systems, but there are several challenges, which include the need to maintain a fixed position and avoid hazards, dock with ships and robots in order to charge them, be robust to actions by birds, ships, and robots. To solve these problems, this study proposes a smart buoy robot that has multiple thrusters, multiple docking and charging parts, a bird spike, a radar reflector, a light, a camera, and an anchor, and its mechanism is developed. To verify the performance of the smart buoy robot, the position control under disturbance due to wave currents and functional tests such as docking, charging, lighting, and anchoring are performed. Experimental results show that the smart buoy robot can operate under disturbances and is functionally effective. Therefore, the smart buoy robot is suitable as an energy charging system and has potential in realistic applications.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.698-705
• /
• 2005

This study contains actual scaled site experiments on mediation factors affecting ultimate pulling force of the buoyancy resisting anchor which is installed underground water level suffering buoyancy force and breaking mechanism. Site buoyancy test selected the buoyancy acting site where acting buoyancy to the station structure since the stream and reservoir is neighboured to the vicinity ground and executed site experiments leading to variation of anchoring length, drilling diameter and tendon diameter at the weathered rock ground. The test result showed that pulling force getting increased more and more proportionate to increase of anchoring length, drilling diameter and tendon diameter, and as a result of analysis for correlations between anchoring length-ultimate limited load and drilling diameter-ultimate load (on the basis of 254mm settlement), modulus of correlation showed very high relation 0.9 and 0.99 respectively and correlation formular showed the limited load is increasing proportionate to cubic meters of anchoring length as well as the ultimate load proportionate to alignment of drilling diameter. It is also showed that limited load increased about 42.5% from 392kN to 559kN as a result of change the tendon diameter to 36mm and 50mm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.755-758
• /
• 2005

The mechanism responsible for liquid crystal (LC) alignment on solid substrates treated with mechanical rubbing or polarized UV is not understood. The results of x-ray reflectivity study of LC alignment on a large number of different alignment layers show that the anisotropy in the surface roughness of the substrate completely determines the LC alignment. The anchoring energy depends on the degree of roughness anisotropy and chemical interactions between the substrate and LC molecules.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.697-706
• /
• 2022

In order to explore the stable anchoring conditions of coal side under the mining disturbance of soft section coal pillar in Wangcun Coal Mine of Chenghe Mining Area, the distribution model of the anchoring support pressure at the coal pillar side was established, using the strain-softening characteristics of the coal to study the distribution law of anchoring coal side support pressure. The analytical solution for the reinforcement anchorage stress in the coal pillar side was derived with the inelastic state mechanical model. The results show that the deformation angle of the roadway side and roof increases with the roof subsidence due to the mining influence at the adjacent working face, the plastic deformation zone extends to the depth of the coal side, and the increase of anchorage stress can effectively control the roof subsidence and further deterioration of plastic zone. The roadway height and the peak support pressure have a certain influence on the anchorage stress, the required anchorage stress of the coal side rises with the roadway height and the peak support pressure. The required anchorage stress of the coal pillar side decreases as the cohesion between the coal seam and the roof and floor and the anchor length increases. Then, applied the research result to Wangcun coal mine in Chenghe mining area, the design of anchor cable reinforcement support was proposed for the section of coal pillars side that has been anchored and deformed, which achieved great results and effectively controlled the convergence and deformation of the side, providing a safety guarantee for the roadway excavation and mining.

• 한국터널지하공간학회 논문집
• /
• 제19권2호
• /
• pp.249-263
• /
• 2017

팽창형 강관 록볼트의 설치 전 단면 형상은 ${\Omega}$형이어서, 팽창 중 거동은 기하학적 비선형 특성을 보인다. 기존 팽창형 강관 록볼트의 정착 거동에 관한 연구는 주로 이론적 방법이었다. 하지만 이론적 방법은 팽창형 강관 록볼트의 등방 팽창을 가정하므로, 실제 거동을 지나치게 단순화하였다. 본 연구에서는 강관 팽창 거동의 비선형성과 다양한 영향 특성을 고려한 수치해석을 이용하여, 팽창형 강관 록볼트의 정착 거동을 모사하였다. 본 해석을 통해 강관의 팽창 과정, 접촉응력 분포, 평균 접촉 응력 및 접촉 면적의 변화를 분석하였다. 암반의 탄소성 조건에 따라 강관의 접촉응력이 다르게 나타났는데, 탄성 조건의 암반에 설치된 강관에 비해 탄소성 조건의 암반에 설치된 강관에서 작은 접촉응력이 발생했다. 또한 암반의 강성에 따라 팽창형 강관 록볼트의 정착 거동이 달라졌다. 주어진 해석 조건에서 암반 강성이 0.5 GPa 이하 일 때 강관은 완전히 펴지지만, 암반 강성이 0.5 GPa보다 클 때 완전히 펴지지 않았다. 강관이 완전히 펴진 경우 암반 강성이 증가함에 따라 접촉응력의 크기가 증가했지만, 강관이 완전히 펴지지 않은 경우 암반 강성이 증가함에 따라 접촉응력의 크기가 감소했다.