• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.93-94
• /
• 2006

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• 수산해양기술연구
• /
• 제37권4호
• /
• pp.257-266
• /
• 2001

경상대학교 해양과학대학의 실습선 새바다호를 사용하여 통영항 내의 동호만에서 1999년 9월 3~4일 사이에 투묘와 양묘를 포함한 선박의 궤적을 PATK-GPS 선간거리계측 시스템을 이용하여 위치와 거리 및 상대방위를 측정하고, 그 측위 정도의 유효성과 묘박의 실시간 가능성에 대하여 분석한 결과를 요약하면 다음과 같다. 1. 투묘 후 묘가 브로트업 앵커가 될 때까지의 시간은 4분이 소요되었고, 완전한 묘박 상태로 되어 선박의 궤적이 나타나기 시작하는데 요하는 시간은 10분 정도였다. 2. 묘박중 선체는 묘를 중심으로 하여 8자형의 요동운동을 나타내었다. 3. 측정 전체 시간대의 평균 묘박위치는 투묘위치로부터 북으로 49m, 동으로 89m로 편향되었다. 4. 선박의 궤적은 묘를 중심으로 하여 상태방위 $186.1^\circ$에서 $194.2^\circ$까지의 $8.1^\circ$ 폭 사이를 장반경 63m, 단반경 53m의 거리로 타원형에 가까운 궤적을 그리고, 반시계 방향으로 이동하는 경향이 있는 것으로 나타났다. 5. 선위의 분포 빈도가 가장 높은 것은 상대방위 $187^\circ$, 거리 558m 지점이었고, 가장 낮은 점은 상대방위 $194^\circ$, 거리 556m의 지점이었다. 6. PRTK-GPS는 거리와 방위를 동시에 측정할 수 있으므로 선박의 묘박에 요구되는 적정한 면적과 주묘의 상태를 연속적으로 정밀하게 파악할 수 있으므로 묘박의 감시에 매우 적절한 시스템이라 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.698-705
• /
• 2005

This study contains actual scaled site experiments on mediation factors affecting ultimate pulling force of the buoyancy resisting anchor which is installed underground water level suffering buoyancy force and breaking mechanism. Site buoyancy test selected the buoyancy acting site where acting buoyancy to the station structure since the stream and reservoir is neighboured to the vicinity ground and executed site experiments leading to variation of anchoring length, drilling diameter and tendon diameter at the weathered rock ground. The test result showed that pulling force getting increased more and more proportionate to increase of anchoring length, drilling diameter and tendon diameter, and as a result of analysis for correlations between anchoring length-ultimate limited load and drilling diameter-ultimate load (on the basis of 254mm settlement), modulus of correlation showed very high relation 0.9 and 0.99 respectively and correlation formular showed the limited load is increasing proportionate to cubic meters of anchoring length as well as the ultimate load proportionate to alignment of drilling diameter. It is also showed that limited load increased about 42.5% from 392kN to 559kN as a result of change the tendon diameter to 36mm and 50mm.

• 한국항해항만학회지
• /
• 제44권4호
• /
• pp.326-337
• /
• 2020

선박금융 의사결정에서 해운기업들은 비합리적인 의사결정을 선택하는 경우가 있으며, 이러한 결과는 해운기업들에 막대한 손실을 유발시킨다. 이러한 선박금융 의사결정 선택에 대한 분석을 본 연구는 행동재무학 이론 중 엥카링 효과와 매몰 비용 효과 이론으로 접근 하였으며, 설문지법과 사례 분석 방법론으로 논문을 작성하였다. 분석 결과, 행동재무학 이론인 엥카링 효과와 매몰 비용 효과가 선박금융 의사결정에 영향을 미친다는 사실과 이러한 영향으로 의사결정자가 비합리적인 의사결정을 선택하게 될 수 있다는 사실을 발견했다.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.5-9
• /
• 2003

The liquid crystal (LC) aligning capabilities by the washing processes after rubbing on the two kinds of the rubbed polyimide (Pl) surface were studied. The polar anchoring energy of 4-n-pentyl-4'-cyanobiphenyl (5CB) increased with the rubbing strength RS on the two kinds of the rubbed PI surface. The polar anchoring energy of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Also, the surface ordering of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Therefore, the surface ordering of 5CB strongly depends on the polymers and washing process.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.55-62
• /
• 2011

Although the performance of the commercial vessel has been dramatically improved through innovations, there has been no big changes on the traditional anchoring method of commercial vessels, both on design and operation until now. In this paper, two cases of design modifications were introduced for optimized design of pocket type anchor handling, which resulted in improved performance of the vessel's anchoring. From the first time fully balanced type anchors were applied on vessels in Korean shipyard, main design problem on this application was that the anchor doesn't normally slide into the pocket when the anchor fluke is not in line with pocket, as the anchor freely rotates by the swivel on forerunner. In order to prevent the problem, swivel has been deleted on the forerunner to prevent anchor rotation until now, but this solution caused problems such as twist lock of anchor chain, restriction of windlass direction, etc. On this paper, one of the solution is introduced to overcome the design problem by tilting the hawse pipe to some extent, which makes anchor turned at the time anchor ring touches the pocket skirt and that it properly slides into the pocket. Secondly, one of the solution is introduced to overcome misalignment problem between anchor chain cable and roller of chain compressor, which has been frequently occurred, by modification of roller design.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.125-130
• /
• 2016

In this paper, various heat dissipation designs for a rail anchoring failure detection module were investigated by a thermal flow analysis. For the detection module with the heat dissipation design on the overall housing surface, an average temperature inside the module was lowered by $25^{\circ}C$ when compared to no heat dissipation design. In addition, an internal heat-flow blocking layer and an heat conduction layer inserted between the LED module and housing case were effective in reducing the temperature in the rail anchoring failure detection, which has a limited space for installation and little air flow. Especially, the temperature near LED module decreased below $55^{\circ}C$ when the optimal heat dissipation design was applied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.506-509
• /
• 2003

The liquid crystal (LC) aligning capabilities by the washing processes after rubbing on the two kinds of the rubbed polyimide (PI) surface were studied. The polar anchoring energy of 4-n-pentyl-4'-cyanobiphenyl (5CB) increased with the rubbing strength RS on the two kinds of the rubbed PI surface. The polar anchoring energy of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Also, the surface ordering of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Therefore, the surface ordering of 5CB strongly depends on the polymers and washing process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.3023-3036
• /
• 2019

This study investigated the television (TV) content viewers' behavior influenced by online communication at the choice of new TV series on a terrestrial streaming platform. For exploring the impact of the anchoring effect on the TV content consumption, this study analyzed the correlation between the first episode's TV ratings and the data of online comments or reactions. These data were potential audiences' communication, which were generated on the online article three weeks before the first broadcasting began. To avoid the crucial influence by external factors, such as season and social issue, the test was done with eight (8) TV series which have same genre (drama), similar core audience targeting (20-49's women), similar broadcasting period (Jun-Oct 2016), same scheduling (10.00 to 11.00 pm, weekdays) and aired on terrestrial TV platforms. This research found that not only the amount of comments and reactions, but also the attitude about the comments created before broadcasting, positively influence the audiences' decision-making behavior for new TV content choices. This investigation contributes to the literature on media economics and management by exploring the media content users' consuming behavior with behavioral economics perspectives (anchoring effect) and making a first step for finding a new effect on the media content consumption.