• Geomechanics and Engineering
• /
• 제5권3호
• /
• pp.187-194
• /
• 2013

The most soil anchor works have been concerned with the uplift problem on embedded in non-reinforced soils under pullout test. Symmetrical anchor plates are a foundation system that can be resisting tensile load with the support of around soil in which symmetrical anchor plate is embedded. Engineers and authors proved that the uplift response can be improved by grouping the symmetrical anchor plates, increasing the unit weight, embedment ratio and the size of symmetrical anchor plates. Innovation of geosynthetics in the field of geotechnical engineering as reinforcement materials found to be possible solution in symmetrical anchor plate responses. Unfortunately the importance of reinforcement in submergence has received very little attention by researchers. In this paper, provision of tensile reinforcement under embedded conditions has been studied through uplift experiments on symmetrical anchor plates by few researchers. From the test results it has been showed that the provision of geogrid reinforcement system enhances the uplift response substantially under uplift test although other results are such as increase the ultimate uplift response of symmetrical anchor plate embedded using geosynthetic and Grid Fixed Reinforced (GFR) and symmetrical anchor plate improvement is very dependent on geosynthetic layer length and increases significantly until the amount of beyond that further increase in the layer length does not show a significant contribution in the anchor response.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.165-181
• /
• 2014

In the past decade, different types of underreamed ground anchors have been developed for substructures requiring uplift resistance. This article introduces a new type of umbrella-shaped anchor. The uplift behavior of this ground anchor in clay is studied through a series of laboratory and field uplift tests. The test results show that the umbrella-shaped anchor has higher uplift capacity than conventional anchors. The failure mode of the umbrella-shaped anchor in a large embedment depth can be characterized by an arc failure surface and the dimension of the plastic zone depends on the anchor diameter. The anchor diameter and embedment depth have significant influence on the uplift behavior. A finite element model is established to simulate the pullout of the ground anchor. A parametric study using this model is conducted to study the effects of the elastic modulus, cohesion, and friction angle of soils on the load-displacement relationship of the ground anchor. It is found that the larger the elastic modulus and the shear strength parameters, the higher the uplift capacity of the ground anchor. It is suggested that in engineering design, the soil with stiffer modulus and higher shear strength should be selected as the bearing stratum of this type of anchor.

• 수산해양기술연구
• /
• 제58권1호
• /
• pp.10-18
• /
• 2022

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.621-628
• /
• 2002

Compaction Grouting Pack (CGP) Anchor which is composite anchor of bearing plus friction-type was chosen and executed for the open-cuts in soft ground. This paper presents an analysis of data from tests on composite-anchor by jacking force. The properties of composite-anchor was presented to be as follows , the maximum plastic displacement was 60 mm in abandoned coal fill deposit, the shear stress($\tau$) is expressed as $\tau$ = (equation omitted) kg/$\textrm{cm}^2$ in clayey silt.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1502-1508
• /
• 2011

Ground anchor expands the hollow wall of settled part and has the structure which resists the designed tensile load by the bearing pressure generated by the wedge of the anchor body pressing in the expanded part. Such ground anchor has been recognized for stability and economicality since 1960s in technologically advanced nations such as Japan and Europe, and in 1970s, the Japan Society of Soil Engineering has established and announced the anchor concept map. The ground anchor introduced in Korea, however, has the structural problem where the tensile strength is comes only from the ground frictional force due to expansion of the wedge body. In an interval where the ground strength is locally reduced due to fault, discontinuation or such, this is pointed out as a critical weakness where the anchor body of around 1.0m must resist the tensile load. Also, in the installation of concrete block, the concentrated stress of concrete block constructed on the uneven rock surface causes damage, and many such issues in the anchor head have been reported. Thus, in this study, by using the expanded bit for precise expansion of settled part, the ground anchor system was completed so that the bearing pressure of ground anchor can be expressed as much as possible, and the bearing plate was inserted into the ground to resolve the existing issues of concrete block. Through numerical analysis and pullout test executed for verification of site applicability, the pullout-behavior characteristics of anchor was analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1008-1013
• /
• 2006

Ground anchor method is widely used in the large scale deep excavation of urban area to support a retained wall. Excavation using the ground anchor as a supporting system near a building have many difficulties due to the limitation of construction space. This method can not be applied to the site with the insufficient space from the retained wall to the boundary line. In this case, soil improvement at the anchor bond zone can be used to secure the frictional resistance of ground anchor within the boundary. Through this method, the bond length of anchor can be shortened considerably. This paper deals with the case study on the ground excavation adjacent to a building. The object field is Yongsan Park Tower Construction Site. In this site, the enlarged anchor with soil improvement was applied to solve the problem due to the limitation of construction space. According to the results of field test and monitoring, the anchor with soil improvement is very effective to secure the frictional resistance at the anchor bond zone.

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.341-359
• /
• 2019

Non-monolithic concrete structural connections are commonly used both in new constructions and retrofitted structures where anchors are used for connections. Often, flaws are present in anchor system due to poor workmanship and deterioration; and methods available to check the quality of the composite system afterward are very limited. In case of presence of flaw, load transfer mechanism inside the anchor system is severely disturbed, and the load carrying capacity drops drastically. This raises the question of safety of the entire structural system. The present study proposes a wave propagation technique to assess the integrity of the anchor system. A chemical anchor (embedded in concrete) composite system comprising of three materials viz., steel (anchor), polymer (adhesive) and concrete (base) is considered for carrying out the wave propagation studies. Piezoelectric transducers (PZTs) affixed to the anchor head is used for actuation and the PZTs affixed to the surrounding concrete surface of the concrete-anchor system are used for sensing the propagated wave through the anchor interface to concrete. Experimentally validated finite element model is used to investigate three types of composite chemical anchor systems. Studies on the influence of geometry, material properties of the medium and their distribution, and the flaw types on the wave signals are carried out. Temporal energy of through time domain differentiation is found as a promising technique for identifying the flaws in the multi-layered composite system. The present study shows a unique procedure for monitoring of inaccessible but crucial locations of structures by using wave signals without baseline information.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.139-151
• /
• 1998

SI 앵커는 지반개량 앵커를 의미한다. 이는 앵커를 지지하는 지반을 JSP로 개량한 것으로, SI 앵커체는 80cm 정도의 직경을 가지게 된다. SI 앵커는 앵커체와 지반사이의 마찰저항력과 앵커체 앞면의 지압저항력으로 인해 높은 인발저항력을 발휘하게 되는데, 특히 마찰저항력은 JSP로 개량된 앵커체의 직경의 증대로 인해 상당히 증가하게 된다. 본 연구에서는 SI 앵커의 인발저항기구를 분석하기 위해 실내 모형실험과 현장실험을 실시하였다. 공기건조 모래지반 내에서의 실내 모형실험을 통해 SI 앵커 주변지반의 변형률장을 분석하였는데, 이는 토조 벽면에 설치된 라텍스 멤브레인을 이용한 사진 분석법을 통해 이루어 졌다. 10매의 변형률게이지가 부착된 특수 설계된 PVC 파이프를 앵커체 내에 설치하고 변형률을 측정하여 현장실험의 결과를 분석하였는데, 역시 실내 모형실험과 같이 앵커체 내에서의 변형률을 측정하였다.

• 건축구조
• /
• 제13권3호
• /
• pp.27-30
• /
• 2006

• 한국지반환경공학회 논문집
• /
• 제13권1호
• /
• pp.53-61
• /
• 2012

본 연구에서는 복합형 지지방식으로 개발된 MC앵커에 대한 연구를 수행하였다. MC앵커는 선단 정착장치가 확장되어 천공된 공벽에 지압력이 발휘됨에 따라 인발력 증대와 그라우팅이 제대로 이루어지지 않을 경우에도 앵커체가 지반에서 탈락하지 않는 특성이 있다. 또한, 앵커강선과 더불어 보강철근을 삽입하여 인장손실을 감소시키는 동시에 시공성을 높이고 앵커강선의 손실이 발생하였을 때 네일의 역할을 기대할 수 있어 장기적인 안정성 향상을 꾀할 수 있다. 그러나, MC앵커와 같은 복합형 앵커는 마찰형 앵커와 지지구조가 다르기 때문에 지반과 그라우트의 마찰력에 의한 인발력 산정방식은 적합하지 않다. 특히, 국내의 경우에는 복합형 앵커에 대하여 지반특성을 고려한 설계법이 명확하게 정립되어 있지 않아 복합형 앵커의 인발력이 과소 또는 과대 평가되는 문제점이 있다. 따라서, 본 연구에서는 복합형 앵커의 일종인 MC앵커의 특성을 평가하기 위하여 강도변화가 심한 셰일지반을 대상으로 총 9개소에서 시험앵커를 시공하여 인발, 인장 및 장기변위를 측정하였다. 또한, 시험결과를 일반 마찰형 앵커의 경우와 비교, 분석하여 MC앵커의 거동 특성을 평가하였으며, 시험결과 셰일층에서 MC앵커는 일반 마찰형 앵커에 비해 인발력 증대효과를 확인할 수 있었다.