• 제목/요약/키워드: anatomical position

검색결과 203건 처리시간 0.028초

$5_{th}$ Percentile 성인 여성 유한요소 모델을 이용한 OOP(Out-of-Position) 문제에 대한 수치해석 (Numerical Simulation of OOP(Out-of-Position) Problem with$5_{th}$ Percentile Female F.E Model)

  • 나상진;최형연;이진희
    • 한국자동차공학회논문집
    • /
    • 제12권3호
    • /
    • pp.177-183
    • /
    • 2004
  • The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

전완(前腕)의 국부(局部) 진동(振動)이 작업자의 굴근(屈筋) 및 신근(伸筋) 피로(疲勞)에 미치는 영향 (The Effects of Hand-Arm Vibration on Flexor and Extensor Fatigue)

  • 이동춘;김길주
    • 대한인간공학회지
    • /
    • 제18권1호
    • /
    • pp.55-69
    • /
    • 1999
  • It is very common to use the powered hand tools to enhance the productivity in various types of industry. But the use of the powered hand tools could cause health problems such as cumulative trauma disorders and vibration white fingers. In this study. the effects of hand-arm vibration and anatomical hand position on localized muscle fatigue were analyzed. Eight healthy male subjects volunteered for the study. Vibration frequencies of 0, 40, 80, 100, 150, and 200Hz and hand position of flexion and ulnar deviation were selected for the independent variables of the experiment. Median frequency shifting was used as a dependent variable. The results indicated that at the vibration frequency of 40Hz and accelation of 2g, the muscle fatigue was the greatest. For the hand position. there was significant difference between neutral and flexion. and neutral and ulnar deviation, but no difference between flexion and ulnar deviation. These results could be applied in designing powered hand tools to minimize the health problems.

  • PDF

Another Glenoid Measurements for Shoulder Surgery

  • Jeong, Yeon-Seok;Yum, Jae-Kwang;Lee, Jun-Seok
    • Clinics in Shoulder and Elbow
    • /
    • 제21권4호
    • /
    • pp.179-185
    • /
    • 2018
  • Background: We analyzed the angle between the glenoid anterior surface and glenoid axis, the range of the glenoid apex and the location of the glenoid apex for assistance during shoulder surgery. Methods: Sixty-two patients underwent a computed tomography of the shoulder with a proximal humerus fracture. In the range of the glenoid apex, the ratios of the distribution of triangles with a Constant anterior and posterior area of the glenoid were measured. The location of glenoid apex was confirmed as the percentage of the position with respect to the upper part of the glenoid with the center of the part, analyzed the angle between the glenoid anterior surface and glenoid axis was measured. Results: The angle between the glenoid anterior surface and glenoid axis was $19.80^{\circ}{\pm}3.88^{\circ}$. The location of the glenoid apex is $60.36%{\pm}9.31%$, with the upper end of the glenoid as the reference. The range of the glenoid apex was $21.16%{\pm}4.98%$. When the height of the glenoid becomes smaller, the range of the glenoid apex tends to become larger (p=0.001) and the range of the glenoid apex becomes wider (p=0.001) as the glenoid width narrows. Conclusions: We believe the anatomical measurements of the glenoid will be helpful for a more accurate insertion in glenoid component. It is thought that more accurate insertion is possible if we can set other anatomical measurements using computed tomography imaging of the glenoid which can develop into the study of other anatomical measurements.

정상 성인 여성의 발목관절에서 근력 균형과 관절위치감각의 상관관계 (The Relationship between Strength Balance and Joint Position Sense Related to Ankle Joint in Healthy Women)

  • 고유민;정미숙;박지원
    • The Journal of Korean Physical Therapy
    • /
    • 제23권2호
    • /
    • pp.23-29
    • /
    • 2011
  • Purpose: The purpose of this study was to determine whether there is a relationship between strength balance and joint position sense related to the ankle joint in healthy women. Methods: Twenty-six healthy women were recruited. Isokinetic strength and joint position sense (JPS) were measured using a Biodex System 4 pro Dynamometer and a Biodex Advantage Software Package. Prior to measuring the JPS and isokinetic strength, the dominant foot was determined according to the Waterloo Footedness Questionnaire. After the JPS test, isokinetic strength was evaluated in velocity $60^{\circ}s$, including practice trial ($90^{\circ}s$). Using the measured isokinetic strength, a Strength Balance Index (SBI) was calculated. Results: Relative to the SBI, the degree of imbalance was varied; but there were imbalances. For each starting position, JPS error showed no significant differences (p>0.05). The relationship between SBI and JPS was found during the inversion to eversion process, eversion to inversion, and dorsi flexion to plantar flexion. Conclusion: There are moderate to mild relationships between JPS and SBI during ankle movement. It is suggested that to prevent ankle injuries, strength balance should be considered along with the other potential factors including anatomical alignment, proprioception, and soft tissues problems.

The Effects of Trunk and Lower Extremity Muscle Activation on Straight Leg Rising by Various Ankle Joint Rotation Angle

  • Lee, Sang-Yeol;Kim, Mi-Jin;An, Bo-Gyeong;Hwang, Na-Yeon;Kim, Sung-Jin;Han, Min-Hyoung
    • 대한물리의학회지
    • /
    • 제9권3호
    • /
    • pp.249-253
    • /
    • 2014
  • PURPOSE: This study intends to examine the effects of change of anatomical position of the ankle joint in open kinematic chain, an appropriate position for selective muscle training, on vastus lateralis obliques, rectus femoris, vastus medilais obliques, and rectus abdominalis muscle activation and to present an effective method of muscle training for patients and normal people. METHODS: The participants of this study were Korean healthy adult in their 20s. The 8 channel surface electromyography was used to measure muscle activation while the subjects raised their legs under each condition. Under each condition, while the subjects raised the leg to hip joint flexion at $60^{\circ}$ along the arch. RESULTS: The analysis result of muscle activation by each section and position during leg rising. There were significant differences. CONCLUSION: For independent strengthening of each muscle, muscle activation was measured according to leg raising angles and the result differed according to each section and position. If this study result is applied to muscle training for patients who need selective muscle training, more effective muscle strengthening will be made possible.

손의 기능 해부에 대한 연구 (A Study of the Functional Anatomy of the Hand)

  • 박영한;이효정
    • 대한물리치료과학회지
    • /
    • 제13권1호
    • /
    • pp.61-74
    • /
    • 2006
  • This study about functional anatomy of the hand. hand injuries are among the most common problems confronting patient, physical therapist and physicians. physical therapist should know about normal hand function and anatomical structure for hand injury, clinical reasoning and intervention. physical therapist should know about the Skeletal of the hand, Function of The Hand, Nerves of the hand, Sensation of the Hand, Intrinsic muscle, Power and Balance and Functional Position of the Hand. In this article, we discuss the physiologic properties of hand structure, biomechanical observation in hand function, sensation and nerves, hand positioning.

  • PDF

Robot-assisted Long Bone Fractures Realignment

  • Xu, W.L.;Mukherjee, S.
    • 한국정보기술응용학회:학술대회논문집
    • /
    • 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
    • /
    • pp.91-97
    • /
    • 2005
  • Bones are dynamic structures, being supported by muscles, tendons, and ligaments. When some or all the structures are disturbed i.e. in fractures, the alignment of the bone in respect to the rest of the body is deranged. This gives rise to axial as well as rotational deformity in three dimensional planes. The correct alignment and position of the long bones are to be maintained to heal the bone in the best possible anatomical and functional position. The objective of this research is to address the problems in the current practice involving surgeon, assistant, fluoroscopy and crude mechanical means and to see if a robotic solution exists to solve the problems of manipulating and reducing long bone fractures. This paper presents various design aspects of the proposed surgeon-instructed, image-guided and robotic system including the system design specification, robot design and analysis, motion control and implementation, and x-ray image processing and incorporation in CAD environment.

  • PDF

기도에 대한 EBCT 영상에서의 내벽 윤곽선 자동검출 (The Automatic Detection of Inner Boundary on EBCT Images for Airway)

  • 김명남;조진호
    • 한국멀티미디어학회논문지
    • /
    • 제6권6호
    • /
    • pp.991-999
    • /
    • 2003
  • 본 논문에서는 호흡에 의하여 변화하는 기도 내부 영역의 형태학적인 정보를 반영할 수 있는 EBCT를 이용한 영상 획득 기법과 이 기법을 이용하여 획득한 단층 영상으로부터 기도 내벽의 윤곽선을 자동적으로 검출하는 방법을 제안하였다. 기도의 각 준위에 대한 영상데이터들을 적용한 컴퓨터 시뮬레이션 결과들을 통하여 제안한 방법이 효과적으로 기도의 윤곽선을 검출함을 확인하였으며 시간적 변화에 따른 기도 내벽의 단면적인 변화를 볼 수 있었다. 따라서, 제안한 방법이 임상에서의 정량적 평가에 활용할 수 있을 것으로 판단된다.

  • PDF

파노라마방사선사진에서 구획별 교합면 기준선에 대한 치아근원심경사 (Mesiodistal tooth angulation to segmental occlusal plane in panoramic radiography)

  • 김재덕;김진수;유충현
    • Imaging Science in Dentistry
    • /
    • 제35권1호
    • /
    • pp.25-31
    • /
    • 2005
  • Purpose : To evaluate the stability of the segmental occlusal plane and anatomical line as the reference line for measuring the mesiodistal tooth angulation in panoramic radiography and to determine the mean angle and the range of the mesiodistal tooth angulation in Korean population with normal occlusions. Materials and Methods : Twenty nine subjects (15 men, 14 women) with normal occlusion were selected. A total of 29 panoramic radiograms were taken at normal head position and then 10 images of 5 subjects selected were repeatedly taken with repositioning 2 times at each of the head down (V-shaped occlusion) and up (horizontal occlusion) for evaluation of stability of adopted reference lines by using PM2002CC (Planmeca, Finland). The images were traced with adoption of two test reference lines and the long axes of the teeth. The mesial angles formed by each reference line and the long axes of the teeth were measured and analyzed. Results : With anatomical reference line, the mesiodistal tooth angulations of the molars showed the significant difference by over 5 degree between the normal and each changed head position. With segmented occlusal reference line, deviations of mesiodistal tooth angulations by the two changed head positions were less than 1 degree. The means, standard deviations, and maximum and minimum values of mesiodistal tooth angulations to segmental occlusal reference line on panoramic radiography were determined. Conclusion : It would appear that mesiodistal tooth angulations to segmental occlusal plane as reference line in panograms are predictable as standards of normal occlusion and useful for evaluation of tooth arrangement between adjacent teeth.

  • PDF

IGRT를 위한 비침습적인 호흡에 의한 장기 움직임 실시간 추적시스템 (A Non-invasive Real-time Respiratory Organ Motion Tracking System for Image Guided Radio-Therapy)

  • 김윤종;윤의중
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권5호
    • /
    • pp.676-683
    • /
    • 2007
  • A non-invasive respiratory gated radiotherapy system like those based on external anatomic motion gives better comfortableness to patients than invasive system on treatment. However, higher correlation between the external and internal anatomic motion is required to increase the effectiveness of non-invasive respiratory gated radiotherapy. Both of invasive and non-invasive methods need to track the internal anatomy with the higher precision and rapid response. Especially, the non-invasive method has more difficulty to track the target position successively because of using only image processing. So we developed the system to track the motion for a non-invasive respiratory gated system to accurately find the dynamic position of internal structures such as the diaphragm and tumor. The respiratory organ motion tracking apparatus consists of an image capture board, a fluoroscopy system and a processing computer. After the image board grabs the motion of internal anatomy through the fluoroscopy system, the computer acquires the organ motion tracking data by image processing without any additional physical markers. The patients breathe freely without any forced breath control and coaching, when this experiment was performed. The developed pattern-recognition software could extract the target motion signal in real-time from the acquired fluoroscopic images. The range of mean deviations between the real and acquired target positions was measured for some sample structures in an anatomical model phantom. The mean and max deviation between the real and acquired positions were less than 1mm and 2mm respectively with the standardized movement using a moving stage and an anatomical model phantom. Under the real human body, the mean and maximum distance of the peak to trough was measured 23.5mm and 55.1mm respectively for 13 patients' diaphragm motion. The acquired respiration profile showed that human expiration period was longer than the inspiration period. The above results could be applied to respiratory-gated radiotherapy.