• 제목/요약/키워드: anatomical and physical characteristics

검색결과 45건 처리시간 0.023초

Reference dosimetry for inter-laboratory comparison on retrospective dosimetry techniques in realistic field irradiation experiment using 192Ir

  • Choi, Yoomi;Kim, Hyoungtaek;Kim, Min Chae;Yu, Hyungjoon;Lee, Hyunseok;Lee, Jeong Tae;Lee, Hanjin;Kim, Young-su;Kim, Han Sung;Lee, Jungil
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2599-2605
    • /
    • 2022
  • The Korea Retrospective Dosimetry network (KREDOS) performed an inter-laboratory comparison to confirm the harmonization and reliability of the results of retrospective dosimetry using mobile phone. The mobile phones were exposed to 192Ir while attached to the human phantoms in the field experiment, and the exposure doses read by each laboratory were compared. This paper describes the reference dosimetry performed to present the reference values for inter-comparison and to obtain additional information about the dose distribution. Reference dosimetry included both measurement using LiF:Mg,Cu,Si and calculation via MCNP simulation to allow a comparison of doses obtained with the two different methodologies. When irradiating the phones, LiF elements were attached to the phones and phantoms and irradiated at the same time. The comparison results for the front of the phantoms were in good agreement, with an average relative difference of about 10%, while an average of about 16% relative difference occurred for the back and side of the phantom. The differences were attributed to the different characteristics of the physical and simulated phantoms, such as anatomical structure and constituent materials. Nevertheless, there was about 4% of under-estimation compared to measurements in the overall linear fitting, indicating the calculations were well matched to the measurements.

국산목재의 고급가구 및 목공예 용재 개발을 위한 기초연구 - 국내산 밤나무 7품종의 해부 및 물리적 특성- (Fundamental Study of Domestic Wood for the Materials for High-class Furnitures and Woodcrafts -Anatomical & Physical Characteristics of Chestnut Woods Grown in Korea-)

  • 이선화;권성민;박병호;이성재;이욱;김만조;김남훈
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.23-32
    • /
    • 2008
  • 국내산 목재의 신용도개발을 위한 기초연구로서, 국내에서 생장한 밤나무 7품종(단택, 이취, 이평, 만성, 은기, 유마, 축파)의 목재의 해부 및 물리적 특성을 조사하였다. 밤나무재의 관공은 환공성 문양공재 형태였고 주로 고립관공이 관찰되었다. 방사유세포는 평복, 직립, 방형이 모두 존재하였으나 주로 평복세포였다. 방사조직은 단열, 복열, 다열의 형태가 모두 관찰되었으나 수심부에서는 거의 단열방사조직이었고 수피부에서는 복열이나 다열방사조직의 출현빈도가 높았다. 수심부는 수피부보다 도관직경이 작았고, 단위면적 당 도관의 분포수가 많았으며 방사조직의 수가 적고 방사조직의 세포고가 높았다. 복열 및 다열방사조직의 출현비율은 단택, 이취, 만성, 축파에서 높은 반면, 유마, 은기, 이평에서 낮았다. 연륜폭은 수심부가 수피부에 비해 비교적 더 넓었고, 수심부 연륜폭은 만성과 유마가, 수피부 연륜폭은 이취가 넓었다. 만재율은 수심부와 수피부 간에 큰 차이가 없었으나 대체적으로 수피부가 다소 높았고, 품종 중에서는 만성과 축파가 높았다. 생재함수율은 모든 품종에서 심재부가 변재부보다 다소 높게 나타났다. 밀도는 심재부와 변재부, 품종에 따른 큰 차이는 없었으나 대체적으로 심재가 변재보다 높게 나타났으며 특히 이평과 이취의 밀도가 컸다.

가열(加熱)·촉매중합법(觸媒重合法)에 의한 목재(木材)·고분자복합체(高分子複合體) 제조(製造)(I) - MMA에 의한 한국산(韓國産) 주요목재(主要木材)의 복합체특성(複合體特性) (On the manufacturing of WPC (Wood Plastic Composites) with Heat-Catalyst Polymerization (I) - On the characteristics of composites made from monomer Methyl MethacryIate and several commercial woods in Korea)

  • 조남석;조재명;안원영
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권3호
    • /
    • pp.3-16
    • /
    • 1974
  • One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

  • PDF

1개 종합병원 환자의 낙상에 관한 조사 (A Study on Fall Accident)

  • 이현숙;김매자
    • 대한간호
    • /
    • 제36권5호
    • /
    • pp.45-62
    • /
    • 1998
  • The study was conducted from November 1995 to May 1996 at the one general hospital in Seoul. The total subjects of this study were 412 patients who have the experience of fall accident, among them 31 was who have fallen during hospitalization and 381 was who visited emergency room and out patient clinic. The purposes of this study were to determine the characteristics, risk factors and results of fall accident and to suggest the nursing strategies for prevention of fall. Data were collected by reviewing the medical records and interviewing with the fallers and their family members. For data analysis, spss/pc+ program was utilized for descriptive statistics, adjusted standardized $X^2$-test. The results of this study were as follows: 1) Total subjects were 412 fallers, of which 245(59.5%) were men and 167(40.5%) were women. Age were 0-14 years 79(19.2%), 15-44 years 125(30.4%), 45-64 years 104(25.2%), over 65 years 104(25.2%). 2) There was significant association between age and the sexes ($X^2$=39.17, P=0.00). 3) There was significant association between age and history of falls ($X^2$=44.41. P= .00). And history of falls in the elderly was significantly associated with falls. 4) There was significant association with age and medical diagnosis ($X^2$=140.66, P= .00), chief medical diagnosis were hypertension(34), diabetis mellitus(22), arthritis(11), stroke(8), fracture(7), pulmonary tuberculosis(6), dementia(5) and cataract(5), 5) There was significant association between age and intrinsic factors: cognitive impairment, mobility impairment, insomnia, emotional problems, urinary difficulty, visual impairments, hearing impairments, use of drugs (sedatives , antihypertensive drugs, diuretics, antidepressants) (P < 0.05). But there was no significant association between age and dizziness ($X^2$=2.87, P=.41). 6) 15.3% of total fallers were drunken state when they were fallen. 7) Environmental factors of fall accident were unusual posture (50.9%), slips(35.2%), trips (9.5%) and collision(4.4%). 8) Most of falls occurred during the day time, peak frequencies of falls occurred from 1pm to 6pm and 7am to 12am. 9) The places of fall accident were roads(22.6%), house-stairs 06.7%), rooms, floors, kitchen (11.2%), the roof-top, veranda, windows(10.9%), hospital(7.5%), ice or snowy ways(5.8%), bathroom(4.9%), playground, park(4.9%), subway-stairs(4.4%) and public-bathrooms (2.2%). 10) Activities at the time of fall accident were walking(37.6%), turning around or reaching for something(20.9%), going up or down stairs09.2%), exereise, working07.4%), up or down from a bed(2.7%), using wheelchair or walking aids, standing up or down from a chair(2.2%) and standing still(2.2%). 11) Anatomical locations of injuries by falls were head, face, neck(31.3%), lower extremities (29.9%). upper extremities(20.6%), spine, thorax, abdomen or pelvic contents(l1.4%) and unspecified(2.9%). 12) Types of injures were fracture(47.6%), bruises03.8%), laceration (13.3%), sprains(9.0%), headache(6.6%), abrasions(2.9%), intracranial hemorrage(2.4%) and burns(0.5%). 13) 41.5% of the fallers were hospitalized and average of hospitalization was 22.3 days. 14) The six fallers(1.46%) died from fall injuries. The two fallers died from intracranial hemorrage and the four fallers died of secondary infection; pneumonia(2), sepsis(1) and cell lulitis(1). It is suggested that 1) Further study is needed with larger sample size to identify the fall risk factors. 2) After the fall accident, comprehensive nursing care and regular physical exercise should be emphasized for the elderly person. 3) Safety education and safety facilities of the public place and home is necessary for fall prevention.

  • PDF

한국산(韓國産) 유용목재(有用木材)의 기초재질(基礎材質)에 관(關)한 연구(硏究) (Studies of the Properties of Commercial Woods Grown in the Southern Part of Korea)

  • 정병재;이정석;김윤수
    • Journal of the Korean Wood Science and Technology
    • /
    • 제6권2호
    • /
    • pp.3-19
    • /
    • 1978
  • 우리나라에서 아직 이용개발(利用開發)되고 있지 아니한 구상나무, 구실잣밤나무, 후박나무, 때죽나무 및 북가시나무등(等) 5수종(樹種)에 대(對)한 해부학적성질(解剖學的性質), 물리적성질(物理的性質), 기계적성질(機械的性質), 접착성능(接着性能), 목리(木理) 무늬정미성(精緻性), 가공성(加工性), 건조특성(乾燥特性), 프로링제작성(製作性), 목재(木材)의 조성분(組成分), 펄프화특성(化特性) 및 박피성등(剝皮性等)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 원료목재(原料木材)의 형질(形質)은 구상나무가 통직(通直)하나 옹이가 과다(過多)하였고, 잣밤나무와 때쭉나무는 굽음이 심(甚)하였다. 2. 섬유장(纖維長)은 구상나무가 2.97mm로 가장 컷으며, 때죽나무가 1.49mm였으며, 기타(其他) 수종(樹種)도 1.07~1.19mm에 속하였다. 섬유폭(纖維幅)은 구상나무가 39.3${\mu}$으로 가장 컸고, 때죽나무가 18.4${\mu}$으로 최소(最小)였으며 기타(其他) 수종(樹種)들은 23~29${\mu}$의 범위(範圍)에 속하나 대체(大體)로 타활엽수(他闊葉樹)에 비(比)해 섬유폭(纖維幅)이 컸다. 3. 북가시나무의 전건비중(全乾比重)은 0.74${\pm}$0.03으로서 한국산(韓國産) 참나무류(類)의 비중(比重)과 유사(類似)하였으며 구상나무는 0.34${\pm}$0.02로 최소(最小)였으며 기타(其他) 수종(樹種)은 0.47~0.51의 범위(範圍)에 있었다. 4. 흡수량(吸水量)은 대체(大體)로 비중(比重)에 역비례(逆比例)하여 감소(減少)되나 흡습량(吸濕量)은 비중(比重) 증가(增加)에 따라서 증가(增加)하는 경향(傾向)을 나타냈다. 또한 횡단면(橫斷面)의 흡수량(吸水量)은 경단면(經斷面) 접선단면(接線斷面)의 그것들에 비(比)해 2배(倍) 이상(以上)에 달(達)하나, 후박나무는 1.7배(倍)였으며, 경단면(經斷面)과 접선단면(接線斷面)의 흡수량(吸水量)은 수종(樹種)에 따라서 달랐다. 5. 전건수축율(全乾收縮率)은 접선방향(接線方向)에서 5.36~10.24%, 반경방향(半徑方向)에서 2.83~6.13%에 범위(範圍)에 속하며 구상나무가 가장 적고, 북가시나무가 가장 컸다. 수축율(收縮率)은 비중(比重)이 큰 수종(樹種)일수록 컸다. 6. 공시수종(供試樹種)의 제강도(諸强度)는 북가시나무의 경우 강원도산(江原道産) 신갈나무와 유사(類似)하였으며, 구실잣밤나무, 후박나무 구상나무는 비중(比重)이 유사(類似)한 한국산수종(韓國産樹種)의 재질(材質)들과 유사(類似)하였으나, 때쭉나무는 일반적(一般的)으로 비중(比重)에 비(比)해 높은 강도치(强度値)를 기록(記錄)하였다. 7. 요소수지(尿素樹脂) 및 석탄산수지(石炭酸樹脂)에 대(對)한 접착(接着)은 후박나무와 구실잣밤나무가 최대치(最大値)를 기록(記錄)하였으나, 비중(比重)이 큰 북가시나무와 비중(比重)이 작은 구상나무는 그렇지 못하였다. 8. 목리(木理)와 무늬정치성(精緻性)은 후박나무는 파상(波狀)으로 굴곡(屈曲)되어 목재공예적(木材工藝的)으로 진용(珍用)될 수 있으며 기타(其他) 수종(樹種)들은 건축(建築) 및 가구용재(家具用材)로서 적합(適合)한 무늬였다. 6. 가공성(加工性)은 북가시나무를 제외(除外)하곤 기타 수종(樹種)은 양호(良好)할 것으로 판단(判斷)된다. 10. 비중(比重)이 큰 수종(樹種)일수록 건조(乾燥)의 곤란성(困難性)을 노정(露呈)하였으나, 후박나무는 비중(比重)에 비(比)해 건조(乾燥)가 용이(容易)치 않고, 심(甚)한 트위스팅 및 커핑 등(等) 건조결함(乾燥缺陷)을 발생(發生)하였다. 11. 구상나무를 제외(除外)한 모든 공시수종(供試樹種)은 플로링제작(製作)에 적합(適合)한 것으로 판단(判斷)된다. 12. 화학적(化學的) 조성분(組成分)은 5수종(樹種) 공(共)히 펜토산 함량(含量)이 많았고 북가시나무는 추출물(抽出物)의 함량(含量)이 최대(最大)였다. 13. 크라프트 펄프화(化)는 5수종(樹種) 공(共)히 경제수율(經濟收率)인 45% 이상(以上)을 기록(記錄)하였다. 14. 박피(剝皮)는 구상나무와 후박나무가 용이(容易)하였으며, 5수종(樹種) 모두 자비(煮沸)한 후(後) 박피(剝皮)한 것이 가장 능율적(能率的)이었다.

  • PDF