• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.72-78
• /
• 1984

The notion that the axis of the shaft of the articulator must coincide the patient's mandibular transverse axis tells us the importance of locating the axis precisely. When using kinematic axis to transfer a cast to an articulator, the anatomic asymmetry of the contralateral points will result in certain distortion when the axis transferred to an articulator where the mechanical axis produces symmetry. In this study, after locating the true hinge axis point with Denar hinge axis locator, the discrepancies between true hinge axis point and arbitrary hinge axis point that was 13mm anterior from the posterior margin of center of trangus to the outer canthus of eye were measured. And the discrepancies between left and right true hinge axis point in the superoinferior and anteroposterior directions were measured. For this study, 20 dental students who have no missing teeth and no difficulties of mandibular movement were selected. Upper and lower cast of subjects were mounted on Denar Mark II articulator uisng Denar Slidematic face-bow and centric relation record for the measurement of discrepancies between left and right true hinge axis points. The results obtained as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right: horizontal distance; 1.99mm, vertical distance; 2.12mm, linear distance; 3.36 mm. Left: horizontal distance; 1.39mm, vertical distance; 2.06mm, linear distance; 2.09mm. Total: horizontal distance; 1.69mm, vertical distance; 2.09mm linear distance; 3.06 mm. 2. The 87.5% of true hinge axis points were within 5mm of the arbitrary hinge axis point. 3. The mean discrepancies between the right and left hinge axis point were 2.92mm in superoinferior direction and 4.74mm in anteroposterior direction. 4. When transferring the axis to the articulator, anatomic asymmetry between right: and left axis point produces in dislocation of cast on the articulator, and undesirable shift in esthetic tooth position will be resulted.

• 치과방사선
• /
• 제19권1호
• /
• pp.25-29
• /
• 1989

The author has evaluated the panoramic image clarity of the midfacial anatomic structures in dry skull according to the skull position. The radiopaque markers were attached to the anatomic structures: infraorbial rim, upper and lower borders of zygomatic arch, pterygomaxillary fissure, lateral pterygoid plate, pyriform aperture of nasal cavity, lateral wall of maxilla, orbital floor, infraorbital foramen, and nasal floor. Position of the skull were divided into four groups. standard, 25mm forward, chin-down, chin-up position. The results were as follows: 1. The pyriform aperture of nasal cavity, lateral wall of the maxilla, orbital floor, infraorbital foramen and nasal floor did net cast any discernible image. 2. Nearly all images of midfacial structures were blurred in the chin-up position. 3. The forward position provided good visualization of the maxillary sinus. 4. The chin-down position provided good visualization of the zygomatic arch, pterygomaxillary fissue, and lateral pterygoid plate.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.105-111
• /
• 2005

It is essential to establish the suitable position for artificial maxillary anterior teeth, because of not only esthetics, phonetics, mastication, but also optimal position of artificial posterior teeth for the construction of functional and esthetic prostheses. Anatomic landmarks have been used in the arrangement of artificial teeth. Such as incisive papilla and palatal rugae are useful landmarks for positioning occlusal rim and upper anterior artificial teeth because they are relatively stable and to be identified on master cast. Therefore, if average distance between maxillary anterior teeth and landmarks in dentate subjects are measured and applied, appropriate position of occlusal rim can be initially established. In this study, to present a guide to the position of the occlusal rim for upper anterior teeth of edentulous patients, horizontal distance between anatomic landmarks were measured. Maxillary casts were made in 72 Korean dentate subjects. Horizontal distance between central incisor and incisive papilla, between incisive papilla and intercanine line, and between primary palatine rugae and gingival margin of canine were measured on each cast. The results of this study were as follows ; 1. The mean distance from the incisal edge of central incisor to the posterior border of incisive papilla was 12.1 mm (Male 12.2 mm, Female 11.9 mm). 2. The mean distance between posterior border of incisive papilla and intercanine line was 3.5 mm (Male 3.4 mm, Female 3.6 mm / Left 3.6 mm, Right 3.4 mm). 3. The mean distance from the palatal gingival margin of canine to the lateral border of primary palatine rugae was 2.4 mm (Male 2.4 mm, Female 2.4 mm / Left 2.4 mm, Right 2.3 mm). 4. On all measured items, there were no significant differencies in measured values between male and female, and between left and right sides. (P>0.05).

• 구강회복응용과학지
• /
• 제23권3호
• /
• pp.197-203
• /
• 2007

Statement of problem: It is very important to establish the suitable position for artificial maxillary anterior teeth and the orientation of occlusal plane in fabrication of the complete dentures. Incisive papilla has been considered the most useful anatomic landmark in the arranging of a maxillary anterior artificial teeth. Purpose: To determine correct position of upper anterior artificial teeth in complete denture patients, relationship of incisive papilla, intercanine line, occlusal plane were evaluated in Korean adults. Materials and Method: Maxillary casts were made in 60 Korean dentate subjects. Each cast was mounted in Hanau modular articulator using Hanau spring bow. Then, anatomic landmarks were determined in each cast. Distance from central incisor to incisive papilla, distance from incisive papilla to intercanine line and discrepancies between frankfurt plane and occlusal plane were measured and analysed. Results: 1. The mean distance between the posterior point of incisive papilla and the incisal edge of central incisor was 11.20 mm (in male 11.77 mm, in female 10.55 mm) and there was no significant difference in measured values between male and female 2. The mean distance between the posterior point of incisive papilla and intercanine line was 2.52 mm (Male 2.57 mm, Female 2.35 mm) and there were no significant differencies in measured values between male and female 3. The mean discripancy between the Frankfurt plane and the occlusal plane were 9. 75 degree (Male 9.81 degree, Female 9.55 degree), and there was no significant difference in measured values between left and right sides.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.225-233
• /
• 1994

The restorations of the severely damaged teeth by post core have been increased with the developement of endodontic procedures. But high failure rates of these procedures being reported, various restorative modifications were induced for successful treatments. Cast post-core and prefabricated post with core buildups are choice of treatment. The main causes of failure of the restorations are the fracture of post and core, root fracture, and recurrent caries due to microleakage. Recently, the acid etching technique and the use of dentin bonding agent at tooth surface to reduce the possible microleakage at the tooth-restoration interfaces were introduced. The object of this study was to measure and compare the microleakage by the types and cementation methods of post-core. For this study, forty extracted human anterior teeth were selected for specimen. After cleansing and routine endodontic procedures, anatomic crowns of each specimen were removed at the level of 2mm above the cementoenamel junction. Canals were preparated for post insertion and specimens were divided into four groups randomly. Post-cores were fabricated according to method for each group. Microleakage was measured by length of dye penetration at the tooth-restoration interfaces with measuring microscope at 50 magnification. Oneway ANOVA and t-test were performed for statistical analysis of resulting data. The following results were obtained from this study. 1. There wert significant statistical differences in degree of microleakage between each group (p<0.01). 2. Cast post-core cemented with ZPC (Group I) showed the most severe microleakage pattern$(1.5547{\pm}0.0872mm)$, and cast post-core cemented with adhesive resin cement after tooth surface treatment with dentin bonding agent (Group II) showed the least microleakage $(0.1497{\pm}0.0872mm)$. 3. Group IV revealed less dye penetrations than group III, but no statistical significance was seen between two groups.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.41-51
• /
• 2005

Statement of problem. Anatomic landmarks have been used in the orientation of occlusal plane and the determination of vertical dimension for edentulous patients. Such as labial vestibules of anterior region and hamular notches, retromolar pads of posterior region are very useful anatomic landmarks for fabrication of occlusion rim because they are to be identified on master casts. Therefore, if average distances between landmarks of maxillae and mandible in dentate subjects are measured and applied, not only occlusal plane but also vertical dimension can be established initially. Purpose. The purpose of this study is to measure vertical distances between anatomic landmarks and to present a guide to the orientation of occlusal plane and the determination of vertical dimension of edentulous patients. Material and method. Upper and lower border-molded casts were made in 93 Korean dentulous subjects, mean age 25 years. Incisal edges of central incisors, bottoms of labial vestibules, hamular notches and the half level of retromolar pads were marked on casts. Measurements of vertical distances from incisal edge of central incisor to the bottom of labial vestibule, between upper and lower bottoms of labial vestibules, from hamular notch to retromolar pad and from hamular notch to the occlusal plane established by the incisal edge of maxillary central incisor and mesiopalatal cusps of both maxillary first molars were made on each cast. Results and conclusion. 1. The mean distance from the incisal edge of central incisor to the bottom of labial vestibule was 20.8mm(SD 1.7) on upper casts and 17.3mm(SD 1.4) on lower casts. 2. The mean distance between both bottoms of labial vestibules of upper and lower casts was 35.0mm(SD 2.7). 3 The mean distance from hamular notch to the half level of retromolar pad was 5.0mm(SD 1.3). 4. The mean distance from hamular notch to occlusal plane was 7.9mm(SD 1.5). 5. Distances from incisal edge of central incisor to labial vestibule on lower casts(P<0.01) and from hamular notch to retromolar pad(P<0.0001) were greater in male than in female.

• 구강회복응용과학지
• /
• 제27권1호
• /
• pp.15-23
• /
• 2011

본 연구는 앞서 발표된 '교합이 악구강계 및 전신에 미치는 영향 (I), (II), (III)'에 이어지는 네 번째 논문으로 교합과 악구강계 및 전신 증상과의 관계를 다루고 있는 다섯 가지 주요 이론 중 Myodontics theory 에 관한 내용이다. 이번 논문에서는 Myodontics theory에 대한 기본 개념과 치료방법 및 그 한계에 대하여 정리하였다.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.346-351
• /
• 2014

흡착 의치는 의치상연 주위 전체를 가동 점막으로 봉쇄하여 연하나 교합 시 의치상 내면에 일시적으로 음압을 형성하여 의치의 유지와 안정을 강화한다. 본 증례의 환자는 81세의 남자 환자로 새로운 의치를 제작하고 싶다는 주소로 내원하였다. 의치의 유지와 저작 효율에 대한 환자의 높은 요구도를 고려하여 흡착 의치를 통한 총의치 제작을 계획하였다. 하악 후구치 융기 부위를 가압하지 않은 채로 예비 인상을 채득 후 상하악 진단모형을 제작하였다. 이후 개인 트레이 제작 후 최종 인상 채득과 동시에 고딕 아치 기록을 시행하여 중심위 및 수직 고경을 채득하였으며, 상악에는 해부학적 치아, 하악에는 비해부학적 치아를 배열하여 설측 교합을 형성하였다. 이상과 같이 완전 무치악 환자에서 하악 흡착 의치를 통한 총의치 수복은 만족스러운 유지와 기능을 회복할 수 있었기에 본 증례를 보고하고자 한다.

• 대한족부족관절학회지
• /
• 제21권1호
• /
• pp.21-26
• /
• 2017

Purpose: To evaluate the clinical outcome of an operation with early rehabilitation from ankle fracture in accordance with the injury type. Materials and Methods: A total of 136 patients (70 males and 66 females) who underwent surgery and early rehabilitation for ankle fractures between December 2008 and December 2013 were retrospectively reviewed. The average age was 47.9 years, with a range of 18~79 years. The mean follow-up period was 28.7 months, with a range of 24~102 months. All patients were classified in accordance with the Lauge Hansen classification and anatomic fracture site. Moreover, the presence of ligament injuries were documented. A short-leg cast was applied postoperatively for two weeks; thereafter, patients began the range-of-motion exercises after cast removal. Full weightbearing was allowed at 2 weeks postoperatively. Each patient was assessed radiologically and clinically based on the OlerudMolander score, visual analogue scale (VAS) for pain, joint stiffness, and capability of single heel raising. Results: Seventeen patients (12.5%) complained of postoperative pain (VAS score 1~3), and the incidence was higher in patients with trimalleolar fractures or associated ligament injuries. Twenty-three patients (16.9%) complained of postoperative ankle stiffness. The mean Olerud-Molander score was 75.4/80 (range, 55~80). Olerud-Molander scores were lower in patients with ligament injuries than in those with fracture alone. There was no nonunion or fracture displacement even after early weightbearing walking. Conclusion: In this retrospective series, early rehabilitation after surgical restoration of ankle mortise by anatomical reduction and stabilization was shown to be successful. Earlier motion exercise and weightbearing walking can minimize fracture complications like joint stiffness or weakness in ankle fracture.

• Archives of Plastic Surgery
• /
• 제39권4호
• /
• pp.412-416
• /
• 2012

Background Even though the quality of medical and surgical care has improved remarkably over time, iatrogenic injuries that require surgical treatment including injuries caused by cast and elastic bandage pressure, extravasation, and dopamine-induced ischemia still frequently occur. The goal of this study was to estimate the incidence and analyze the distribution of iatrogenic injuries referred to our department. Methods A retrospective clinical review was performed from April 2006 to November 2010. In total, 196 patients (116 females and 80 males) were referred to the plastic surgery department for the treatment of iatrogenic injuries. We analyzed the types and anatomic locations of iatrogenic complications, along with therapeutic results. Results An extravasation injury (65 cases, 37.4%) was the most common iatrogenic complication in our study sample, followed by splint-induced skin ulceration, dopamine-induced necrosis, prefabricated pneumatic walking brace-related wounds and elastic bandage-induced wounds. Among these, prefabricated pneumatic walking brace-related complication incidence increased the most during the 5-year study period. Conclusions The awareness of the very common iatrogenic complications and its causes may allow physicians to reduce their occurrence and allow for earlier detection and referral to a plastic surgeon. We believe this is the first study to analyze iatrogenic complications referred to a plastic surgery department in a hospital unit.