• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.473-478
• /
• 2000

The TiO2 powder with the values of the large specific surface area more than 150$m^2$/g has been prepared with the homogeneous precipitation process below 5$0^{\circ}C$ and its formation mechanism was investigated using the SEM, TEM and Raman Spectroscopy. With the spontaneous hydrolysis of aqueous TiOCl2 solutions, all the precipitates were fully and homogeneously crystallized with the rutile TiO2 phase simply by heating, which as transformed to the anatase TiO2 phase as increasing the addition of SO42- ions to the aqueous TiOCl2 solution. The precipitates were formed with spherical secondary particles which consisted of acicular, spherical and mixed primary particles corresponding to the rutile, anatase and mixed phases, respectively. It can be thought that the formation and phase determination of crystalline TiO2 powders even at ambient temperature would be related with the existence of the capillary force. This force might be varied depending on the shape change of the primary particles.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.91-95
• /
• 2002

Titannium tetra-isoporpoxide의 가수분해 반응을 이용하여 nanosize의 $TiO_2$powder를 합성하고, 가수분해 반응에 있어서 촉매로 사용되는 HCI과 $NH_4$OH의 첨가량에 따른 반응양상과 생성된 $TiO_2$분말의 특성의 변화를 조사하였다. 염기성 촉매인 $NH_4$OH,를 사용하였을 경우에 균질한 형상의 powder 형태의 $TiO_2$를 합성할 수 있었으며, 산성 촉매인 HCI을 사 용하여 p보가 5.04 이하일 경우에는 괴상이나 과립의 형태로 생성되었다. 사용한 촉매의 종류와 양에 따라 저온의 결정상인 anatase의 생성속도와 보다 안정한 rutile상으로의 상전이 속도가 영향을 받았다.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.33-37
• /
• 2016

10 wt.% and 20 wt.%$Li-TiO_2$ composite powders are synthesized by a sol-gel method using titanium isopropoxide and $Li_2CO_3$ as precursors. The as-received amorphous 10 wt.%$Li-TiO_2$ composite powders crystallize into the anatase-type crystal structure upon calcination at $450^{\circ}C$, which then changes to the rutile phase at $750^{\circ}C$. The asreceived 20 wt%$Li-TiO_2$ composite powders, on the other hand, crystallize into the anatase-type structure. As the calcination temperature increases, the anatase $TiO_2$ phase gets transformed to the $LiTiO_2$ phase. The peaks for the samples obtained after calcination at $900^{\circ}C$ mainly exhibit the $LiTiO_2$ and $Li_2TiO_3$ phases. For a comparison of the photocatalytic activity, 10 wt.% and 20 wt.% $Li-TiO_2$ composite powders calcined at $450^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$ are used. The 20 wt.%$Li-TiO_2$ composite powders calcined at $600^{\circ}C$ show excellent efficiency for the removal of methylorange.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.344-353
• /
• 2018

Plasma electrolytic oxidation of Ti-25Ta-xHf alloy in electrolyte containing Ca and P for dental implants was investigated using various experimental techniques. Ti-25Ta-xHf (x=0 and 15 wt.%) alloys were manufactured in an arc-melting vacuum furnace. Micropores were formed in PEO films on Ti-25Ta-xHf alloys in 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at 240 V, 270 V and 300 V for 3 min, respectively. The microstructure of Ti-25Ta-xHf alloys changed from (${\alpha}^{\prime}+{\alpha}^{{\prime}{\prime}}$) phase to (${\alpha}^{{\prime}{\prime}}+{\beta}$) phase by addition of Hf. As the applied potential increased, the number of pore and the area ratio of occupied by micro-pore decreased, whereas the pore size increased. The anatase phase increase as the applied potential increased. Also, the crystallite size of anatase-$TiO_2$ can be controlled by applied voltage.

• 공업화학
• /
• 제29권3호
• /
• pp.298-302
• /
• 2018

질소가 도핑된 이산화티타늄의 광촉매 특성을 알아보았다. 질소가 도핑된 이산화티타늄에 대하여 자외선 및 가시광선 분위기에서 메틸렌블루 광촉매 분해를 수행하였다. XPS 분석을 통해 제조한 $TiO_2$에서 질소(N)가 산소(O)와 치환되었음을 확인하였다. UV-Vis DRS 분석 결과 질소가 도핑된 무정형 $TiO_2$ 시료에서는 가시광선을 거의 흡수하지 않고 자외선을 흡수하는 반면 무정형/anatase 혼재 $TiO_2$ 시료의 경우 가시광선 흡수가 상당히 증가하였다. 질소가 도핑된 anatase $TiO_2$ 시료는 자외선 및 가시광선 조사에서 메틸렌블루 광분해 반응이 나타났다. 그러나 가시광선 조사에서 분해율은 자외선 조사의 분해율보다 낮았다. 무정형/anatase 혼재 $TiO_2$ 시료의 경우 자외선과 가시광선 조사에서 anatase $TiO_2$ 시료의 분해율보다 높았다. 이러한 결과는 anatase $TiO_2$ 시료에 비해 3배 정도 큰 무정형/anatase 혼재 $TiO_2$ 시료의 높은 표면적이 질소 도핑된 작은 anatase 입자와 관련이 있음을 보여준다.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.751-758
• /
• 2001

Anatase $TiO_2$ thin films as a photocatalyst were prepared by the D.C reactive magnetron sputtering process. The $TiO_2$ thin films were deposited on Si(100) substrates under the various conditions : oxygen partial pressure, working pressure, substrate temperature, D.C power, and deposition time. The morphology of the TiO$_2$ thin films showed an island structure. At early stages of film growth, amorphous phase formed. However, during the further growth, columnar crystalline $TiO_2$grains evolved. The crystallinity of the thin films depended on the oxygen partial pressure, the working pressure and the D.C. powers.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.402-404
• /
• 2009

The band structures and the densities of states at the Fermi energy for rutile, anatase and brookite phases are investigated along with the structure-photocatlaytic relationship by using DFT method. Bands are less dispersive in anatase phase than in rutile phase, and they are almost flat in brookite phase. As a result, the DOS value near the Fermi energy for brookite is highest among three types of $TiO_{2}$, which means that the numbers of electrons near the Fermi energy are largest in brookite. The calculation shows that brookite phase may exhibit highest photocatalytic efficiency among three types of $TiO_{2}$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.179-180
• /
• 2010

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.487-492
• /
• 2019

Titanium dioxide (TiO₂) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO₆ structure share.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.39-45
• /
• 2003

Nano-TiO$_2$ photocatalytic coatings were deposited on the stainless steel 304(50$\times$70$\times$3mm) by the APS(Atmospheric Plasma Spraying). Photocatlytic reaction was tested in MB(methylene blue) aqueous solution. For applying nano-TiO$_2$ powders by thermal spray, the starting nano-TiO$_2$ powder with 100% anatase crystalline was agglomerated by spray drying. Plasma second gas(H$_2$) flow rate and spraying distance were used as principal process parameters which are known to control heat enthalpy(heat input). The relationship between process parameters and the characteristics of microstructure such as the anatase phase fraction and grain size of the TiO$_2$ coatings were investigated. The photo-decomposition efficiency of TiO$_2$ coatings was evaluated by the kinetics of MB aqueous solution decomposition. It was found that the TiO$_2$ coating with a lower heat input condition had a higher anatase fraction, smaller anatase grain size and a better photo-decomposition efficiency.