• 전기학회논문지
• /
• 제58권10호
• /
• pp.1982-1988
• /
• 2009

$TiO_2$ films are fabricated using silk printing method. Heat treatment temperature of films is 600[$^{\circ}C$]. From the analysis of microstructure, grain size of $TiO_2$ films is about $0.2{\sim}0.3[{\mu}m]$. Thickness of films is 30.19[${\mu}m$] and surface uniformity of films is good. From the analysis of crystalline structure, $TiO_2$ films transform anatase phase to rutile phase. Capacitance of films increases according to increase relative humidity and decrease measuring frequency. Hysteresis characteristics of capacitance and impedance are best at 45[%RH] and 75[%RH] respectively. Impedance of films increases according to decrease measuring frequency.

• 한국포장학회지
• /
• 제9권1호
• /
• pp.11-18
• /
• 2003

The pure $TiO_2$ particles have been prepared in vapor-phase hydrolysis of titanium tetraisopropoxide(TTIP). The rate of TTIP hydrolysis was so fast that the overall rate of formation of $TiO_2$ was controlled by the rate of mixing of TTIP and $H_2O$. Thus, the primary $TiO_2$ particles were prepared in nano sizes to form chainlike aggregates due to rapid coagulation. The pure $TiO_2$ particles as prepared were amorphous at the reactor set temperatures below $400^{\circ}C$ and became anatase at the temperatures of $450^{\circ}C$ above while the weak rutile peaks were also observed above $800^{\circ}C$. The actual size of primary particles as prepared were reduced by increasing the reactor set temperature while their crystalline sizes as well as BET sizes increased by post-sintering.

• Bulletin of the Korean Chemical Society
• /
• 제12권1호
• /
• pp.80-85
• /
• 1991

Laser Raman spectroscopy has been used to study the tungsta catalyst supported on titania. The surface tungsten species which forms on titania after calcination appeared to possess a structure that is independent of the initial impregnation condition. The surface polytungstate seemed to be stable only at the interfacial region since the crystalline WO$_3$ phase was observed as long as the tungsta loading was in excess of monolayer coverage. The close intact and strong interaction between the polytungstate and the titania could be evidenced from the inhibition of the phase transition of TiO$_2$ from anatase to rutile.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.594-602
• /
• 1998

유기용메인 이소옥탄(isooctane)에 계면활성제를 이용하여 물을 역마이셀 형태로 생성시킨 후, 이소프로필 알코올(isopropyle alcohol)에 묽힌 티타늄알코옥사이드(tetraisopropyl orthotitanate)를 가하여 가수분해 반응를 거쳐 TiO(OH)2 분말을 제조하였다. 역마이셀에 의한 TiO(OH)2 분말 제조에 미치는 공정변수들인 계면활성제의 종류, 농도, 보조계면활성제, 가수분해 반응온도, pH등이 생성된 입자의 크기, 모양, 입도분포에 미치는 영향을 규명하였다. 비이온계활성제인 Span 80을 사용하였을 경우에는 Span 80의 농도변화, 가수분해 반응온도 변화, pH변화에 무관하게 입도분포가 uninodal형태였으나, 음이온계면활성제인 Aerosol-OT(AOT)를 사용하였을 경우, binodal형태를 나타내었다. 에타올(ethanol)을 cosurfactant로 첨가한 계(AOT, 1.0CMC, isooctane+ethanol, pH2.5, 30$^{\circ}C$)로 부터 생성된 입자는 평균입경이 0.12${\mu}{\textrm}{m}$ 으로서 미세할 뿐아니라 입도분포도 매우 좁은 것을 알 수 있다. 따라서, cosurfactant의 유무가 생성 입자의 입도분포에 큰 영향을 미치는 것을 알 수 있다. FT-IR 분석으로 T1-O 결합과 Ti-OH 결합에 의한 흡수피크를 확인하였고, TGA-DTA 분석결과에 의하면 41$0^{\circ}C$ 부근의 발열피크로 부터 비정질 구조에서 anatase 구조로 결정화가 시작됨을 알 수 있었으며, 온도 상승과 더불어 결정이 성장하여 약 45$0^{\circ}C$ 정도에서 비정질상이 anatase상의 결정구조로 완전히 전이됨을 확인하였다.

• 공업화학
• /
• 제19권3호
• /
• pp.351-356
• /
• 2008

비이온성의 N P-10 (Polyoxyethylene Nonylphenol Ether: $C_9H_{19}C_6H_4(OCH_2CH_2)_{10}OH$) 계면활성제를 사용하여 나노크기의 $TiO_2$를 제조하였으며, TGA-DTA TEM, XRD, FT-IR 등을 사용하여 마이크로에멀젼을 이용한 나노입자 제조시 $W_o$ ($H_2O/AOT$)비에 따른 입자의 크기 및 결정성 등 물리적 성질을 조사하였다. 또한 제조된 $TiO_2$ 나노입자의 광촉매적 특성을 알아보기 위해 회분식 반응장치를 이용하여 p-nitrophenol의 광분해반응의 활성을 조사하였다. 제조된 $TiO_2$ 나노입자는 $300{\sim}600^{\circ}C$의 소성온도 범위에서 anatase 구조가 형성되었으며, 소성온도 $700^{\circ}C$에서 anatase 구조에서 rutile 구조로 전이되기 시작하였다. 입자크기는 $W_o$ 비가 증가함에 따라 증가하였고, 반면에 p-nitrophenol의 광분해반응에서 반응성은 감소하였다. 또한 $400{\sim}500^{\circ}C$에서 소성된 $TiO_2$ 촉매가 순수한 anatase 구조를 가지며 가장 높은 p-nitrophenol 분해활성을 보여주었다.

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.224-230
• /
• 2008

In this article, $TiO_2$ nanoparticles were synthesized by using $O_2$-enriched coflow, hydrogen, diffusion flames. We investigated the thermal stability of the flame-synthesized $TiO_2$ nanoparticles by examining the crystalline structures of the nanoparticles. Also, the results were compared with those of commercial P-25 nanoparticles. $TiO_2$ nanoparticles, which were spherical with diameters approximately ranging from 30 to 60nm, were synthesized. From the XRD analyses, about 96wt% of the synthesized nanoparticles were anatase-phase. After the heat-treatment at $800^{\circ}C$ for 30 minutes, the synthesized $TiO_2$ nanoparticles showed no significant changes of their shapes and crystalline phases. On the other hand, most of the commercial particles sintered with each other and changed to the rutile-phase. Based on the result of XRD analysis it is believed that the flame-synthesized $TiO_2$ nanoparticles have higher thermal stability at $800^{\circ}C$ than the commercial particles.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.349-356
• /
• 2011

During the process of synthesis of $TiO_2$ powders using a high-speed planetary milling machine, Fe metallic powders were created which could be dissolved in sulfuric acid solution. With adding $NH_4OH$ solution to the $TiO_2$ powder, it was found that the crystal structure of the synthesized powder did not change and the crystal size decreased slightly. However, when the sulfur powder is mixed with $TiO_2$, the crystal structure of the MA powder was changed from anatase into rutile phase and its size decreased significantly which is in the order of nm in diameter. In case of mechanical alloying with $TiO_2$ powder only, the crystal structure of the powder was transformed into rutile phase and its size was greatly reduced into several nm. Because its size becomes fine, the energy band gap of its rutile phase is larger than that of bulk states (3.0eV).

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.427-431
• /
• 2012

The $TiO_2$ foam synthesized using freeze-casting is a promising photocatalyst and photovoltaic electrode for a variety of energy applications, because the freeze-casting technique is easy to use, cheap, and suitable for mass-production. Despite its several advantages, little scientific information is available on the processing and morphology of the $TiO_2$ foams processed by freeze-casting. In particular, no systematic study has been performed on the microstructural evolution and morphological change of the rutile-phase $TiO_2$ foams during sintering. Therefore, in the present study, several $TiO_2$ foam samples were produced using the freeze-casting technique, which were then sintered at a relatively high temperature of $1200^{\circ}C$ for 1, 2, and 4 h to compare the morphological changes in the microstructure and to understand the effects of processing parameters of the rutile-phase $TiO_2$ foams. The foam ligament size increased near linearly with increasing sintering time whereas the average pore size decreased only slightly with increasing sintering time, with changes in particle morphology from sphere to rod and complete phase transformation from anatase to rutile.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.411-419
• /
• 2004

Titania particles are widely used as a photocatalyst to treat various contaminants in air and water. Titania particles were formed by vapor-phase oxidation of titanium tetraisopropoxide (TTIP) in a tube furnace between 773 and 1,273 K. The effect of process variables such as furnace temperature, flow rate of carrier air, and flow rate of sheath air on powder size and phase characteristics was investigated using a scanning mobility particle sizer (SMPS), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The size distribution of synthesized titania particles was characterized with mode diameter and peak concentration. The mode diameter ranging from 20 to 80 nm decreased with increasing flow rates of sheath air and carrier air, and increased with increasing furnace temperature. The peak concentration increased with increasing flow rates of sheath air and carrier air The best synthetic condition for high production rate can be derived from the experimental data set represented by mode diameter and peak concentration. The crystal structure of synthesized titania particles was found to be anatase phase, ensuring high photocatalytic potential.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.88-96
• /
• 1998

The structural and electrical properties of titanium dioxide(TiO2) thin films deposited on p-type (100) si and 4$^{\circ}$off(100) Si substartes by metalorganic chemical vapor deposition (MOCVD) have been studied with post rapid thermal annealing. TiO2 thin films of anatase phase were grown at 300-500$^{\circ}C$ using titanium post rapid thermal annealing at a temperature of 800$^{\circ}C$ for 30sec. rutile phase was observed in the condition of the deposition temperature over 350$^{\circ}C$ in the ambient air atmosphere and at 500$^{\circ}C$ in cacuu,. SEM and AFM study show-ed surface roughness were increased slightly from 40${\AA}$to 55${\AA}$ after annealing due to grain growth and phase transformation. From capacitane-voltage measurement of Al/TiO2./p-Si structure after annealing we obtained ideal capacitance-voltage characteristics of MOS structure with dielectric constant of 16-22 in case of (100) Si and about 30- in case of 4$^{\circ}$off(100) Si but showed the higher leakage current.