• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.500-503
• /
• 1997

In this paper, a method for recognizing 3-D objects using the 3-D Hough transform and the robust stereo vision is studied. A 3-D object is recognized through two steps; modeling step and matching step. In modeling step, features of the object are extracted by analyzing the IGES file. In matching step, the values of the sensed image are compared with those of the IGES file which is assumed to location and orientation in the 3-D Hough transform domain. Since we use the 3-D Hough transform domain of the input image directly, the sensitivity to the noise and the high computational complexity could be significantly allcv~ated. Also, the cost efficiency is improved using the robust stereo vision for obtaining depth map image which is needed for 3-D Hough transform. In order lo verify the proposed method, real telephone model is recognized. Thc results of the location and orientation of the model are presented.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.41-48
• /
• 1997

A nondestructive quality inspection technique using acoustic impulse response method was studied to investigate the feasibility of egg shell inspection. An experimental system was built to generate impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seat, a microphone with preamplifier, and a digital oscilloscope connected to Personal Computer by RS-232C interface. The factors such as impulse generating method, egg holding method, and sensor location were evaluated by analyzing the power spectrum density of the measured signal. The results obtained are summarized as follows : 1. From the sampled eggs, the proper conditions for detecting damaged eggs were found as followings; ceramic for the impact ball material, rubber for egg seat material, 20 degrees for an impact angle of pendulum, 10mm for the distance between egg and sensor, the sharp side for impacting part, and 180 degrees for the location of sensor. 2. Examination of the Fourier transformed analysis in beth normal and damaged eggs revealed that those factors such as the resonant frequency, a number of peak frequencies and the magnitude of power spectrum were important to detect damaged eggs.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.430-441
• /
• 2018

The adverse health impact of air pollution is becoming more serious. The purpose of this study is twofold: One is to analyze the effect of air pollution and temperatures on human health by analyzing the number of deaths from cardiovascular disease in Seoul, Korea; the other is to determine what impact the location of a monitoring site has on the results of a health study. For this latter purpose, air pollution and temperature monitors are sited at three locations termed green, public, and residential. Then, a decision tree model is used to analyze factors linked with deaths occurring at each monitoring site. The results show that the environmental temperatures before death and the $PM_{2.5}$ concentrations on the day of death are highly linked with the number of deaths regardless of the monitoring location. However, results are most accurate with residential data. The results of this study can be used as base data for a similar analysis and ultimately, as a guide to minimize the health impact of air pollution.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.919-924
• /
• 2009

Geographical location carries information such as demography, local economy, environment, and life styles, which could be the sources of cancer occurrence. Analyzing geographical location associated with cancer occurrence can be instructive to physicians, patients, and health administrators regarding resource allocation, expenditures, prophylaxis and treatments. In this paper, we explored the correspondence relationship between geographical locations and mortality rates of the cancers using correspondence analysis and illustrated the approach with the mortality rates of the top 10 cancers in the 75 counties in Arkansas from 2001 to 2005. Geographical variations with respect to the mortality rates of cancers are evaluated across Arkansas counties. Based on the contingency table, correspondence analysis model is developed and the simple indices which indicate the degree to which the regions and the cancers affect each other are calculated. Quantitative results are visualized and mapped in two-dimensional graphs.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2958-2968
• /
• 2020

Understanding public perception on nuclear research reactor is necessary for the policy maker to adopt such technology in Thailand, especially the locals who live in the proposed location. The study compared perceptions between the locals living near the proposed nuclear research reactor location (within 5 km) and those living in the outer region (5-15 km). Structural equation modeling technique was adopted by assuming casual relationships between latent variables including social status, information perception, trust, benefit perception and risk perception on the local acceptance of research reactor. The results showed that the strongest relationships for both the inner and the outer perimeters were from information perception toward technology acceptance via trust and benefit perception. While both zones showed similar results, the outer perimeter seemed to show slightly stronger effects than those in the inner perimeter.

• International Journal of Contents
• /
• v.7 no.4
• /
• pp.19-23
• /
• 2011

This paper proposes a segmentation method for overlapped vehicles based on analysis of the vehicle location and the spatiotemporal association information. This method can be used in an intelligent transport system. In the proposed method, occlusion is detected by analyzing the association information based on a vehicle's location in continuous images, and occlusion segmentation is carried out by using the vehicle information prior to occlusion. In addition, the size variations of the vehicle to which association tracking is applied can be anticipated by learning the variations according to the overlapped vehicles' movements. To assess the performance of the suggested method, image data collected from CCTVs recording traffic information is used, and average success rate of occlusion segmentation is 96.9%.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.583-590
• /
• 2002

When a mechanical structure is driven by stationary wide band random point forces, the resulting vibration depends upon the number, location, and joint statistical properties of the exciting forces. In this study, under the assumption of light damping, an approximate procedure for analyzing plates is briefly outlined. The effects of number, location and correlation of the force field on the vibration level are then investigated for various cases in which random point forces with band limited white noise are applied, and the optimal spacing between input forces that produces a relative minimum in the vibration response is predicted.

• Journal of architectural history
• /
• v.23 no.2
• /
• pp.65-80
• /
• 2014

This study was aimed at analyzing the location and the characteristics of the Urban hanok tissues that were formed in the downtown since 1920s. Focusing on the relationship between roads and lots, the developing process and the typological characteristics are examined. Through dividing the large and medium lots of the aristocratic families and on the hilly area near the Seoul City Wall, various shapes of urban hanok tissue were evolved. The urban hanok tissues developed before 1936 locate on the downtown sites, while those developed after 1936 locate on the hilly sites. The location of the tissues were identified in the upper area of Jong-no street. The former is composed of small size lots divided into average area $104.4m^2$ with the narrow alleys of about 2.0m width, while the latter is composed of medium size lots divided into average area $131.54m^2$ with the alleys of about 4.0m width. Moreover the structures of the tissues were evolved based on the developing period and the site condition. Moreover the structures of the tissues were evolved based on the developing period and the site condition. The typological characteristics were defined as the four patterns categorized with the bilateral concepts of alley's form and of alley's spacial feature.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.65-71
• /
• 2001

In this paper, acoustic omission technique(AE) has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250KHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by searching for the point of highest signal amplitude by comparing wi th several fired sensors.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.92-96
• /
• 2016

Although deregistration attack is caused by simple spoofing the REGISTER message of a legitimate SIP UA, its impact is serious. The root cause of this attack is based on the fact that RFC 3261 allows the UA to remove the binding from the Location Server. In this paper, we propose a simple protection method to allow Registrar or Location Server just to ignore deregistration messages. We also show that this method works well by analyzing the process of registration and deregistration. Without any additional overhead such as an encryption or authentication, this method is able to establish a secure SIP environment efficiently protecting against the deregistration attack.