• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.17-31
• /
• 2012

순간변위시험(slug test) 결과를 이용하여 비정상 흐름을 고려한 연직차수벽의 투수계수를 평가할 수 있는 이론해는 지금까지 제시된 바가 없다. 무한 대수층에 부분 관입된 우물(well)형상에 적용 가능하도록 기존 문헌에서 제시한 이론해는 좁은 지중연속벽체 형상의 연직차수벽의 경계조건을 고려할 수 없다. 이러한 연직차수벽 경계조건을 고려하기 위해, 본 연구에서는 가상 우물이론(imaginary well theory)을 도입하여 두 가지 경계조건(즉, 일정 수두 조건과 불투수 조건)을 만족하도록 새로운 이론해를 유도하였다. 제안된 이론해를 이용하여 구한 연직차수벽에서 시간에 따른 수위 회복 곡선(Type Curve)을 무한 대수층의 경우와 비교한 결과, 일정 수두 경계조건을 적용할 경우, 우물의 수위 회복이 무한 대수층의 결과보다 빠르게 진행되고 반면에 불투수 경계조건을 적용할 경우는 더 느리게 진행되었다. 또한, 우물의 형상비가 클수록, 연직차수벽의 폭이 좁을수록, 우물의 편심 정도가 클수록, 연직차수벽과 주변 지반 사이의 경계조건의 영향이 커진다. 본 논문에서 제시한 이론해를 통해 산정된 Type Curve는 기존 문헌에서 수치해석을 통해 산정된 Type Curve와 유사한 경향을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.997-998
• /
• 2007

This paper deals with analytical solution concerning the image method using the magnetic charge instead of 3D FEA(finite element analysis) in the slotless single air-gap motor. The theory of analytical method and the design procedures are introduced. The reliability and validity of proposed analytical solution are verified through the comparison with the results of commercial 3D FE software. In addition, calculation time between proposed analytical solution and 3D FEA is compared. Finally, characteristics, such as Back-EMF and phase resistance, between calculated and experimental results are compared. From the verification with 3D FEA and experimental results, it is proved that presented analytical method provided very effective and precise results.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3655-3665
• /
• 1996

An analytical solution is presented for the conduction-dominated solidification of a binary mixture in a semi-infinite medium. The present approach differs from that of other solution by these four characteristics. (1) Solid fraction is determined from the phase diagram, (2) thermophysical properties in mushy zone are weighted according to the local solid fraction, (3) non-equilibrium solidification can be simulated and (4) the cooling condition of under-eutectic temperature can be simulated. Up to now, almost all analyses are based on the assumption of constant properties in mushy zone and solid fraction linearly with temperature or length. The validation for these assumptions, however, shows that serious error is found except some special cases. The influence of microscopic model on the macroscopic temperature profile is very small and can be ignored. But the solid fraction and average solid concentration which directly influence the quality of materials are drastically changed by the microscopic models. An approximate solution using the method of weighted residuals is also introduced and shows good agreement with the analytical solution. All calculations are performed for NH$_{4}$Cl-H$_{2}$O and Al-Cu system.

• 한국해안해양공학회지
• /
• 제10권4호
• /
• pp.165-173
• /
• 1998

파고와 주기 그리고 수심의 함수로 정의된 이류계수를 파고와 주기에 대한 결합분포함수와 확률적으로 결합하여 수중둔덕의 이동율을 예측할 수 있는 해석해를 유도하였다. 파랑의 비선형성에 의하여 유발되는 하상에서의 흐름이 표사의 이동을 유발한다는 가정하에 개념적 모형의 표사이동량 방정식을 사용하였다. 표사보존식에 표사이동량을 대입하여 시간에 따른 해저면의 변동을 나타내는 비선형 이류-확산 방정식을 얻을 수 있었다. 해석해에 의하면 수심이 증가할 수록 수중둔덕의 이동율은 지수적으로 감소하는 경향을 보였다. 그러나 스펙트럼에서 주파수 영역의 폭을 정의하는 계수, v의 값이 커지면 수중둔덕의 이동율은 증가하였다. 해석해에 의하여 예측된 수중둔덕의 이동율은 관측자료보다 과대평가하는 경향을 나타내나, 해석해를 유도하는 과정에 내포된 이론식의 제약성 및 입력자료의 부정확성 등을 고려할 때 전반적으로 해석해의 결과는 관측자료와 잘\ulcorner 일치한다고 볼 수 있다. 특히, 수심의 변화에 따른 해석해의 거동은 대상영역 외해에서 추정된 자료를 이용하여 이산화 기법으로 추정된 결과와 매우 잘 일치하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권2호
• /
• pp.17-25
• /
• 2003

Simple methods are developed to predict temperatures of a satellite box during launch stage. The box is mounted on outer surface of satellite and directly exposed to space thermal environment for the time period from fairing jettison to separation. These simple methods are to solve a 1st order ordinary differential equation (ODE) which is simplified from the governing equation after applying several assumptions. The existence of analytical solution for the 1st order ODE is determined depending on treatment of time-dependent molecular heating term. Even for the case that the analytical solution is not available due to the time dependent term, the 1st order ODE can be solved by relatively simple numerical techniques. The temperature difference between two different approaches (analytical and numerical solutions) is relatively small (Jess than $1^{\circ}C$ along the time line) when they are applied to STSAT-I launch scenario. The present methods can be generally used as tools to quickly check whether a satellite box is safe against space environment during the launch stage for the case that the detailed thermal analysis is not available.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.116-124
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding including the effect of molten metal. The solution is obtained by solving a transient three-dimensional heat conduction equation with convection boundary conditions on the surfaces of a plate, and mapping the infinite plate onto the fillet weld geometry with energy equation. The electric heat input on the fillet weld and on the infinite plate is assumed to have a combination of two bivariate Gaussian distribution. To check the validity of the solution. FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross-sections at various distances from the arc start point are compared with those of simulation result.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.65-70
• /
• 2000

An approximated analytical solution of mathematical model for the three phase fluidized bed bioreactor (TFBBR) was proposed using the linearization technique to describe oxygen utilization rate in wastewater treatment. The validation of the model was done in comparison with the experimental results. Satisfactory agreement was obtained in the comparison of approximated analytical solution and numerical solution in the oxygen concentration profile of a TFBBR. The approximated solutions for three modes of the liquid phase flow were compared. The proposed model was able to predict the biomass concentration, dissolved oxygen concentration the height of efficient column, and the removal efficiency.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.14-26
• /
• 1998

This paper deals with approximate analytical solutions for the two-region one-dimensional model describing the charging process of stratified thermal storage tanks at variable inlet temperature with momentum-induced mixing. An arbitrarily increasing inlet temperature is decomposed into inherent step changes and intervals of continuous change. Each continuous interval is approximated as a finite number of piecewise linear functions, which admits an analytical solution for perfectly mixed region. Using the Laplace transform, the temperature profiles in plug flow region with both the semi-infinite and adiabatic ends are successfully derived in terms of well-defined functions. The effect of end condition on the solution proves to be negligible under the practical operating conditions. For a Quadratic variation of inlet temperature, the approximate solution employing a moderate number of pieces agrees excellently with the exact solution.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.31-36
• /
• 2015

To describe turbulent wake behind a submarine, it is very important to know turbulent kinetic energy distributions in the wake. To get the distribution is to solve the turbulent kinetic energy equation, and to solve the equation, it is needed both information of ${\lambda}$ and ${\sigma}$ which define physical characteristics of the wake. This paper gives analytical solution of the equation, which is driven from $8^{th}$ order polynomial fitting, as a function of given ${\lambda}$, even though there is no information of ${\sigma}$. In comparison between numerical solution(i.e. exact solution) and analytical solution, the relative errors between them are less than to 5% in the range of 0 < ${\xi}$ < 0.95 in most given ${\lambda}$.

• 한국항만학회지
• /
• 제5권1호
• /
• pp.71-81
• /
• 1991

This study deals with the analytical and numerical solution for the combined wave reflection and diffraction near the impermeable rigid upright breakwater, subject to the excitation of a plane simple harmonic wave coming from infinity. Three cases are presented : a) the analytical solution near a thin semi-infinite breakwater, b) the analytical solution near the semi-infinite breakwaters of arbitrary edge angles, $30^{\circ},\;45^{\circ},\;and\;90^{\circ}$, c) the numerical solution near a detached thin breakwater the results are presented in amplification factor and wave height diagrams. Moreover, the amplification factors near the structure(2 wavelength before and behind the structure) are compared for the given cases. A finite difference technique for the numerical solution was applied to the integral equation obtained for the wave potential.