• 콘크리트학회지
• /
• 제10권4호
• /
• pp.125-133
• /
• 1998

본연구에서는 강섬유와 실리카흄의 혼입이 숏크리트의 리바운드율에 미치는 영향을알아보기 위하여 현장실험을 수행하였다. 실험은 보강방법(강섬유와 와이어메쉬), 강섬유 혼입율(0.0%, 0.5%. 0.75%, 1.0%), 실리카 흄 혼입율(0.0%, 10.0%), 타설부위(side wall, shoulder, crown)등의 4가지 변수를 중심으로 수행되었다. 실험결과, 타설부위가 side wall인 경우 , 강섬유보강숏크리트는 강섬유의 혼입률이 증가할수록 와이어메쉬보강숏크리트에 비해 20%~35%의 리바운드율의 감소효과를 나타내었다. 또한 이러한 리바운드율의 감소효과는 10%의 실리카흄을 혼입한 경우에는 더욱더 큰 폭으로 감소되는 경향을 보였으며, 타설부위가 shlulder와 crown인 경우에도 유사한 결과를 나타내었다. 한편 본 연구에서는 강섬유보강숏크리트에대한 기존의 2단계 리바운드 현상을 기초로, 골재와 강섬유간의 미시적인 상호작용에 따른 4단계의 리바운드 발생 현상을 추정하였다.

• 한국환경과학회지
• /
• 제28권11호
• /
• pp.1019-1025
• /
• 2019

The aim of this study was to analyze the light traits in a solar light-collector device and its effects on lettuce growth at an early growth stage. The three hyper parameters used were the reflector diameter (2 cm and 4 cm), coating inside the reflector (chrome-coated, non-coated) and distance from the light fiber (15 cm and 20 cm). The results showed that light efficiency, which is the ratio of light intensity inside the fiber to the solar intensity, improved by 41.1 % when using a 2 cm diameter chrome-coated reflector at a distance of 15 cm from the light fiber; whereas it only improved by 20.6% when a non-coated reflector was used. As the reflector size was increased to 4 cm, the light efficiency for the coated and non-coated reflectors increased by 28.5 % and 26.4 %, respectively, hence, no significant difference was observed. When the light fiber was placed at a distance of 20 cm, the increase in light efficiency with coating treatment was 8 % higher than without coating treatment. We also compared the efficiency of light-fiber treatment with that of LED treatment in our lettuce nursery, and observed that the plants exhibited better growth with light-fiber treatment. We observed an average increase of 1.7 cm in leaf height, $7cm^2/plant$ increase in leaf area, and 32 mm increase in root length upon light-fiber treatment as opposed to those observed with LED treatment. These findings indicate that the collector light-fiber is economically feasible and it improves lettuce growth compared with the LED treatment.

• 박물관보존과학
• /
• 제12권
• /
• pp.77-88
• /
• 2011

국립청주박물관 소장 숙명신한첩(보물 제 1629호)에 수록된 66편의 편지에 대한 보존처리 및 섬유조사를 실시하였다. 처리 전 상태는 표지가 결실되었고 본지는 습해에 의한 얼룩, 충해에 의한 결실 등의 손상이 많았으며 효종대왕 어서 1편은 별도의 액자에 보관되어 있었다. 첩을 해체하여 구 배접지 제거 후 낱장 분리된 편지에 대한 지질조사와 C-stain법을 이용한 섬유분석을 하였으며, 보존처리는 편지와 테두리의 결실부위 보수 후 액자로 분리되어 있는 편지 1편을 포함하여 전체를 하나의 첩으로 재 장황하였다.

• Carbon letters
• /
• 제18권
• /
• pp.56-61
• /
• 2016

Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N₂ gas at 800℃ for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and cross-linked cellulose as a result of the E-beam stabilization. The hemicellulose decreased the initial decomposition temperature, and the cross-linked bonds increased the carbonization yield of the cellulose fibers. Increasing the absorbed E-beam dose to 1500 kGy increased the carbonization yield of the cellulose-based carbon fiber by 27.5% upon exposure compared to untreated cellulose fibers.

• 패션비즈니스
• /
• 제18권2호
• /
• pp.80-94
• /
• 2014

The utilization of QR code for mobile marketing in fashion business has been receiving growing attention with the increasing smart phone users and wireless internet environment. The purpose of this study was to investigate the effects of utilizing QR code for mobile marketing on consumer's purchasing intention based upon TAM model. This research was conducted by questionnaire method, in which the questionnaire was distributed to the consumers in Seoul. Among the questionnaire returned from the consumers, 196 were selected to be included in the analysis by developing descriptive statistics, factor analysis, cronbach's alpha, and regression analysis using SPSS15.0. The results of this study were as follows: There was a significant effect of QR code characteristics such as usability, mobility, aesthetics of design on perceived ease of use. The factors of individuality, interactivity, and aesthetics of design significantly affected on the perceived usefulness of QR code. The ease of use and usefulness significantly affected the consumers' enjoyment which positively affected on purchasing intention.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.149-155
• /
• 2009

The thermal decomposition behavior and degradation characteristics off our different thermotropic liquid crystalline polymers (TLCPs) were studied. The thermal decomposition behavior was determined by means of thermogravimetric analysis (TGA) at different heating rates in nitrogen and air. The order of the thermal stability was as follows: multi-aromatic polyester > hydroxybenzoic acid (HBA)/hydroxynaphthoic acid (HNA) copolyester > HNA/hydroxyl acetaniline (HAA)/terephthalic acid (TA) copolyester > HBA/Poly(ethylene terephthalate) (PET) copolyester. The activation energies of the thermal degradation were calculated by four multiple heating rate methods: Flynn-Wall, Friedman, Kissinger, and Kim-Park. The Flynn-Wall and Kim-Park methods were the most suitable methods to calculate the activation energy. Samples were exposed to an accelerated degradation test (ADT), under fixed conditions of heat ($63{\pm}3^{\circ}C$), humidity ($30{\pm}4%$) and Xenon arc radiation ($1.10\;W/m^2$), and the changes in surface morphology and color difference with time were determined. The TLCPs decomposed, discolored and cracked upon exposure to ultraviolet radiation.

• 한국추진공학회지
• /
• 제23권5호
• /
• pp.36-42
• /
• 2019

본 연구에서는 리오셀 섬유를 사용하여 탄소직물을 제조함에 있어, 인계 난연제인 Phosphoric Acid(PA)와 가교제인 Melamine resin (MR)을 사용하여 섬유의 전처리를 수행하고 TGA, FT-IR, XRD, 중량 분석을 통하여 물리적, 화학적 구조 변화에 대하여 고찰하였다. 전처리를 통하여 내염화 및 흑연화된 직물의 경우 미처리 직물과 비교하여 중량 수율이 14.7%, 직물 폭과 길이의 수율이 각각 15%, 15.5% 증가함을 확인하였다. 이러한 결과는 셀룰로오스의 탈수반응을 촉진과 함께 섬유 표면에 char를 형성하고, 셀룰로오스 분자 내의 가교반응을 유도하여 내염화 시 안정한 구조 형성에 의한 효과로 설명할 수 있다.

• Computers and Concrete
• /
• 제30권2호
• /
• pp.113-126
• /
• 2022

Reinforced concrete bearing walls (RCBWs) are one of the most applicable structural systems. Therefore, vulnerability analysis and rehabilitation of the RCBW system are of great importance. In the present study, in order to the more precise investigation of the performance of this structural resistant system, pushover and nonlinear time history analyses based on several assumptions drawing upon experimental research were performed on several models with different stories. To validate the nonlinear analysis method, the analytical and experimental results are compared. Vulnerability evaluation was carried out on two seismic hazard levels and three performance levels. Eventually, the need for seismic rehabilitation with the basic safety objective (BSO) was investigated. The obtained results showed that the studied structures satisfied the BSO of the seismic rehabilitation guidelines. Consequently, according to the results of analyses and the desired performance, this structural system, despite its high structural weight and rigid connections and low flexibility, has integrated performance, and it can be a good option for earthquake-resistant constructions.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.73-78
• /
• 1997

분자량 약 7000의 Fcp는 효소분해역반응을 이용하는 것에 의해 분자량 약 17000과 약 24000까지 고분자량화된 PIFcp가 얻어졌다. 또, 효소분해의 역반응에 의해 고분자량화되는 것은 일부의 Fcp이며 Silk II형결정으로부터 Silk I형결정으로 전이하는 것은 대부분의 Fcp에서 나타났다. 이 PIFcp는 X선회절과 시차열분석(DTA)의 결과로부터 어느정도 안정한 Silk I형의 결정구조를 가지는 것이 확인되었다.

• 한국의류학회지
• /
• 제9권3호
• /
• pp.35-44
• /
• 1985

This research explored the effects of abrasion, laundering, and abrasion/laundering interaction upon wear of 15 durable nonwoven fabrics. Wear was measured in terms of changes in tensile strength and stiffness. The test materials consisted of nine different dry-laid commercial interfacing fabrics of various fiber contents and six spunbonded poyester and polypropylene fabrics. Three fixed levels of abrasion and four fixed levels of laundering made up the 3$\times$4 factorial analysis used for the experiment and the analysis of variance. Findings revealed that abrasion had a greater effect than laundering on strength and stiffness of the tested fabrics. Laundering seemed related to the particular fibers used and to the fixation quality of fiber bonds. Spunbonded webs performed better than dry-laid webs in retaining tensile strength Stiffness change occurred more readily than strength change. Lighter, flexible, stretchable fabrics seemed less easily abraded than heavier, stiff, less stretchable fabrics. The interfacing fabrics of 70/20/$10\%$ nylon/polyester/rayon blends with high crosswise stretchability effectively resisted wear caused by abrasion and laundering. Further research is recommended to study the effects of longer abrasion periods and additional laundering cycles o,1 wear qualities of nonwoven fabrics. Additional factors such as amount and fixation methods of bonding agents, the effect of shear distortion, seam construction, and drycleaning solvents could also be studied.