• Computers and Concrete
• /
• v.12 no.5
• /
• pp.717-737
• /
• 2013

In this study, experiment and numerical analysis were conducted to identify the heat transfer characteristics and behavior of high-strength concrete upon a fire. The numerical analysis was employed to forecast the characteristics and properties of the high-strength concrete upon a fire, which can not be accomplished through a fire test due to the specific conditions and restrictions associated with the test. The result of the numerical analysis was compared with that of the test to verify the reliability of the analysis. In the numerical analysis of the heat transfer characteristics and behavior of 80 and 100 MPa high-strength concrete upon a fire, the commercial software of ABAQUS(V.6.8) was used. It was observed from the experiment that the contraction of the concrete with fiber-cocktail was mitigated by 25~55 % compared with that without fiber-cocktail because the fiber controlled the heat transfer of the concrete and thus improved the fire-resistance performance of the column.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.12-26
• /
• 2012

Fashion industry characteristically goes through many steps to manufacture and to retail apparel products. Complex inter-industry channels with many intermediaries in fashion industry provoked many problems regarding recognizing customer's need, delivering time, flexibility, and inventory control. Therefore, the purposes of this study were to investigate the differences between apparel manufacturing and distribution process in SCM success factors and performances, and to investigate how SCM success factors affect on performances. Questionnaire was developed and distributed to apparel industry. The returned 116 questionnaires were analyzed by Cronbach's alpha for internal validity, factor analysis, t-test, and regression analysis with SPSS14.0. The results of this study were as follows: There was significant difference of SCM success factors between apparel manufacturing and distribution regarding process standardization and integration. There were significant differences of SCM performances such as reaction for customer, flexible management, cost minimization, and maximized asset utilization which distribution was higher than apparel manufacturing process. In apparel manufacturing, SC strategic relation, and integrative management influenced upon reaction for customer of SCM performances. SC integrative management influenced upon cost minimization. SC integrative management influenced upon maximized asset utilization. In distribution, SC strategic relation, and activated support for SCM influenced upon reaction for customer of SCM performances. SCM specialization, credible relationship among supply chains, activated support for SCM, and SC integrative management influenced upon cost minimization. SCM specialization, credible relationship among supply chains, and SC integrative management influenced upon maximized asset utilization.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

The reliability of machined fiber reinforced composites (FRC) in high strength applications and the safety in using these components are often critically dependent upon the quality of surface produced by machining since the surface layer may drastically affect the strength and chemical resistance of the material [1,2,3,4]. Current study will discuss the characterization of fiber pull-out in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the fiber pull-out and the AR coefficients is examined first and effects of fiber orientation, cutting parameters and tool geometry on the fiber pull-out are also discussed.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.438-442
• /
• 2013

In the present work, electroless plating was used for coating thin films consisting mainly of Ni and P on carbon fiber. Structural changes appeared upon the post-annealing at various temperatures of the Ni-P film on carbon fiber was studied using various analysis methods. Scanning, a flat surface structure of Ni-P film on carbon fiber was found after electroless plating of Ni-P film on carbon fiber without post-annealing, whereas annealing at $350^{\circ}C$ resulted the formation of porous structures. With increasing the annealing temperature to $650^{\circ}C$ with an interval of $50^{\circ}C$, the pore size increased, but the density decreased. X-ray diffraction (XRD) showed the existence of metallic Ni, and Ni-P compounds before post-annealing, whereas the post-annealing resulted in the appearance of NiO peaks, and the decrease in the intensity of the peak of metallic Ni. Using X-ray photoelectron spectroscopy (XPS), phosphorous oxides were detected on the surface upon annealing at $650^{\circ}C$, and $700^{\circ}C$, which can be attributed to the phosphorous compounds originally existing in the deeper layers of the Ni films, which undergo sublimation and escape from the film upon annealing. Escape of phosphorous species from the bulk of Ni-P film upon annealing could leave a porous structure in the Ni films. Porous materials can be of potential applications in diverse fields due to their interesting physical properties such as high surface area, and methods for fabricating porous Ni films introduced here could be easily applied to a large-scale production, and therefore applicable in diverse fields such as environmental filters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.541-550
• /
• 1997

Anaerobic chytridiomycete fungi are now well recognized as one of the major components of rumen microflora. Since the discovery of anaerobic fungi, the knowledge upon their morphology and physiology has been accumulated. It is certain that they gave roles in ruminal fiber digestion, although their quantitative contribution to rumen digestion is still unclear. Their role in fiber digestion is complicated by the dietary factors and the interaction with other microorganisms. We aim at reviewing such information in this article. Considerable attention gas been paid to the polysaccharidase of these fungi. Analysis on the fungal genes encoding these enzymes has been performed in several laboratories. This article also covers the genetical analysis of fungal polysaccharidases.

• Composites Research
• /
• v.30 no.5
• /
• pp.267-272
• /
• 2017

In this study, SiC powder was added to twill woven carbon fiber reinforced plastic (CFRP) composites to improve its mechanical properties. An acoustic emission (AE) frequency analysis method was suggested for the prediction of failure behaviors. Tensile tests were conducted and the fracture characteristics of each component of the SiC reinforced composite were evaluated using AE. The results showed that SiC powder improved the strength of twill woven CFRP composites and the fracture behavior of the SiC reinforced CFRP composite and its crack extension could be effectively evaluated on the basis of the specific AE frequency bands which are 100 to 228 kHz and 428 to 536 kHz upon the resin failure and 232 to 424 kHz due to addition of SiC powder and 576 to 864 kHz at the fiber breakage.

• Carbon letters
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2004

The effects of fiber surface-treatment and sizing on the dynamic mechanical properties of unidirectional and 2-directional carbon fiber/nylon 6 composites by means of dynamic mechanical analysis have been investigated in the present study. The interlaminar shear strengths of 2-directional carbon/nylon 6 composites sized with various thermosetting and thermoplastic resins are also measured using a short-beam shear test method. The result suggests that different surface-treatment levels onto carbon fibers may influence the storage modulus and tan ${\delta}$ behavior of carbon/nylon 6 composites, reflecting somewhat change of the stiffness and the interfacial adhesion of the composites. Dynamic mechanical analysis and short-beam shear test results indicate that appropriate use of a sizing material upon carbon fiber composite processing may contribute to enhancing the interfacial and/or interlaminar properties of woven carbon fabric/nylon 6 composites, depending on their resin characteristics and processing temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.593-598
• /
• 2002

Routinely, strength method for the determination of the nominal moment of reinforced concrete beam is assumed to also be suitable for strengthening beams with carbon fiber sheets since typically strengthening beams compromise 98% by volume of reinforced concrete. Flexural capacity of strengthening beam is absolutely dependent upon the type of reinforcement materials, amount of reinforcement, anchoring system, adhesion capacity between reinforcement material and concrete. Therefore, it might be incorrect to use strength method for analysis and design of strengthening beam without considering the differences in the load-deflection curves, mechanism of failure, state of stress distribution, failure strain of the reinforcement. An flexural analysis based on force equilibrium and strain comparability has been developed for strengthening beam. Systematic experimental investigations are compared with analytical results. Then, the adaptation of strength method for strengthening beam have also been discussed.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.16-27
• /
• 2011

Consumers fill up not only their needs but also their own identity through apparel product and company. From this point of view, Brand personality is essential to convey customer's personality through advertizing influencing on buying behavior. This study investigates how personality factors of brand and advertising model and personality congruence influenced upon brand equity in casual apparel brands. The research methodology was questionnaire distributed to individuals who used to buy casual apparel brand. A total of 58 returned questionnaires were analyzed by internal validity, factor analysis and regression analysis with SPSS 12.0. The results of this study are as follows: in casual apparel brands, personality factors of brand and advertising model influence on personality congruence. Personality congruence influences on brand recognition and brand loyalty among brand equity.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.113-124
• /
• 1993

Thermogravimetric analysis of copolymer of acrylonitrile(95%) and methyl acrylate(5%) have been carried out to investigate the activation under $H_2O$(30%) -$N_2$atmosphere at various heating rates. The kinetic equation [$f=1-\exp(-a{\Delta}T)^b$] which was derived on the basis of the nonisothermal activation process of carbon fiber in the $H_2O$(30%)-$N_2$system showed good agreement with experimetal results. The pore volume upon conversion was in good agreement with the model of theoretical pore volume. The pore structures of the activated carbon fiber were influenced by the heating rate, activation temperature and internal-external conversions.