• Wind and Structures
• /
• v.29 no.3
• /
• pp.209-223
• /
• 2019

The assessment of wind-induced vibration for tall reinforced concrete (RC) buildings requires the accurate estimation of their dynamic properties, e.g., the fundamental vibration periods and damping ratios. In this study, RC frame-shear wall systems designed under gravity and wind loadings have been evaluated by utilising 3D FE modelling incorporating eigen-analysis to obtain the elastic periods of vibration. The conducted parameters consist of the number of storeys, the plan aspect ratio (AR) of buildings, the core dimensions, the space efficiency (SE), and the leasing depth (LD) between the internal central core and outer frames. This analysis provides a reliable basis for further investigating the effects of these parameters and establishing new formulas for predicting the fundamental vibration periods by using regression analyses on the obtained results. The proposed constrained numerically based formula for vibration periods of tall RC frame-shear wall office buildings in terms of the height of buildings reasonably agrees with some cited formulas for vibration period from design codes and standards. However, the same proposed formula has a high discrepancy with other cited formulas from the rest of design codes and standards. Also, the proposed formula agrees well with some cited experimentally based formulas.

• The Korean Journal of Archival Studies
• /
• no.79
• /
• pp.389-442
• /
• 2024

In order to establish a corporate records schedule, this study identifies the types of records and retention periods specified by domestic laws for companies to retain, reviews the significance and characteristics of the results, and proposes establishing a corporate records schedule. To this end, this study identified the company's management activities, prepared a record survey for legal analysis, and extracted the record types and retention periods necessary for the company's management activities through a review of various laws. Next, this study looked at the meaning and characteristics of the types of records and retention periods required by companies. Finally, based on the analysis results, a method for establishing a corporate record processing schedule was proposed.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.1002-1012
• /
• 2001

The work reported here is an extensive study of tendon response to multiple cyclic tests including 3% constant peak strain level test (A-type test), 3% constant peak strain level test with two rest periods (B-type test), and 3∼4% different peak strain level test (C-type test). A sufficient number of specimens were tested at each type of the test to statistically evaluate many changes in response during testing and differences in response between each type of the test. In cyclic tests, there were decreses (relaxations) in the peak stresses and hysteresis, increases in the slack strains, and during lower peak strain level (3%) cyclic block after higher peak strain level (4%) cyclic block in the C-type tests. Considering the results of this study and those of the other study of multiple cyclic tests with rest periods by Hubbard and Chun, 1985, recovery phenomena during the rest periods occurred predominantly at the beginning of the rest periods. Consistently in both studies, the effects of rest periods were small and transient compared to the effects of the cyclic extensions. The recovery with cycles at lower peak strain level (3%) after higher peak strain level (4%) in the C-type test has not been previously documented. This recovery seems to be a natural phenomena in tissue behavior so that collagenous structures recover during periods of decreased demand.

• The Journal of Fisheries Business Administration
• /
• v.51 no.4
• /
• pp.1-18
• /
• 2020

The paper aims to explore existence and degree of remaining fisheries damages after the completion of undertaking the Four Major Rivers Project focusing on the case of Yeongsan river. The paper seeks to show the necessity of consideration of periods of fishery resources recovery in the estimation of ex-post fisheries damages of the project by inferring the analysis of the annual variation of environmental indicators in the river. Therefore, the paper suggests three years of remaining periods of fisheries damages of the project utilizing the variation trend of ex-ante and ex-post annual output data of inland fisheries in Jeonnam province and individual catch of fisheries. In the measurement of the annual degree of fisheries damages during periods of fishery resources recovery, the paper attempts to suggest the method of comparision of day catch data per vessel between ex-ante and ex-post periods of the project, which were investigated by the same institute. Here the paper tries to make correction of ex-post catch data for holding the same catching condition as ex-ante situation by adopting the concept of competitive intensity of catching which was derived from the decreasing rate of number of fishing households in the area of Yeongsan river.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2018

In this study, natural period formular is presented for a RC shear wall structure with H-, T-, and L-shaped wall sections. The natural period formular proposed by Goel and Chopra and adopted in ASCE 7-10 was modified by using the ratio of the flange and web wall area. The natural periods of structures with H-shaped wall were numerically obtained, the results indicated that the ASCE 7-10 could not consider the natural period variation according to the length of the flange wall, but the proposed formula could do. Especially, ASCE 7-10 estimated much longer periods than eigenvalue analysis, and this implies that conservative seismic design is difficult. The periods by eigenvalue analysis exist between the upper and lower bounds given by the proposed formula, and conservative design is possible by using the proposed lower bound value. In order to verity the effectiveness of the proposed method, actual residential buildings with various types of flange walls are considered. Ambient vibration tests, eigenvalue analyses, and nonlinear dynamic analyses were conducted and the periods were compared with the values by ASCE 7-10 and the proposed formula. The results showed that the proposed formula could estimate more accurately the periods than ASCE 7-10.

• Atmosphere
• /
• v.29 no.5
• /
• pp.599-607
• /
• 2019

The change and periodicity of Korean winter temperature in the period 1979-2018 are investigated. It is shown that the winter temperature is on a long-term rise, with two regime shifts of winter temperature during 40 years. In addition, the decrease in cold days is confirmed along with the rise in temperature. Analysis of the periodicity of daily temperature in winter is carried out by means of power spectral analysis. Of the spectral peaks that are statistically significant, the most frequent detection exists on the time scale between 7 and 8 days. It is found that the number of significant periods have decreased since 2014, particularly no longer existent around the period of 7 day. The longer periods than 7 days gradually increase during 40 years, while the shorter periods show the tendency of decrease but recently rebound. Spectral analysis calculated from high/low-pass filtered daily temperature data also shows similar results.

• Journal of the Korean Society of Safety
• /
• v.25 no.4
• /
• pp.61-67
• /
• 2010

Though "Zero Accident Campaign" is a desirable campaign for industrial accident prevention and reducing victims, the number of industrial enterprises has been decreasing abruptly in recent years. One of the reasons for this phenomenon may be attributed to irrationality of 'target accident-free time periods' established by related organizations. This study was carried out to develop a new rational scheme for the campaign. Therefore, for a numerical basis, Poisson process was introduced, and problems induced by current target periods were analyzed mathematically one by one. As a result, it was verified that current target periods were uneven since the probability that manufacturing plants get them would be different form industry to industry. To develop countermeasures, a brand new method were suggested in this research. The first characteristic was that group classification should be based upon average accident rates resulted from past several years, and the second was that adjustment probability which can make the target acquisition probability even. About the suggested method, a questionnaire survey was conducted. To make a conclusion, most manufacturing plants agreed with the suggested method such high affirmative portion that the suggested method would be expected to help promote the campaign again.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.3
• /
• pp.138-144
• /
• 1987

This study was conducted to pursue the normalization of frequency distribution by making approach the coefficient of skewness to nearly zero tbrough SMEMAX transformation and to get probable minimum flows can be acquired by means of transforrnation equation which has been derivated by SMEMAX method to the annual minimum flow series of five watersheds along Geum river basin. The results obtained through SMEMAX method were compared with probable minimum flows according to return periods by Type III extremal distribution which has been determined as the best fitted one among probablility distributions for the analysis of minimum flow. All the results obtained through this study are summarized as follows. 1.SMEMAX transformation based on median value was proved to be the best method when the coefficient of skewness has less reliability because of the short duration for the observation and were not affected by accidental outliers. 2.SMEMAX transformation has found to be the best one for the coefficient of skewness to be made nearly zero in comparison with log and cubic root transformation. 3.Probable minimum flows according to the return periods were derivated by transformation equations obtained through theoretical analysis of SMEM AX transformation. 4.In general, probable minimum flows by SMEMAX method were appeared as higher values in the range of five and twenty years and as lower ones in the range of below than five and more than fifty years in return periods respectively, in comparison with the results of type III extremal distribution. 5.Relative errors in the probable minimum flows of SMEMAX method to the results of type III extremal distribution were shown to be within ten percent except those of one hundred years in return periods. 6.SMEMAX method was also confirmed to be useful for the analysis of minimum flow frequency as well as flood frequency analysis.

• KDI Journal of Economic Policy
• /
• v.24 no.1
• /
• pp.3-44
• /
• 2002

This study attempts to explain why traditionally pro-cyclical trade balance became counter-cyclical since early 1990's in Korea. Structural VAR analysis for two sub-periods reveals two interesting changes in the role of the supply shock. First, impulse response analysis shows that the conditional correlation between the supply shock and trade balance turned from positive to negative over the two sub-periods. Second, the relative importance of the supply shock increased over the sub-periods. These two factors together explain the change in the cyclical properties of trade balance over time. Underlying cause behind these changes is likely to be the trade and financial market liberalization since late 1980's.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.430-436
• /
• 1993

Due to the failure of the instrument and control devices of nuclear power plants caused by aging, nuclear power plants occasionally trip. Even a trip of a single nuclear power plant (NPP) causes an extravagant economical loss and deteriorates public acceptance of nuclear power plants. Therefore, the replacement of the instrument and control devices with proper consideration of the aging effect is necessary in order to prevent the inadvertent trip. In this paper we investigated the optimal replacement periods of the control computer's components of Wolsung nuclear power plant Unit 1. We first derived mathematical models for optimal replacement periods to the digital control computer's components of Wolsung NPP Unit 1 and calculated the optimal replacement periods analytically. We compared the periods with the replacement periods currently used at Wolsung NPP Unit 1. The periods used at Wolsung is not based on mathematical analysis, but on empirical knowledge. As a consequence, the optimal replacement periods analytically obtained and those used in the field show a little difference.