• 품질경영학회지
• /
• 제39권4호
• /
• pp.507-515
• /
• 2011

MIL-HDBK-217 has played a pivotal role in reliability prediction of electronic equipments for more than 30 years. Recently, RIAC developed a new methodology $217Plus^{TM}$which officially replaces MIL-HDBK-217. Sensitivity analysis of the 217Plus component models to various parameters has been performed and meaningful observations have been drawn in this study. We first briefly reviewed the $217Plus^{TM}$ methodolog and compared it with the conventional model, MIL-HDBK-217. We then performed sensitivity analysis $217Plus^{TM}$ component models to various parameters. Based on the six parameters and an orthogonal array selected, we have performed indepth analyses concerning parameter effects on the model. Our result indicates that, among various parameters, operating temperature and temperature rise during operation have the most significant impacts on the life of a component, and thus a design robust to high temperature is the most importantly required. Next, year of manufacture, duty cycle, and voltage stress are weaker but may be significant when they are in heavy load conditions. Although our study is restricted to a specific type of diodes, the results are still valid to other cases. The results in this study not only figure out the behavior of the predicted failure rate as a function of parameters but provide meaningful guidelines for practical applications.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.87-90
• /
• 2005

The drawbead is used to control the material flow into the die and increase the forming quality during the binder wrap process and the stamping process in the sheet metal forming. Drawbead restraining force (DBRF) is controlled by geometrical parameters and influenced by process parameters such as friction coefficient and blank thickness. In order to inspect the effect of process parameters, parameter studies are performed with the variation of parameters using finite element model of drawbead which is utilized reliably for the calculation of the drawbead restraining force. Drawbead analysis is carried out with 2-D plane-strain element and 3-D shell element. After the verification of the accuracy of the drawbead model with 3-D shell element, it is utilized to the prediction and the investigation of the effect of process parameters. The result of parameter studies can be utilized to the die design in the tryout stage.

• 한국재료학회지
• /
• 제25권7호
• /
• pp.322-329
• /
• 2015

The magnitude of wear should be at a minimum for numerous automobile and aeronautical components. In the current work, composites were prepared by varying the cenosphere content using the conventional stir casting method. A uniform distribution of particles was ensured with the help of scanning electron microscopy (SEM). Three major parameters were chosen from various factors that affect the wear. A wear test was conducted with a pin-on-disc apparatus; the controlling parameters were volume percentages of reinforcement of 5, 10, 15, and 20%, applied loads of 9.8, 29.42, and 49.03 N, and sliding speeds of 1.26, 2.51, and 3.77 m/s. The design of the experiments (DOE) was performed by varying the different influencing parameters using the full factorial method. An analysis of variance (ANOVA) was used to analyze the effects of the parameters on the wear rate. Using regression analysis, a response curve was obtained based on the experimental results. The parameters in the resulting curve were optimized using the Genetic Algorithm (GA). The GA results were compared with those of an alternate efficient algorithm called Neural Networks (NNs).

• Journal of Periodontal and Implant Science
• /
• 제42권6호
• /
• pp.237-242
• /
• 2012

Purpose: The aim of this study was to clinically and radiographically evaluate and compare treatment of intrabony defects with the use of decalcified freeze-dried bone allograft in combination with a calcium sulphate barrier to collagen membrane. Methods: Twelve patients having chronic periodontal disease aged 20 to 50 years and with a probing depth >6 mm were selected. Classification of patient defects into experimental and control groups was made randomly. In the test group, a calcium sulphate barrier membrane, and in control group, a collagen membrane, was used in conjunction with decalcified freeze-dried bone graft in both sides. Ancillary parameters as well as soft tissue parameters along with radiographs were taken at baseline and after 6 months of surgery. Parameters assessed were plaque index, modified gingival index, probing depth, relative attachment level, and location of the gingival margin. A Student's t-test was done for intragroup and a paired t-test for intergroup analysis. Results: Intragroup analysis revealed statistically significant improvement in all the ancillary parameters and soft tissue parameters with no statistically significant difference in intergroup analysis. Conclusions: The study concluded that a calcium sulphate barrier was comparable to collagen membrane in achieving clinical benefits and hence it can be used as an economical alternative to collagen membrane.

• 한국지반신소재학회논문집
• /
• 제6권1호
• /
• pp.39-43
• /
• 2007

열융착법을 이용하여 보강과 배수기능을 가진 니들펀치 및 스펀본딩 부직포의 지오컴포지트를 제조하였다. 이 다층 부직포의 물성(인장, 인열 및 파영강도, 투수도 등)은 열융착법을 사용하여 제조될 경우 온도, 압력, 접착시간 등의 공정인자에 좌우된다. 따라서, 열융착법으로 제조된 지오컴포지트의 공정인자와 물성의 최적화는 매우 중요하다. 본 연구에서는 인공신경망(ANN)을 사용하여 지오컴포지트의 제조공정 최적화를 위한 알고리즘이 개발되었다. 지오컴포지트의 공정인자를 변화시켜 부직포 성능변화를 예측하기 위한 신경망 모사가 적용되었으며, 분석결과에 대한 제조방법의 효과를 조사하였다.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.790-802
• /
• 2022

Large-scale reactor simulation often requires the use of Monte Carlo calculation techniques to estimate important reactor parameters. One drawback of these Monte Carlo calculation techniques is they inevitably result in some uncertainty in calculated quantities. The present study includes parametric uncertainty quantification (UQ) and sensitivity analysis (SA) on the Advanced Test Reactor Critical (ATRC) facility housed at Idaho National Laboratory (INL) and addresses some complications due to Monte Carlo uncertainty when performing these analyses. This approach for UQ/SA includes consideration of Monte Carlo code uncertainty in computed sensitivities, consideration of uncertainty from directly measured parameters and a comparison of results obtained from brute-force Monte Carlo UQ versus UQ obtained from a surrogate model. These methodologies are applied to the uncertainty and sensitivity of k_eff for two sets of uncertain parameters involving fuel plate geometry and fuel plate composition. Results indicate that the less computationally-expensive method for uncertainty quantification involving a linear surrogate model provides accurate estimations for k_eff uncertainty and the Monte Carlo uncertainty in calculated k_eff values can have a large effect on computed linear model parameters for parameters with low influence on k_eff.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.159-181
• /
• 2024

In the present study, the effect of geometrical parameters of two different types of aluminum thin-walled structures on energy absorption under three-bending impact loading has been investigated experimentally and numerically. To evaluate the effect of parameters on the specific energy absorption (SEA), initial peak crushing force (IPCF), and the maximum crushing distance (δ), a design of experiment technique (DOE) with response surface method (RSM) was applied. Four different thin-walled structures have been tested under the low-velocity impact, and then they have simulated by ABAQUS software. An acceptable consistency between the numerical and experimental results was obtained. In this study, statistical analysis has been performed on various parameters of three different types of tubes. In the first and the second statistical analysis, the dimensional parameters of the cross-section, the number of holes, and the dimensional parameter of holes were considered as the design variables. The diameter reduction rate and the number of sections with different diameters are related to the third statistical analysis. All design points of the statistical method have been simulated by the finite element package, ABAQUS/Explicit. The final result shows that the height and thickness of tubes were more effective than other geometrical parameters, and despite the fact that the deformations of the cylindrical tubes were around forty percent greater than the rectangular tubes, the top desirability was relevant to the cylindrical tubes with reduced cross-sections.

• 대한후두음성언어의학회지
• /
• 제32권2호
• /
• pp.87-93
• /
• 2021

There are a number of voice analysis programs around the world. Domestic voice analysis is performed by relying heavily on specific commercial program. We intend to develop coding for voice analysis using Praat and apply it to clinical practice. This study consisted of Experiment 1 and Experiment 2. Experiment 1 was the development of automated voice analysis coding based on Praat. The coding was largely divided into a recording, an analysis, and a storage section. Experiment 2 was applied to the voice analysis of 2 male patients pre- and post-operation with this coding. The analysis parameters of this coding provided 26 parameters for vowel /a/, nine parameters for sentence analysis, and a total of 4 parameters for voice range profile analysis. In two male patients, the pitch and the intensity increased, the voice quality improved, and the sentence length decreased after surgery. The coding was well made, so the output was good in real time. The code is automated as much as possible to block manual errors and increases convenience and efficiency by generating the result sheet in real time.

• Earthquakes and Structures
• /
• 제19권5호
• /
• pp.395-409
• /
• 2020

With verifications through many relevant researches in the past few decades, adopting the equivalent lateral force procedure for designing seismically isolated structures as a preliminary or even final design approach has become considerably mature and publicly acceptable, especially for seismic isolation systems that mechanically exhibit bilinear hysteretic behavior. During the design procedure, in addition to a given seismic demand, structural designers still need to previously determine three parameters, such as mechanical properties of seismic isolation systems or design parameters and performance indices of seismically isolated structures. However, an arbitrary or improper selection of given parameters might cause diverse or even unacceptable design results, thus troubling structural designers very much. In this study, first, based on the criterion that at least either two design parameters or two performance indices of seismically isolated structures are decided previously, the rationality and applicability of design results obtained from different conditions are examined. Moreover, to consider variations of design parameters of seismically isolated structures attributed to uncertainties of mechanical properties of seismic isolation systems, one of the conditions is adopted to perform bounding analysis for seismic isolation design. The analysis results indicate that with a reasonable equivalent damping ratio designed, considering a specific variation for two design parameters (the effective stiffness and equivalent damping ratio) could present more conservative bounding design results (in terms of isolation displacement and acceleration transmissibility) than considering the same variation but for two mechanical properties (the characteristic strength and post-yield stiffness).

• Imaging Science in Dentistry
• /
• 제37권1호
• /
• pp.53-59
• /
• 2007

Purpose : Bone mineral density (BMD) and bone microarchitecture are important determinants for bone strength. Recently micro-CT have provided possibilities for measuring a variety of structural indices to characterize bone microarchitecture. The objective of this study was to compare the BMD and micro-CT parameters with Young's modulus calculated by finite element analysis (FEA) for the evaluation of bone strength. Materials and Methods Bone specimens were obtained from the 18 female rabbits aged 16 weeks. Of those, 36 samples (right and left femur) were selected for 3D micro-CT analysis $(ANT^{TM},\;SKYSCAN,\;Belgium)$ and BMD by PIXlmus 2 (GE Lunar Co. USA). Five microstructural parameters of micro-CT, such as trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DOA) were studied. Young's modulus was obtained by software program (ANSYS 9.0, ANSYS Inc, Canonsburg, PA) based on micro-CT three dimensional images. Results : Young's modulus assessed by FEA correlated significantly with Tb.Th, BV/TV, BS/BV and SMI respectively. Young's modulus showed higher correlation with these rnicrostructural parameters of micro-CT than BMD. Microstructural parameters except DOA showed significant correlations within the examined group. Conclusion The microarchitectural parameters o( micro-CT and BMD represented some informations in the evaluation of bone strength assessed by FEA.