• Clinical and Experimental Pediatrics
• /
• v.50 no.5
• /
• pp.443-448
• /
• 2007

Purpose : To evaluate the potential prognostic value of the antithrombin-III (AT-III) level in the children with acute lung injury (ALI), we analyzed several early predictive factors of death including AT-III level at the onset of ALI and compared the relative risk of them for mortality. Methods : Over a 18-month period, a total of 198 children were admitted to our pediatric intensive care unit and 21 mechanically ventilated patients met ALI criteria, as defined by American-European consensus conference, i.e., bilateral pulmonary infiltrates and $PaO_2/FiO_2$ lower than 300 without left atrial hypertension. Demographic variables, hemodynamic and respiratory parameters, underlying diseases, as well as Pediatric Risk of Mortality-III (PRISM-III) scores and Lung Injury Score (LIS) at admission were collected. AT-III levels were measured within 3 hours after admission. These variables were compared between survivors and non-survivors and entered into a multiple logistic regression analysis to evaluate their independent prognostic roles. Results : The overall mortality rate was 38.1% (8/21). Non-survivors showed lower age, lower lung compliance, higher PEEP, higher oxygenation index (OI), lower arterial pH, lower $PaO_2/FiO_2$, higher PRISM-III score and LIS, and lower AT-III level. PRISM-III score, LIS, OI and decreased AT-III level (less than 70%) were independently associated with a risk of death and the odds ratio of decreased AT-III level for mortality is 2.75 (95% confidence interval; 1.28-4.12) Conclusion : These results suggest that the decreased level of AT-III is an important prognostic factor in children with ALI and the replacement of AT-III may be considered as an early therapeutic trial.

• Journal of Life Science
• /
• v.30 no.6
• /
• pp.555-562
• /
• 2020

This study analyzed the total polyphenol (TP), total flavonoid (TF), and protein content, the Absorbance at 400 nm (A400), and the antioxidant and hemolytic activities of 150 Korean honey products, including 41 chestnut (CH), 42 acacia (AH), 62 multi-floral (MH), and five Styrax japonica (TH) varieties. Our results showed that the components and antioxidant activities of honey are dependent on botanical origin rather than farming area or farmer. CH showed the highest levels of TP (88.6±29.8 mg/100 g) and TF (1.20±0.82 mg/100 g), whereas TH had the highest protein (21.5±5.1 mg/100 g). A400 was the highest in CH (0.161±0.044). All of the honey products exhibited negligible hemolytic activity against human red blood cells up to 1 mg/ml. Potent radical scavenging activities for 1,1-diphenyl-2-picryl hydrazyl (DPPH), 2,2-azobis(3-ethylbenzothiazoline-6- sulfonate) (ABTS), nitrite and reducing power were also observed in CH. Correlation coefficients (CCs) between analysis parameters were calculated and the highest was identified between TP and ABTS scavenging activity (0.726). The CCs between A400 and TP and A400 and ABTS scavenging activity were 0.644 and 0.661, respectively, suggesting that A400 could be used as a quality indicator for the polyphenol content and antioxidant activity of particular honeys. Future research on polyphenol by flower origin and the identification of compounds for A400 is necessary.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.118-128
• /
• 1996

The lattice parameters of stoichiometric $UO_2$ and $U_{1-y}Er_{y}O_2$ in the range of y=0.01 to y =0.33 were determined with use of X-ray diffraction data. Oxygen potentials have been measured by means of a thermogravimetric method in the range of 1200~$1500^{\circ}C$ and $10^{-14}$ $\leq$ $Po_2$ $\leq$ $10^{-3}$ for pure $UO_2$ and $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions with y=0.02, y=0.06 and y=0.20, respectively. Their oxygen partial pressures were maintained by controlling $CO_2$/CO mixture atmosphere, and the $Po_2$ values corresponding to x of $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions were measured with an electrolyte oxygen sensor. The lattice parameter decreases linearly with an increase in the erbium content. The change of the lattice parameter can be expressed in a linear equation of y as a($\AA$) =5.4695-0.220y for 0 $\leq$y$\leq$0.33. The experimental coefficient of y -0.220 in $U_{1-y}Er_{y}O_2$ was an intermediate value between the calculated values -0.273 and -0.156 in the case of $U^{5+}$ and $U^{6+}$, respectively. The (equation omitted) has been found to undergo abrupt increase in the range of -360 to -270 kJ/mole for y=0.06 and -320 to -220 H/mole for y=0.20, respectively, in the temperature range of 1200-$1500^{\circ}C$. (equation omitted) increases with erbium content, but the effect of the dopant for x =0.01 is less significant than that for stoichiometry. The oxygen potentials for $UO_2$ and $U_{0.98}Er_{0.02}O_{2+x}$ can be approximately represented by the $U^{5+}$/$U^{4+}$ model but those for y$\geq$ 0.06 in $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions cannot be interpreted by the mean uranium valence model.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.749-756
• /
• 2019

Na-X and Na-A zeolites that give high adsorption capacity for heavy metals in an aqueous system were synthesized from the coal fly ash obtained from a thermoelectric power plant using a fusion method. The characteristics and Cu(II) adsorption capacity of the synthetic zeolites were also compared to those of using a commercial zeolite. For the selection of optimum conditions of zeolite synthesis, the effects of major parameters in the fusion method such as a dosage ratio of NaOH, aging time, hydrothermal reaction time, and also the dosage ratio of NaAlO₂ (Na-A) on the characteristics and Cu(II) adsorption capacity of the synthetic zeolites were studied. For the analysis of characteristics of the synthetic zeolites, X-ray diffraction (XRD), cation exchange capacity (CEC), Brunaue-Emmett-Teller (BET) and scanning electron microscopy (SEM) were used. The optimum conditions for the synthesis of zeolites with a high adsorption capacity for cationic heavy metals including Cu(II) were the aging time of 6 h, hydrothermal reaction time of 6 h and NaOH and NaAlO₂ dosage ratio of 1.5 and 0.5 (Na-A), respectively. According to the Langmuir isotherm test, maximum Cu(II) adsorption capacities of the synthetic and commercial Na-X and Na-A zeolites were found to be 90.1, 105.26, 102.05, and 109.89 mg/g, respectively. This indicates that the adsorption capacity of synthetic zeolites was comparable to commercial ones. The results of this study also suggest that the coal fly ash can be potentially used as a raw material for the zeolite synthesis.

• Korean Journal of Poultry Science
• /
• v.18 no.1
• /
• pp.1-8
• /
• 1991

This study was conducted to estimate heritabilities and genetic correlations on body shape components in Korean Native Ogol fowl , The data analysis were record of 450 pullets producted from 150 dams and 20 sires of Korean Native Ogol fowl raised at Chungnam National University from June 18, 1987 to April 6, 1989. The results obtained are sammarized as follows ； 1. On the body components, shank length at 8, 24 weeks and 300 days of age were $8.717\pm$0.363, $9.576\pm$0.390 and $9.646\pm$0.389cm, the breast width were 3.469$\pm$0.234, $4.310\pm$0.345 and $4.752\pm$0.343cm； the breast girth at 8, 24weeks and 300 days of age were $22.819\pm$1.082, $36.719\pm$1.793 and $39.008\pm$1.709cm； the tibia length at 8, 24weeks and 300days of age were $9.941\pm$0.888, $13.183\pm$0.499 and $13.560\pm$0.552cm. 2. The heritability estimates of body shape components based on the variances of sires, dams and combined components from 8, 24 weeks and 300 days of age were 0.235-0.290, 0.589-0.890 and 0.437-0.565 for shank length ； 0.185-0.237, 0.444-0.536 and 0.314-0.392 for breast width ； 0.218-0.552, 0.499-0.746, 0.486-0.558 for breast girth ； 0.339-0.432, 0.281-0.543 and 0.340-0.446 for tibia length, respectively. 3. The genetic correlation coefficient of body shape components were as follows ； between shank length and breast width, breast girth, tibia length were 0.237-0.836, 0.277-0,729 and 0.378-0.915；between breast width and breast girth, tibia length were 0.637-0.889 and 0.384-0.903；between breast girth and tibia length was 0.905-0.995, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.122-126
• /
• 2010

Purpose: F-18-FPCIT that shows strong familiarity with DAT located at a neural terminal site offers diagnostic information about DAT density state in the region of the striatum especially Parkinson's disease. In this study, we altered the iteration and subset and measured SUV${\pm}$SD and Contrasts from phantom images which set up to specific iteration and subset. So, we are going to suggest the appropriate range of the iteration and subset. Materials and Methods: This study has been performed with 10 normal volunteers who don't have any history of Parkinson's disease or cerebral disease and Flangeless Esser PET Phantom from Data Spectrum Corporation. $5.3{\pm}0.2$ mCi of F-18-FPCIT was injected to the normal group and PET Phantom was assembled by ACR PET Phantom Instructions and it's actual ratio between hot spheres and background was 2.35 to 1. Brain and Phantom images were acquired after 3 hours from the time of the injection and images were acquired for ten minutes. Basically, SIEMENS Bio graph 40 True-point was used and True-X method was applied for image reconstruction method. The iteration and Subset were set to 2 iterations, 8 subsets, 3 iterations, 16 subsets, 6 iterations, 16 subsets, 8 iterations, 16 subsets and 8 iterations, 21 subsets respectively. To measure SUVs on the brain images, ROIs were drawn on the right Putamen. Also, Coefficient of variance (CV) was calculated to indicate the uniformity at each iteration and subset combinations. On the phantom study, we measured the actual ratio between hot spheres and back ground at each combinations. Same size's ROIs were drawn on the same slide and location. Results: Mean SUVs were 10.60, 12.83, 13.87, 13.98 and 13.5 at each combination. The range of fluctuation by sets were 22.36%, 10.34%, 1.1%, and 4.8% respectively. The range of fluctuation of mean SUV was lowest between 6 iterations 16 subsets and 8 iterations 16 subsets. CV showed 9.07%, 11.46%, 13.56%, 14.91% and 19.47% respectively. This means that the numerical value of the iteration and subset gets higher the image's uniformity gets worse. The range of fluctuation of CV by sets were 2.39, 2.1, 1.35, and 4.56. The range of fluctuation of uniformity was lowest between 6 iterations, 16 subsets and 8 iterations, 16 subsets. In the contrast test, it showed 1.92:1, 2.12:1, 2.10:1, 2.13:1 and 2.11:1 at each iteration and subset combinations. A Setting of 8 iterations and 16 subsets reappeared most close ratio between hot spheres and background. Conclusion: Findings on this study, SUVs and uniformity might be calculated differently caused by variable reconstruction parameters like filter or FWHM. Mean SUV and uniformity showed the lowest range of fluctuation at 6 iterations 16 subsets and 8 iterations 16 subsets. Also, 8 iterations 16 subsets showed the nearest hot sphere to background ratio compared with others. But it can not be concluded that only 6 iterations 16 subsets and 8 iterations 16 subsets can make right images for the clinical diagnosis. There might be more factors that can make better images. For more exact clinical diagnosis through the quantitative analysis of DAT density in the region of striatum we need to secure healthy people's quantitative values.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• Journal of Chest Surgery
• /
• v.43 no.3
• /
• pp.285-291
• /
• 2010

Background: Thoracic trauma is one of the leading causes of morbidity and mortality in developing countries. A rib fracture that is secondary to blunt thoracic trauma is an important indicator of the severity of the trauma. The purpose of study was to determine the morbidity and mortality rates and the management of rib fractures. Material and Method: We performed a retrospective study that involved all the blunt trauma patients with rib fractures, excluding those that were transferred to other hospital within 3 days, that were seen at our hospital between May 2002 and December 2008. Of the 474 admitted patients, 454 met the inclusion criteria. There were 356 male and 98 females, and their overall mean age was 53 years (range: 5~90 years). The outcome parameters included the mechanism of injury, the number of fractured ribs, the length of stay in the ICU, the Injury Severity Score (ISS), the length of the hospital stay, the pulmonary complications and the mortality. Result: The mechanism of trauma included traffic accidents in 189 (41.7%) cases, slipping down in 103 (22.7%) cases, falls in 85 (18.7%) cases, cultivator accidents in 30 (6.6%) cases, industrial accidents in 32 (7.0%) cases and assault in 15 (3.3%) cases. Intrathoracic injury was noted such as hemothorax in 269 (59.3%) cases, pneumothorax in 144 (31.7%) cases, pulmonary contusion in 95 (20.9%) cases, subcutaneous emphysema in 29 (6.4%) cases and great vessel injury in 5 (0.1%) cases. Conservative treatment was administered to most of the patients. Tube thoracostomy was administered in 234 (51.5%) cases, whereas thoracotomy was performed in 18 (4.0%) cases. The mean duration of thoracostomy was $5.2{\pm}6.2$ days. Most of the cases with rib fracture were treated in wards and their mean duration of hospital stay was $22.5{\pm}20$ days. The mean Injury Severity Score (ISS) was $14.8{\pm}10.9$ (range: 3~75). The mortality rate was calculated to be 4.8% (n=22). The main factors correlated with an adverse outcome were the number of ribs fractured, the duration of thoracostomy and pulmonary disease. Industrial insurance affected the length of hospitalization. Pulmonary contusion and the Injury Severity Score (ISS) affected the mortality. Conclusion: Rib fractures are a indicator of severe injury. Because of the complication and associated injuries, we believe these patients should be admitted for evaluation and treatment. Recent studies on the impact of rib fractures after blunt trauma have shown that patients as young as 40 years of age demonstrate increased morbidity and mortality with similar injuries as compared to that of older patients. The ISS and pulmonary contusion influenced the mortality rate. Patients with isolated rib fractures should be hospitalized if the number of fractured ribs is one or more.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.24-32
• /
• 2005

Changes in apple slices during cold storage were investigated by evaluating the physical properties such as degree of browning and compression force. Chemical properties such as PPO activity and total phenol contents were also determined and sensory evaluation was carried out. The correlation analysis between browning parameters was conducted. Degree of browning was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. PPO activity was increased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP(caramelization product) from sucrose-dipped apple slice. Amongst several treatments, CP from sucrose-dipped apple slice showed the lowest degree of browning and PPO activity. Total phenol contents were decreased from 60 to 56.2 mg and from 59.6 to 56.0 mg in fresh apple slice and water-dipped apple slice, respectively, but CP from sucrose-dipped apple slice and $0.5\%$ ascorbic acid solution-dipped apple slice were increased from 51.9 to 52.8 mg and from 54.1 to 54.4 mg, respectively, showing the smallest changes when compared with fresh apple slice and water-dipped apple slice. Compression forces of apple slices during cold storage were decreased in the order of fresh apple slice, water-dipped apple slice, $0.5\%$ ascorbic acid solution-dipped apple slice and CP from sucrose-dipped apple slice. In sensory evaluation of apple slices during cold storage, CP from sucrose-dipped apple slice had higher score than the other treatments. In addition, a significant correlation was observed among degree of browning, PPO activity and phenol content. Therefore, CP from sucrose-dipped apple slice seems to be effective in controlling of enzymatic browning during cold storage. In addition, CP from sucrose-dipped apple slice seems to be effective on other several factors. These results suggest that CP from sucrose should be a potential source for controlling enzymatic browning during storage of vegetables and fruits.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.921-927
• /
• 2011

To compare pork quality from different pig species domesticated for Korean consumers, the meat quality characteristics of 5 different pure breeds of Landrace (L), Yorkshire (Y), Duroc (D), Berkshire (B), and Chester White (C) were determined from the 3 parts of loins, butts, and bellies. The fat content of loins was higher in breed D than in the other breeds, while that of butts and bellies was higher in breed B. The CIE color $a^*$ and $b^*$ values of the loins and butts from breed C were lower than those of the other breeds, but the color values of the belly part did not significantly differ by breed due to the high fat accumulation. The drip loss and cooking loss significantly differed depending on meat parts: breeds D and B were inferior in loins and butts but superior in bellies. The lipid oxidation of raw meat did not increase during the 7 d storage. The cooked butts of breed C had less thiobarbituric acid-reactive substances values than those of the other breeds at 7 d, and the cooked bellies of breeds D and B had less. Moreover, there were only minimal differences in fatty acid compositions by pork breed and part. From the view points of the physicochemical and organoleptic analysis of pork from different pig species, it is estimated that breed D had better meat quality in the loin part and breed B had better meat quality in the butt. The belly meat quality of breed C showed the least value. Although the meat quality of pig species differed depending on the parts and it was difficult to compare the meat quality of a part using the meat quality parameters of another part, the result of this study could provide basic information that can be used to improve the meat quality of different parts of pig species.