• International Journal of Highway Engineering
• /
• v.19 no.3
• /
• pp.71-81
• /
• 2017

PURPOSES : In this study, the effects of installation of diagonal crosswalks on traffic flow depending on the types of intersections are analyzed. METHODS : Scrambled crosswalks have advantages in the traffic safety. Therefore, a comparative analysis of the overall average delay before and after installation of the scrambled crosswalk was conducted using VISSIM. RESULTS : The overall average delay for the scrambled crosswalk decreased when the traffic volume ratio of the major to the minor street is 1: 6 in 2-by-1 and 3-by-1 types of intersections. The scrambled crosswalk improved efficiency of traffic operation in intersections: higher traffic volume for a major street, lower traffic volume for a minor street, and longer cross-distance for a major street. CONCLUSIONS:This study can be used to determine when a scrambled crosswalk should be installed to improve operational efficiency.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.109-119
• /
• 2014

PURPOSES : The control delay in seconds per vehicle is the most important traffic operational index to evaluate the level of service of signalized intersections. Thus, it is very critical to calculate accurate control delay because it is used as a basic quantitative evidence for decision makings regarding to investments on traffic facilities. The control delay consists of time-in-queue delay, acceleration delay, and deceleration delay so that it is technically difficult to directly measure it from fields. Thus, diverse analysis tools, including CORSIM, SYNCHRO, T7F, VISTRO, etc. have been utilized so far. However, each analysis tool may use a unique methodology in calculating control delays. Therefore, the estimated values of control delays may be different by the selection of an analysis tool, which has provided difficulties to traffic engineers in making solid judgments. METHODS : This study was initiated to verify the feasibility of diverse analysis tools, including HCM methodology, CORSIM, SYNCHRO, T7F, VISTRO, in calculating control delays by comparing estimated control delays with that measured from a field. RESULTS : As a result, the selected tools produced quite different values of control delay. In addition, the control delay value estimated using a calibrated CORSIM model was closest to that measured from the field. CONCLUSIONS : First, through the in-depth experiment, it was explicitly verified that the estimated values of control delay may depend on the selection of an analysis tool. Second, among the diverse tools, the value of control delay estimated using the calibrated microscopic traffic simulation model was most close to that measured from the field. Conclusively, analysts should take into account the variability of control delay values according to the selection of a tool in the case of signalized intersection analysis.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.199-206
• /
• 2009

In relation with economical efficiency analysis on investment evaluation of transportation system, among vehicle operating cost saving benefit that is applied to general preliminary assessment guidelines and investment evaluation guidelines, oil expense calculated data which concentrated and analyze on the relationship between oil consumption amount on running state and running speed. For uninterrupted flow which does not have stopped delay due to traffic signal, consideration for reduction benefit is possible due to the changes of running speed and travel time however, for interrupted flow which the stopping occurs due to signal control on actual signal intersection has no consideration for stopping delay time reduction and stopping rate improvement thus reflection of reality on improved effect analysis is difficult. Therefore, this research makes a framework to analyze benefits that reflects the features of signalized intersections by benefits associated with decrease of stopping delay time with existing research and developing vehicle operating cost calculation model formula. Vehicle operating cost has been redefined considering the stopping delay time by applying the oil consumption amount at idling and the economical benefit between conventional model and newly developed model when applied for the optimization of traffic signal system on the two roads in Seosan city has been analyzed comparative. While the importance of traffic system maintenance is being emphasized due to the increase of congested areas on roads, it is expected to assist in more realistic economical analysis which reflect the delay improvement through the presentation of an economic analysis model that considers the features of signalized intersections in signal optimization system improvements and effect analysis of congestion improvement projects`.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.31-40
• /
• 2003

Unsignalized intersections are classified into two-way-stop-controlled(TWSC) and all-way-stop-controlled(AWSC) intersections for the analysis of capacity and level of service. There is no AWSC intersection in Korea, but non-controlled intersections are common. Non-controlled intersections are operated only by the driver's decision without any control. However, the study for the analysis of capacity and level of service of the non-controlled intersection has been rare. As the first stage research, this study aims to determine the measure-of-effectiveness (MOE) for the performance evaluation of non-controlled intersections. The relationships between traffic volume and the intersection passing time (delay) and number of conflicts on each intersection are analyzed. It was found that the number of conflicts were more sensitive to the traffic volume compared with the delay. It means that number of conflicts can be the MOE for the performance of non-controlled intersection. The analysis of the number of conflicts and traffic volume showed a linear relationship, so that traffic volume can also be an MOE. The level of service of non-controlled intersection can be determined with either of the MOE's. Since the performance is also influenced by the ratio of traffic volumes of crossing streets, the traffic volume should be adjusted by the ratio. The capacity of non-controlled intersection was suggested to be 2,000veh/hr referring that of AWSC intersection in the USHCM. The criteria was suggested by evenly dividing the traffic volumes based on the capacity.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.125-152
• /
• 1995

The purposes of this study are twofold ; (1) to investigate the accuracy of estimation power of the individual models. such as those of Highway Capacity Nanual (HCM), Korea Highway Capacity Manual (KHCM), and NationalCooperative Highway Research Program(NCHRP) Report339 ; and (2) to develop an adjusted delay model which can be applied to the signal control system in urban areas. The study is mainly focused on four subjects related to the research purposes, which are as follows ; (1) characteristecs of exsisting delay models ; (2) inherent problems in exsisting delay models : (3) validation of the proposed model by the comparison of observed delay with estimated delay :and (4) a method which can be applied to develop an appropriate delay model for actrual signal control systems by the adjusted fact of the proposed model.

• Journal of Korean Society of Transportation
• /
• v.12 no.2
• /
• pp.47-63
• /
• 1994

The purposes of this study are to identify Traffic Flow characteristics and to develop approach delay model of unsignalized intersection based on the travel speed in the conflicting area. The results of this study are as following ; 1. The cumulative frequency distributions of Left-turning speed show a few differences among approaches and they are distributed to lower range of speeds. On the other hand, those of through speed show obvious differences among bounds. The similar results also show in the analysis of Percentile speed. 2. The effectiveness of conflicting movements to travel speed in the conflicting area are analyzed using regression analysis. Left-turning speed model shows that Left-and Right-Conflicting speed. Through-speed model is also developed, when approaching through volume is less than 420vph. 3. Since the lost time due to the acceleration stop, and decelerlation is occured in the conflicting area, approach delay model is delivered using the travel speed models under the condition of small queuing delay.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.563-570
• /
• 2009

This study is aimed to analyze the overall effects of the additional delay caused by the vehicle in front of the queue, at the signal, to the total delay estimation. To estimate the average vehicle delay at the signalized intersection, as survey of the queue length at the intersection and traffic counts were conducted. As a result of this analysis, all of the three delay estimation methods turned out to be similar in that the estimation of the average delay for the test vehicle was less than 60 sec/vehicle. However, the average delay time for the vehicle in front of the queue only, was estimated at 60-70 sec/vehicle which is similar to the average delay of the test vehicle.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.79-89
• /
• 2011

Though many studies regarding roundabout have been recently conducted, most of them have focused on operational aspect. Moreover, majority of the previous researches analyzes operational effects of single roundabout, but seldom investigate the effects of multi-roundabouts constructed on road networks. In this study, we seek ways to construct multiple roundabouts on road network maximizing their operational effects. The analysis investigate influence of both adjacent signalized and unsignalized intersections as well as influence of the distance from those intersections to roundabouts. The results show that the optimal distance between two adjacent intersections were calculated to be 150m, and any two intersections located within 150m apart influence each other thus imposing operational restrictions on each other. In addition, those results are confirmed using simulation analysis conducted on the real urban network in Nonheon regional area, Incheon City.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.161-172
• /
• 2008

The level of service (LOS) evaluation method of the Highway Capacity Manual (HCM) is limited to intersections with pre-timed signal operation, while advanced real-time traffic control systems have been expending in the field. This paper proposes a preliminary framework for LOS analysis at isolated intersections controlled by COSMOS, the real-time traffic control systems robustly utilizing the degree of saturation as basic inputs. The proposed LOS evaluation framework was devised with a pilot model developed to estimate the average cycle length and green times of COSMOS. The validation test showed that the proposed framework was able to accurately project the LOS, which was separately evaluated based upon field data.