• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.733-736
• /
• 2009

Power Line Communication(PLC) is need not additional communication line. So establishment expense is inexpensive and application is simple. Therefore, lower part network of various application field is possible. However, there are high subordinate interference and noise problem on limited transmission data and communication interference element. Wireless Sensor Network(WSN) is need not infrastructure, Self-regulating network architecture of sensor nodes is possible. So at short time, network construction is available. But, power consumption is increased by active sensing for QoS elevation and unnecessary information transmission, low electric power design and necessity of improve protocol are refered to life shortening problem and is studied. In this paper, supplement problem of power line communication and wireless sensor network mutually and because advantage becomes linkage integration control system using synergy effect of two technologies as more restriction be and tries to approach structurally control network that is improved for smooth network environment construction. Honeywell's hybrid sensor network does comparative analysis(benchmarking). Confirm performance elevation proposing teaming of power line communication and wireless sensor network. Through simulation, service delay decreases and confirms that performance elevation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.271-278
• /
• 2019

The corrosion of reinforcements embedded in concrete causes severe deterioration in reinforced concrete structures. As a countermeasure, epoxy coated reinforcements are used to prevent corrosion of reinforcements. When epoxy coated bars are used, the resistance of corrosion is excellent, but epoxy coating on the bars have a disadvantage of reduction in bond capacity comparing to that of normal bars. Therefore, it is necessary to confirm the bond performance of epoxy coated reinforcements through experimental and analytical methods. Bond behaviors of epoxy coated bars for various diameters of 13 and 19mm and thicknesses of cover concrete of 3 types(ratio of cover to bar diameter) are examined. As the diameters of the epoxy coated bars increase, the difference of bond strength between epoxy coated and uncoated bars also increases and damage patterns showed pull out failure. In addition, finite element analysis was performed based on the bond-slip relationship obtained by direct pullout test and compared with the flexural test results. It is considered that flexural member test is more useful than pullout test for simulating the behavior of actual structure.

• Journal of Korea Port Economic Association
• /
• v.32 no.1
• /
• pp.151-163
• /
• 2016

This research analyzes the effect of the competitive edge in Information Communication Technology (ICT) on supply chain integration in business processes through a comparative analysis by industry that suggests a way of achieving competitive edge in ICT for effective supply chain integration. Based on the theoretical background, there are two research hypotheses. The first hypothesis is about the effect of a competitive edge in ICT on the supply chain. The second is that the effect of the competitive edge on supply chain integration varies from industry to industry. ICT infrastructure must be acquired in advance in order to attain a competitive edge in ICT to secure corporate competitiveness. Building a competitive edge in ICT itself by methods such as introduction, integration, and application, can directly improve company results. Therefore, it must be utilized strategically for improvement in standards of supply chain integration like information integration, organization integration, and strategy integration. If supply chain integration is accomplished effectively by gaining competitive edge in ICT, company results can be improved. By analyzing the effect of a company's competitive edge in ICT on supply chain integration, and comparing differences in features of each category of businesses, measures for developing a competitive edge in ICT and therefore supply chain integration are presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.533-541
• /
• 2021

Retaining walls have been used to prevent slope failure through resistance of earth pressure in railway, road, nuclear power plant, dam, and river infrastructure. To calculate dynamic earth pressure and determine the characteristics for seismic behavior, many researchers have analyzed the nonlinear response of ground and structure based on various numerical analyses (FLAC, PLAXIS, ABAQUS etc). In addition, seismic fragility evaluation is performed to ensure safety against earthquakes for structures. In this study, we used the FLAC2D program to understand the seismic response of the inverted T-type wall with a backfill slope, and evaluated seismic fragility based on relative horizontal displacements of the wall. Nonlinear site response analysis was performed for each site (S2 and S4) using the seven ground motions to calculate various seismic loadings reflecting site characteristics. The numerical model was validated based on other numerical models, experiment results, and generalized formula for dynamic active earth pressure. We also determined the damage state and damage index based on the height of retaining wall, and developed the seismic fragility curves. The damage probabilities of the retaining wall for the S4 site were computed to be larger than those for the S2 site.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.4
• /
• pp.245-266
• /
• 2021

In this study, in order to practice the social inclusion of libraries, the related policies currently announced in the 3rd Comprehensive Library Development Plan were examined, and the current status of tasks promoted by central administrative agencies and metropolitan and provincial libraries was examined based on these policies. As a result, first, in terms of active information welfare realization, various programs and services are being implemented to bridge the knowledge and information gap, but it seems that the scope of the target should be expanded in the future, cooperation with related organizations, and infrastructure improvement. Second, in terms of expanding the openness of the space, the expansion of the open space as an open space and the application of universal design are being performed. In the future, it seems that the scope of universal design application should be expanded in consideration of budget investment for continuous space reconstruction and diversity of users. Third, in terms of linking services across boundaries, services and programs are provided to infants and toddlers, children, women, the elderly, the underprivileged, job seekers, and multicultural families. In the future, it seems that the improvement of the service system for the expansion of inclusive services in libraries should precede, and cooperation between related ministries should be made to provide differentiated services. Finally, it is expected that future policy-making tasks for social inclusion should be considered not only for books, programs, and spaces, but also for librarians' education, establishment of cooperative networks with related organizations, and marketing for services and programs.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.684-693
• /
• 2021

Purpose: The purpose is to establish a safe facility environment from abnormal voltages such as lightning by developing a smart land resistance measuring device that can acquire real-time land resistance data using Arduino. Method: This paper studied design models and application cases by developing a land resistance acquisition and analysis system with Arduino and a power line communication (PLC) system. Some sites in the wind power generation complex in Gyeongsangnam-do were selected as test beds, and real-time land resistance data applied with new technologies were obtained. The electrode arrangement adopted a smart electrode arrangement using a combination of a Wenner four electrode arrangement and a Schlumberger electrode arrangement. Result: First, the characteristic of this technology is that the depth of smart multi-electrodes is organized differently to reduce the error range of the acquired data even in the stratigraphic structure with specificity between floors. Second, IT convergence technology was applied to enable real-time transmission and reception of information on land resistance data acquired from smart ground electrodes through the Internet of Things. Finally, it is possible to establish a regular management system and analyze big data accumulated in the server to check the trend of changes in various elements, and to model the optimal ground algorithm and ground system design for the IT convergence environment. Conclusion: This technology will reduce surge damage caused by lightning on urban infrastructure underlying the 4th industrial era and design an optimized ground system model to protect the safety and life of users. It is also expected to secure intellectual property rights of pure domestic technology to create jobs and revitalize our industry, which has been stagnant as a pandemic in the post-COVID-19 era.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.35-42
• /
• 2021

The purpose of this paper is to review the small unmanned aerial system (sUAS) safety policy promoted by the United States(US) government. Therefore, in this paper, along with sUAS risk factors, the risk factors of sUAS that the US government is interested in are described. In addition, the risk factors were classified into physical and non-physical factors, and provisions mentioned in the Federal Aviation Administration(FAA) Relicensing Act were reviewed. Other risk scenarios were analyzed focusing on target scenario items that the FAA is interested in, such as flight operation disruption, infrastructure damage, and facility trespassing. Of course, we looked at the risk management principles promoted by the US FAA. In this paper, as a research method, the direction and contents of the FAA's sUAS policy were studied and reviewed from the analysis of major foreign journals and policy. In the research result of this paper, by analyzing the FAA sUAS safety risk management policy, the integrated operation and safety policy, physical risk management policy, operation and safety regulation, and sUAS policy and technology direction necessary for establishing the sUAS safety risk management guide in Korea are presented. The contribution of this study is to identify the leading US sUAS safety policy direction, and it can be used as basic data for deriving future domestic policy directions from this. Based on the research results presented in the future, policy studies are needed to derive detailed implementation plans.

• The Journal of Bigdata
• /
• v.6 no.1
• /
• pp.91-113
• /
• 2021

Despite the influence of real estate in the Korean asset market, it is not easy to predict market trends, and among them, apartments are not easy to predict because they are both residential spaces and contain investment properties. Factors affecting apartment prices vary and regional characteristics should also be considered. This study was conducted to compare the factors and characteristics that affect apartment prices in Seoul as a whole, 3 Gangnam districts, Nowon, Dobong, Gangbuk, Geumcheon, Gwanak and Guro districts and to understand the possibility of price prediction based on this. The analysis used machine learning algorithms such as neural networks, CHAID, linear regression, and random forests. The most important factor affecting the average selling price of all apartments in Seoul was the government's policy element, and easing policies such as easing transaction regulations and easing financial regulations were highly influential. In the case of the three Gangnam districts, the policy influence was low, and in the case of Gangnam-gu District, housing supply was the most important factor. On the other hand, 6 mid-lower-level districts saw government policies act as important variables and were commonly influenced by financial regulatory policies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.493-503
• /
• 2021

In this study aviation authority officials were classified into four cultural groups according to culture theory, and then questioned to determine the effects of cultural bias on their social acceptance of a new air traffic flow management system. Based on previous studies, cultural biases were categorized as egalitarianistic, individualistic, fatalistic, and hierarchical, and social acceptances were considered to be influenced by four variables, that is, perceptions of usefulness, work attitude, intention to use, and behavior (job absorption). Empirical analysis showed that hierarchy had a significant positive effect on social acceptance, and egalitarianism was found to have a significant positive effect on social acceptance with 95% credibility. We propose the organizational culture of Korean government be changed to accept the diverse opinions of government officials during the implementation phase of the new system recommended by ICAO.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.520-525
• /
• 2019

Mines are an important infrastructure for securing resources, but safety problems can arise in the course of operation. Recently, the mining process is very complicated due to the large scale and mechanization. Therefore, it is necessary to construct accurate geospatial information on mine for systematic and safe mine operation. The geospatial information construction using the existing total station has a disadvantage that a lot of work time is required because the target must be collimated and measured. In this study, the data of the mines were acquired with the total station and the 3D laser scanner, and the mine spatial information was constructed by using the shape based registration method. By using the static scanner data of some area applying the reference point surveying result of the total station, it was possible to construct the accurate result on the wide area acquired by the mobile scanner effectively. Also, the accuracy of the constructed geospatial information was evaluated and the deviation of mean 0.083m was shown. Point cloud products constructed through the research can contribute to the efficiency improvement of mine management by enabling quantitative analysis such as visualization of mine shape, distance, area and slope, and automation of drawing creation for cross section shape.