• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.444-447
• /
• 2004

SNR(Signal to Noise Ratio) is one of the most important performance for the electro-optical camera system. This paper shows not only the SNR analyses for the MSC system, which is the payload in the KOMPSAT2 satellite, but also the trials for its improvement in the electronics circuit design. The MSC deals with one panchromatic band and four multi-spectral bands. The SNR analyses are performed based on the MSC design for the each band and assuming that the defined radiance reached directly to the sensor entrance pupil. In the SNR calculation, shot noise, dark current noise, analog electronics noise and ADC quantization noise are considered as noise sources. In these noise sources, especially, the electronics noise depends on the camera electronics design. This paper shows the camera electronics design to increase SNR and its test results as well as the SNR analyses.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.759-764
• /
• 2010

In this study, from the comparison of the results obtained by 3 dimensional dynamic analyses using the inverse-calculated properties and those by calculating using the real earthquake records, the inverse calculation method for obtaining the dynamic properties of rockfill materials was verified. The fundamental frequency of the dam was determined by analyzing the response spectrum of observed records. By repeated dynamic analyses for various shear moduli of rockfill material, the shear moduli in the rockfill zone that satisfy the relationship between the fundamental frequency obtained by analysis of the observed records and that by numerical analyses were determined. Using the determined shear moduli, the 3 dimensional dynamic analyses for the dam were carried out and the result were compared with the real response characteristics on the crest of the dam.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.4
• /
• pp.22-31
• /
• 2008

In this study, computer applied engineering (CAE) techniques are fully used to conduct structural and dynamic analyses of a huge composite rotor blade. Computational fluid dynamics is used to predict aerodynamic load of the rotating wind-turbine blade model. Static and dynamic structural analyses are conducted based on finite element method for composite laminates and multi-body dynamic simulation tools. Various numerical results for aerodynamic load, static stress, buckling and dynamic analyses are presented and characteristics of structural behaviors are investigated herein.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.105.6-105
• /
• 2001

Fish schools behave like a single organism and offer a considerable survival advantage. In our simulations, the fish school is well organized and behaves like a single creature depending solely on the interactions among individuals without having any director fish. This kind of system can be said as the typical one of "Complex Systems". We make clear the validity of fractal analyses to evaluate fish school movements through evaluation of both the simulated movements and the real sardine movements taken by video tape. The analyses showed that we need two kinds of fractal dimensions (D$_1$, D$_2$) to fit to the observations; the one(D$_1$) corresponds to smaller coarsening levels and D$_2$ does to larger coarsening levels. The double linear analyses in ...

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1068-1073
• /
• 2007

3D finite element analyses of a corrugated steel web girder and a steel truss web girder are conducted to investigate the static and dynamic behaviour of the hybrid girders. And the analyses results are compared with those by the equivalent beam theory. The equivalent theory is a theory that all section properties of a truss structure are replaced by section properties of a beam including the shear coefficient. When applying the equivalent beam theory, the shear coefficient of the corrugated steel web girder is estimated as the area ratio of total section to web section and that of the steel truss web girder is calculated by the equation proposed by Dewolf. Static deflections and natural frequencies by 3D finite element analyses and the those by the equivalent beam theory are relatively in good agreement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.679-686
• /
• 2000

Reactor Noise is defined as the fluctuations of measured instrumentation signals during full-power operation of reactor which have informations on reactor system dynamics such as neutron kinetics, thermal-hydraulics, and structural dynamics. Reactor noise analyses of ex-core neutron detector signals have been performed to monitor the vibration modes of reactor internals such as fuel assembly and Core Support Barrel in Yonggwang 3&4 Nuclear Power Plant. A real time mode separation technique have been developed and applied for the analyses. It has been found that the first vibration mode frequency of the fuel assembly was around 2.5 Hz, the beam and shell mode frequencies of CSB(Core Support Barrel) 8 Hz and 14.5 Hz, respectively. Also the analyses data base have been constructed for the continuous monitoring and diagnose of the reactor internals.

• Journal of the Korean Society of Costume
• /
• v.58 no.5
• /
• pp.211-231
• /
• 2008

To conserve historic textiles, analyses of textile materials, pollutants and deterioration are prerequisite steps. Based upon analytical results, guides for conservation of historic textiles are established. In analyses of textile materials, pollutants and deterioration, there are chemical methods(burning, solubility and staining), physical methods(microscopy and density) and instrumental analysis(Fourier Transform Infrared Spectroscopy (FT-IR), Fourier Transform Raman Spectroscopy(FT-Raman), Gas Chromatography(GC), Mass Spectroscopy(MS), X-Ray Fluorescence (EDXRF, WDXRF), Energy Dispersive Spectroscopy(EDS), and X-Ray Diffraction(XRD), Tensile Testing Machine etc.). Combination of qualitative and quantitative analyses makes accurate diagnosis of textile condition possible. As examples of analyses and conservation of historic textiles, Chuninsan(19 century) similar to sunshade with handing down historic textile and golden decorative skirt(17 century) with excavated costume are taken.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1747-1754
• /
• 2004

In this study, a new harmonic axisymmetric thick shell element for static and dynamic analyses is proposed. The newly proposed element considering shear strain is based on a modified Hellinger-Reissner variational principle, and introduces additional nodeless degrees for displacement field interpolation in order to enhance numerical performance. The stress parameters selected via the field-consistency concept. are very important in formulating a trouble-free hybrid-mixed elements. For computational efficiency, the stress parameters are eliminated by the stationary condition and then the nodeless degrees are condensed out by the dynamic reduction. Several numerical examples confirm that the present element shows improved efficiency and yields very accurate results for static and vibration analyses.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.780-788
• /
• 2004

To avoid the unit inconsistency problem in the conventional Jacobian matrix, new formulation of a dimensionally homogeneous inverse Jacobian matrix for parallel manipulators with a planar mobile platform by using three end-effector points was presented (Kim and Ryu, 2003). This paper presents force relationships between joint forces and Cartesian forces at the three End-Effector points. The derived force relationships can then be used for analyses of the input/output force transmission. These analyses, forward and inverse force transmission analyses, depend on the singular values of the derived unit consistent Jacobian matrix. Using the proposed force relationship, a numerical example is presented for actuator size design of a 3-RRR planar parallel manipulator.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1500-1505
• /
• 2003

In order to avoid the unit inconsistency problem in the conventional Jacobian matrix, previously we presented new formulation of a dimensionally homogeneous inverse Jacobian matrix for parallel manipulators with a planar mobile platform by using three end-effector points based on the velocity relationship [1]. This paper presents force relationships between joint forces and Cartesian forces at the three End-Effector points. The derived force relationships can then be used for analyses of the input/output force transmission. These analyses, forward and inverse force transmission analyses, depend on the singular values of the derived dimensionally homogeneous Jacobian matrix. Using the proposed force relationship, a numerical example is presented for actuator size design of a 3-RRR planar parallel manipulator.