• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.283-288
• /
• 2000

본 논문은 마이크로프로세서를 이용하여 구현하는 전파브리지 인버터의 새로운 PWM 제어 방법을 제안한다. 이 방법은 단방향 전파 브리지 인버터의 한 주기를 주파수 변조비로 등간격 분할하고 기준 기본파와 인버터의 출력 기본파의 진폭을 비교하는 PWM 제어 방법이다. 이 방법을 이용하면 각 간격의 turn-on time 계산이 매우 용이하여 마이크로프로세서 구현에 매우 적합하다. 그리고, 고조파 해석에 있어서 주파수 변조비가 크면 모든 고조파를 무시할 수 있음을 보여준다 시뮬레이션과 실험을 통하여 타당성을 입증하였다.

• Advances in aircraft and spacecraft science
• /
• 제6권1호
• /
• pp.1-18
• /
• 2019

This present article represents the study of the forced vibration of nanobeam of a single-walled carbon nanotube (SWCNTs) surrounded by a polymer matrix. The modeling was done according to the Euler-Bernoulli beam model and with the application of the non-local continuum or elasticity theory. Particulars cases of the local elasticity theory have also been studied for comparison. This model takes into account the different effects of the interaction of the Winkler's type elastic medium with the nanobeam of carbon nanotubes. Then, a study of the influence of the amplitude distribution and the frequency was made by variation of some parameters such as (scale effect ($e_0{^a}$), the dimensional ratio or aspect ratio (L/d), also, bound to the mode number (N) and the effect of the stiffness of elastic medium ($K_w$). The results obtained indicate the dependence of the variation of the amplitude and the frequency with the different parameters of the model, besides they prove the local effect of the stresses.

• 한국식품저장유통학회지
• /
• 제30권5호
• /
• pp.785-796
• /
• 2023

The aim of this study was to elucidate chemical structures and rheological properties of arabinogalactans (AGs) isolated from three legumes including black gram (BG), great northern bean (GNB), and California small white bean (CSWB). The ratio of galactose to arabinose (G/A) in three legumes increased in the order of BG > GNB > CSWB. The rheological measurements of 1-5% (w/v) AG solutions revealed Newtonian and non-Newtonian flow behaviors. BG exhibited yield stress, indicating plastic behavior. Small-amplitude oscillatory tests indicated viscoelastic properties of BG, GNB, and CSWB ranging from solid-like, paste-like, and liquid-like behaviors, respectively. Small-strain oscillatory tests were conducted to assess the structure recovery of the AGs after pre-shearing. G" values of BG and GNB increased, but those of CSWB remained constant after shearing. These results suggest that the chemical structures of the AGs, particularly their G/A ratios, influence their rheological properties.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.312-317
• /
• 2005

Fluid-elastic instability and turbulence excitation for an under developing steam generator are investigated numerically. The stability ratio and the amplitude of turbulence excitation are obtained by using the PIAT (Program for Integrity Assessment of Steam Generator Tube) code from the information on the thermal-hydraulic data of the steam generator. The aspect ratio, the ratio between the height of U-tube from the upper most tube support plate (h) and the width of two vertical portion of U-tube (w), is defined for geometric parameter study. Several aspect ratios with relocation of tube support plates are adopted to study the effects on the mode shapes and characteristics of flow-induced vibration. When the aspect ratio exceeds value of 1, most of the mode shapes at low frequency are generated at the top of U-tube. It makes very high value of the stability ratio and the amplitude of turbulent excitation as well. We can consider that the local mode shape at the upper side of U-tube will develop the wear phenomena between the tube and the anti-vibration bars such as vertical, horizontal, and diagonal strips. It turns out that the aspect ratio reveals very important parameter for the design stage of the steam generator. The appropriate value of the aspect ratio should be specified and applied.

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1009-1015
• /
• 2005

Fluid-elastic instability and turbulence excitation for an under developing steam generator are investigated numerically. The stability ratio and the amplitude of turbulence excitation are obtained by using the $PIAT^{(R)}$ (program for integrity assessment of steam generator tube) code from the information on the thermal-hydraulic data of the steam generator. The aspect ratio, the ratio between the height of U-tube from the upper most tube support Plate (h) and the width of two vertical portion of U-tube (w), is defined for geometric parameter study. Several aspect ratios with relocation of tube support plates are adopted to study the effects on the mode shapes and characteristics of flow-induced vibration. When the aspect ratio exceeds value of 1, most of the mode shapes at low frequency are generated at the top of U-tube. It makes very high value of the stability ratio and the amplitude of turbulent excitation as well. We can consider that the local mode shape at the upper side of U-tube will develop the wear phenomena between the tube and the anti-nitration bars such as vortical, horizontal, and diagonal strips. It turns out that the aspect ratio reveals very important parameter for the design stage of the steam generator. The appropriate value of the aspect ratio should be specified and applied.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.59-68
• /
• 2017

This study focused on modeling the behavior of the compressive stress using the average strain and ultrasonic test results in concrete. Feed-forward backpropagation artificial neural network (ANN) models were used to compare four types of concrete mixtures with varying water cement ratio (WC), ordinary concrete (ORC) and concrete with short steel fiber-reinforcement (FRC). Sixteen (16) $150mm{\times}150mm{\times}150mm$ concrete cubes were used; each contained eighteen (18) data sets. Ultrasonic test with pitch-catch configuration was conducted at each loading state to record linear and nonlinear test response with multiple step loads. Statistical Spearman's rank correlation was used to reduce the input parameters. Different types of concrete produced similar top five input parameters that had high correlation to compressive stress: average strain (${\varepsilon}$), fundamental harmonic amplitude (A1), $2^{nd}$ harmonic amplitude (A2), $3^{rd}$ harmonic amplitude (A3), and peak to peak amplitude (PPA). Twenty-eight ANN models were trained, validated and tested. A model was chosen for each WC with the highest Pearson correlation coefficient (R) in testing, and the soundness of the behavior for the input parameters in relation to the compressive stress. The ANN model showed increasing WC produced delayed response to stress at initial stages, abruptly responding after 40%. This was due to the presence of more voids for high water cement ratio that activated Contact Acoustic Nonlinearity (CAN) at the latter stage of the loading path. FRC showed slow response to stress than ORC, indicating the resistance of short steel fiber that delayed stress increase against the loading path.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.362-369
• /
• 2007

APSK(Amplitude Phase Shift Keying) 계열의 디지털 변조 방식은 전송 심볼들이 성상도 상에서 원형으로 분포해 있는 구조적 특성을 갖고 있다. 이러한 구조로 인하여 QAM(Quadrature Amplitude Modulation) 계열의 변조 방식과 비교하여 평균 전력 대비 최대 전력의 크기를 감소시키는 효과를 얻을 수 있으며, 비선형 채널 환경에서 전송 시 성능 열화 정도를 감소시킬 수 있다. 이와 같은 장점으로, APSK 변조 방식은 최근 DVB-S2(Digital Video Broadcasting-Satellite, Version 2)를 포함하는 위성 통신 시스템에서 표준으로 채택되고 있다. 본 논문에서는 일정 크기 이상의 입력 전력 크기에 대해서는 출력 전력 크기가 포화되는 특성을 갖는 채널 모델을 사용하여, 16APSK 변조 방식 적용의 비트 오율 (BER; Bit Error Rate)의 상한 근사식을 유도하고 실제 실험 결과와 비교하여 정확성을 검증한다. 또한 유도식을 활용하여 비트 오율을 최소화시키는 입력 전력의 크기를 결정하였으며, 16APSK 내각원 반지름과 외각원 반지름 비율 및 비선형 채널의 포화 특성에 따른 성능 최적화 방안을 제시한다.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.107-114
• /
• 2012

본 논문은 기존 블라인드 등화기의 성능인 수렴 특성과 잔류 부호간 간섭의 영향을 경감시키기 위해 축소 신호점을 사용하고 비용 함수를 실수부와 허수부로 분리하여 처리하는 한 이중 구조 CR-CMA(Constellation Reduction CMA)에 관한 것이다. 기존의 CMA는 진폭만을 보상하고 위상은 보상을 하지 못하며, 이를 해결하기 위해 MCMA(Modified CMA)는 비용 함수만을 실수부와 허수부를 따로 처리하여 진폭과 위상을 보상하지만 진폭의 보상 능력과 초기 수렴 속도에서는 CMA보다 성능이 열악해지는 문제점이 있다. 제안하는 이중 구조 CR-CMA는 CMA와 MCMA(Modified CMA) 알고리즘 장점만을 살릴 수 있도록 비용 함수와 오차 함수를 실수부와 허수부로 나누어 처리하고 축소 신호점을 적용할 수 있도록 개량하여 진폭과 위상의 보상, 빠른 수렴 속도 및 잔류 ISI와 MD(Maximum Distortion) 량의 감소 그리고 MSE(Mean Square Error)와 양호한 심볼 오류율 (SER : symbol error ratio) 특성을 얻을 수 있음을 컴퓨터 시뮬레이션으로 확인하였다.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2014

In this paper, the new smart dimming algorithm which is mixed with PWM and PAM control method is proposed for reducing the power consumption of LED TV Backlight. The proposed technique is using the curve characteristics of LED forward voltage and current which is proportionally changing LED forward voltage as changing LED forward current. Therefore, each PWM and PAM control method has different LED forward voltage and current in the same brightness condition. The PWM control method adjusts the brightness of LED TV Backlight by only varying the duty ratio of PWM and constantly sustaining the amplitude of LED forward current and voltage. So, the level of LED forward current and voltage in the PWM control method is relatively high and constant regardless of duty ratio of PWM. On the other hand, the PAM control method adjusts the brightness of LED TV Backlight by directly varying the level of LED forward current. So, the level of LED forward current and voltage in the PAM control method is lowered according to the brightness level. For the above-mentioned reason, the PAM control method has the advantage of reducing the total power consumption of LED TV Backlight at the brightness condition of below 100%, compared with PWM control method. By implementing this characteristic to LED driver circuit with control algorithm in MCU, the power consumption of LED TV Backlight can expect to be reduced. The effectiveness of the proposed method, new smart dimming algorithm, CPWAM(=Conditional Pulse Width Amplitude Modulation), has been verified by experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2737-2740
• /
• 2003

This paper has been studied an algorithm for EMG signal amplitude estimation in noisy environment. The proposed method has the first stage decomposing the row vector from the delayed EMG signal and the second stage computing the eigenvalues by the eigen decomposition from the covariance matrix of the EMG signal matrix. The last stage is the estimation of RMS values from the eigenvalues. The proposed method was effective when the amplitude of the EMG signal is small, which means the signal to noise ratio is low.