Browse > Article
http://dx.doi.org/10.12989/aas.2019.6.1.001

Small-scale effect on the forced vibration of a nano beam embedded an elastic medium using nonlocal elasticity theory  

Belmahi, Samir (Department of Civil Engineering, University of Ibn Khaldoun)
Zidour, Mohammed (Department of Civil Engineering, University of Ibn Khaldoun)
Meradjah, Mustapha (Laboratory of Materials and Hydrology, University of Djillali Liabes)
Publication Information
Advances in aircraft and spacecraft science / v.6, no.1, 2019 , pp. 1-18 More about this Journal
Abstract
This present article represents the study of the forced vibration of nanobeam of a single-walled carbon nanotube (SWCNTs) surrounded by a polymer matrix. The modeling was done according to the Euler-Bernoulli beam model and with the application of the non-local continuum or elasticity theory. Particulars cases of the local elasticity theory have also been studied for comparison. This model takes into account the different effects of the interaction of the Winkler's type elastic medium with the nanobeam of carbon nanotubes. Then, a study of the influence of the amplitude distribution and the frequency was made by variation of some parameters such as (scale effect ($e_0{^a}$), the dimensional ratio or aspect ratio (L/d), also, bound to the mode number (N) and the effect of the stiffness of elastic medium ($K_w$). The results obtained indicate the dependence of the variation of the amplitude and the frequency with the different parameters of the model, besides they prove the local effect of the stresses.
Keywords
carbon nanotube; nanocomposite; nanobeam; vibration; Euler-Bernoulli; Winkler;
Citations & Related Records
Times Cited By KSCI : 42  (Citation Analysis)
연도 인용수 순위
1 Ahouel, M., Houari, M.S.A., Bedia, E.A. and Tounsi, A. (2016), "Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept", Steel Compos. Struct., 20(5), 963-981.   DOI
2 Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318.   DOI
3 Ait Yahia, S., Atmane, H.A., Houari, M.S.A. and Tounsi, A., (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., 53(6), 1143-1165.   DOI
4 Al-Basyouni, K.S., Tounsi, A. and Mahmoud, S.R. (2015), "Size dependent bending and vibration analysis of functionally graded micro beams based on modified couple stress theory and neutral surface position", Compos. Struct., 125, 621-630.   DOI
5 Ali-Akbari, H.R. and Firouz Abadi, R.D. (2015), "Nonlinear free vibration of single-walled carbon nanotubes embedded in viscoelastic medium based on asymptotic perturbation method", J. Sci. Eng., 6 (2), 42-58.
6 Ansari, R. and Hemmatnezhad, M. (2013), "Nonlinear finite element vibration analysis of double-walled carbon nanotubes based on Timoshenko beam theory", J. Vib. Control, 19(1), 75-85.   DOI
7 Attia, A., Bousahla, A.A., Tounsi, A., Mahmoud, S.R. and Alwabli, A.S. (2018), "A refined four variable plate theory for thermoelastic analysis of FGM plates resting on variable elastic foundations", Struct. Eng. Mech., 65(4), 453-464.   DOI
8 Bakis, C.E., Bank, L.C., Brown, V.L., Cosenza, E., Davalos, J.F., Lesko, J.J., Machida, A., Rizkalla, S.H. and Triantafillou, T.C. (2002), "Fiber-reinforced polymer composites for construction-state-of-the-art review", J. Compos. Construct., 6(2), 73-87.   DOI
9 Abdelaziz, H.H., Meziane, M.A.A., Bousahla, A.A., Tounsi, A., Mahmoud, S.R. and Alwabli, A.S. (2017), "An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions", Steel Compos. Struct., 25(6), 693-704   DOI
10 Abualnour, M., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2018), "A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates", Compos. Struct., 184, 688-697.   DOI
11 Belabed, Z., Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2018), "A new 3-unknown hyperbolic shear deformation theory for vibration of functionally graded sandwich plate", Earthq. Struct., 14(2), 103-115.   DOI
12 Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Beg, O.A. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos. Part B Eng., 60, 274-283.   DOI
13 Bellifa, H., Benrahou, K.H., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2017a), "A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams", Struct. Eng. Mech., 62(6), 695-702.   DOI
14 Beldjelili, Y., Tounsi, A. and Mahmoud, S.R. (2016), "Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., 18(4), 755-786.   DOI
15 Belkorissat, I., Houari, M.S.A., Tounsi, A., Bedia, E.A. and Mahmoud, S.R. (2015), "On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model", Steel Compos. Struct., 18(4), 1063-1081.   DOI
16 Bellifa, H., Bakora, A., Tounsi, A., Bousahla, A.A. and Mahmoud, S.R. (2017b), "An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates", Steel Compos. Struct., 25(3), 257-270.   DOI
17 Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Braz. Soc. Mech. Sci. Eng., 38(1), 265-275.   DOI
18 Benchohra, M., Driz, Z., Bakora, A. and Tounsi, A. (2018), "A new quasi-3D sinusoidal shear deformation theory for functionally graded plates", Struct. Eng. Mech., 65(1), 19-31.   DOI
19 Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431.   DOI
20 Besseghier, A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory", Smart Struct. Syst., 19(6), 601-614.   DOI
21 Bouhadra, A., Tounsi, A., Bousahla, A.A., Benyoucef, S. and Mahmoud, S.R. (2018), "Improved HSDT accounting for effect of thickness stretching in advanced composite plates", Struct. Eng. Mech., 66(1), 61-73.   DOI
22 Bouafia, K., Kaci, A., Houari, M.S.A., Benzair, A. and Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19(2), 115-126.   DOI
23 Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104.   DOI
24 Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422.   DOI
25 Boukhari, A., Atmane, H.A., Tounsi, A., Adda, B. and Mahmoud, S.R. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., 57(5), 837-859.   DOI
26 Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi, A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., 20(2), 227-249.   DOI
27 Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335.   DOI
28 Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", J. Comput. Methods, 11(6), 1350082.   DOI
29 Togun, N. and Bagdatli, S.M. (2016), "Nonlinear vibration of a nanobeam on a pasternak elastic foundation based on non local Euler-Bernoulli beam theory", Math. Comput. Appl., 21(3), 1-19.
30 Teodoru, I.B. and Musat, V. (2008), "Beam elements on linear variable two-parameter elastic foundation", Buletinul Institutului Politehnic din lasi., 54(2), 69-78.
31 Choi, S.M. and Awaji, H. (2005), "Nanocomposites: A new material design concept", Sci. Technol. Adv. Mater., 6(1), 2-10.   DOI
32 Chandra, S., Madhira, R.M. and Iyengar, N.G.R. (1987), "A new model for nonlinear subgrades", Proceedings of 5th ICMM, Roorkee, India.
33 Chemi, A, Zidour, M., Heireche, H., Rakrak, K. and Bousahla, A.A. (2018), "Critical buckling load of chiral double-walled carbon nanotubes embedded in an elastic medium", Mech. Compos. Mater., 53(6), 827-836.   DOI
34 Chikh, A., Tounsi, A., Hebali, H. and Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Struct. Syst., 19(3), 289-297.   DOI
35 de Azeredo, H.M.C. (2009), "Nanocomposites for food packaging applications", Food Res. Int., 42(9), 1240-1253.   DOI
36 Dihaj, A., Zidour, M., Meradjah, M., Rakrak, K., Heireche, H. and Chemi, A. (2018), "Free vibration analysis of chiral double-walled carbon nanotube embedded in an elastic medium using non-local elasticity theory and Euler Bernoulli beam model", Struct. Eng. Mech., 65(3), 335-342.   DOI
37 Dinev, D. (2012), "Analytical solution of beam on elastic foundation by singularity functions", Eng. Mech., 19(6), 381-392.
38 Doyle, J.F. (1997), Wave Propagation in Structures: Spectral Analysis Using Fast Discrete Fourier Transforms, Springer Science & Business Media, New York, NY, U.S.A.
39 Draiche, K., Tounsi, A. and Mahmoud, S.R. (2016), "A refined theory with stretching effect for the flexure analysis of laminated composite plates", Geomech. Eng., 11(5), 671-690.   DOI
40 Tounsi, A., Houari, M.S.A. and Benyoucef, S. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Technol., 24(1), 209-220.   DOI
41 Gay, D. (1987), Materiaux Composites, 5 eme Edition, Hermes-Lavoisier, France.
42 El-Haina, F., Bakora, A., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct. Eng. Mech., 63(5), 585-595.   DOI
43 Fourn, H., Atmane, H.A., Bourada, M., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "A novel four variable refined plate theory for wave propagation in functionally graded material plates", Steel Compos. Struct., 27(1), 109-122.   DOI
44 Gafour, Y., Zidour, M., Tounsi, A., Heireche, H. and Semmah, A. (2013), "Sound wave propagation in zigzag double-walled carbon nanotubes embedded in an elastic medium using nonlocal elasticity theory", Physica E, 48, 118-123.   DOI
45 Gorbunov-Posadov, M.I., Malikova, T.A. and Solomin, V.I. (1973), Analysis of Structures on Elastic Foundation, Stroiizdat, Moscow, Russia.
46 Hachemi, H., Kaci, A., Houari, M.S.A., Bourada, M., Tounsi, A. and Mahmoud, S.R. (2017), "A new simple three-unknown shear deformation theory for bending analysis of FG plates resting on elastic foundations", Steel Compos. Struct., 25(6), 717-726.   DOI
47 Hajnayeb, A. and Khadem, S.E. (2015), "An analytical study on the nonlinear vibration of a doublewalled carbon nanotube", Struct. Eng. Mech., 54(5), 987-998.   DOI
48 Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 235-253.   DOI
49 Hamidi, A., Zidour, M., Bouakkaz, K. and Bensattalah, T. (2018), "Thermal and small-scale effects on vibration of embedded armchair single-walled carbon nanotubes", J. Nano Res., 51, 24-38.   DOI
50 Harris, P.J.F. (1999), Carbon Nanotubes and Related Structures: New Materials for the Twenty-first Century, Cambridge University Press, New York, NY, U.S.A.
51 Harris, P.J.F. (2009), Carbon Nanotube Science Synthesis, Properties and Applications, Cambridge University Press, New York, NY, U.S.A.
52 Hebali, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Bedia, E.A.A. (2014), "A new quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", ASCE J. Eng. Mech., 140(2), 374-383.   DOI
53 Heireche, H., Tounsi, A., Benzair, A. and Mechab, I. (2008), "Sound wave propagation in single-walled carbon nanotubes with initial axial stress", J. Appl. Phys., 104(1), 014301.   DOI
54 Hetenyi, M. (1961), Beams on Elastic Foundations, University of Michigan Press, Ann Arbor, U.S.A.
55 Hina, S., Zhang, Y. and Wang, H. (2014), "Characterization of polymeric solutions: A brief overview", Rev. Adv. Mater. Sci., 36(2), 165-176.
56 Houari, M.S.A., Bessaim, A., Bernard, F., Tounsi, A. and Mahmoud, S.R. (2018), "Buckling analysis of new quasi-3D FG nanobeams based on nonlocal strain gradient elasticity theory and variable length scale parameter", Steel Compos. Struct., 28(1), 13-24.   DOI
57 Hu, H., Onyebueke, L. and Abatan, A. (2010), "Characterizing and modeling mechanical properties of nanocomposites, review and evaluation", J. Minerals Mater. Characterization Eng., 9(4), 275-319.   DOI
58 Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354(6348), 56-58.   DOI
59 Youcef, D.O., Kaci, A., Benzair, A., Bousahla, A.A. and Tounsi, A. (2018), "Dynamic analysis of nanoscale beams including surface stress effects", Smart Struct. Syst., 21(1), 65-74.   DOI
60 Yazid, M., Heireche, H., Tounsi, A., Bousahla, A.A. and Houari, M.S.A. (2018), "A novel nonlocal refined plate theory for stability response of orthotropic single-layer graphene sheet resting on elastic medium", Smart Struct. Syst., 21(1), 15-25.   DOI
61 Younsi, A., Tounsi, A., Zaoui, F.Z., Bousahla, A.A. and Mahmoud, S.R. (2018), "Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates", Geomech. Eng., 14(6), 519-532.   DOI
62 Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: An assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., 54(4), 693-710.   DOI
63 Zidi, M., Tounsi, A., Houari, M.S.A. and Beg, O.A. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerospace Sci. Tech., 34, 24-34.   DOI
64 Nguyen, T.N., Kim, N. and Lee, J. (2017), "Static behavior of nonlocal Euler-Bernoulli beam model embedded in an elastic medium using mixed finite element formulation", Structural Eng. Mech., 63(2), 137-146.   DOI
65 Zine, A., Tounsi, A., Draiche, K., Sekkal, M. and Mahmoud, S.R. (2018), "A novel higher-order shear deformation theory for bending and free vibration analysis of isotropic and multilayered plates and shells", Steel Compos. Struct., 26(2), 125-137.   DOI
66 Mokhtar, Y., Heireche, H., Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2018), "A novel shear deformation theory for buckling analysis of single layer graphene sheet based on nonlocal elasticity theory", Smart Struct. Syst., 21(4), 397-405.   DOI
67 Mouffoki, A., Bedia, E.A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory", Smart Struct. Syst., 20(3), 369-383.   DOI
68 Mourelatos, Z.P. and Parsons, M.G. (1987), "A finite element analysis of beams on elastic foundation including shear and axial effects", Comput. Struct., 27(3), 323-331.   DOI
69 Mrazova, M. (2013), "Advanced composite materials of the future in aerospace industry", Incas Bulletin, 5(3), 139-150.   DOI
70 Ochsner, A. and Shokuhfar, A. (2013), New Frontier of Nanoparticles and Nanocomposite Materials, Novel Principles and Techniques, Springer, Germany.
71 Okpala, C.C. (2013), "Nanocomposites: An overview", J. Eng., Res. Develop., 8(11), 17-23.
72 Sachse, S., Gendre, L., Silva, F., Zhu, H., Leszczynska, A., Pielichowski, K., Ermini, V. and Njuguna, J. (2013), "On nanoparticles release from polymer nanocomposites for applications in lightweight automotive components", J. Physics, Conference Series, 429(1), 012046.   DOI
73 Okpala, C.C. (2014), "The benefits and applications of nanocomposites", J. Adv. Engg. Tech., 5(4), 12-18.
74 Rajpurohit, V.K., Gore, N.G. and Sayagavi, V.G. (2014), "Analysis of structure supported on elastic foundation", IJEAT, 4(1), 1-6.   DOI
75 Rakrak, K., Zidour, M., Heireche, H., Bousahla, A.A. and Chemi, A. (2016) "Free vibration analysis of chiral double-walled carbon nanotube using non-local elasticity theory", Adv. Nano Res., 4(1), 31-44.   DOI
76 Selvadurai, A.P.S. (1979), Elastic Analysis of Soil-Foundation Interaction, Elsevier Scientific Publishing Company, New York, U.S.A.
77 Shehata, F., Abdelhameed, M., Fathy, A. and Elmahdy, M. (2011), "Preparation and characteristics of Cu-$Al_2O_3$ nanocomposite", Open J. Metal, 1(2), 25-33.   DOI
78 Teodoru, I.B. (2009b), "Beams on elastic foundation the simplified continuum approach", Buletinul Institutului Politehnic din lasi. Sectia Constructii, Arhitectura, 55(4), 37- 45.
79 Soltani, P., Bahramian, R. and Saberian, J. (2015), "Nonlinear vibration analysis of the fluid-filled single walled carbon nanotube with the shell model based on the nonlocal elacticity theory", J. Solid Mech., 7 (1), 58-70.
80 Teodoru, I.B. (2009a), "EBBEF2p - A computer code for analysing beams on elastic foundations", Intersections/Intersect II, 6(1), 28-44.
81 Karami, B., Janghorban, M. and Tounsi, A. (2018a), "Nonlocal strain gradient 3D elasticity theory for anisotropic spherical nanoparticles", Steel Compos. Struct., 27(2), 201-216.   DOI
82 Kacar, A., Tugba, H.T. and Metin, O.K. (2011), "Free vibration analysis of beams on variable winkler elastic foundation by using the differential transform method", Math. Comput. Appl., 16(3), 773-783.
83 Kaci, A., Houari, M.S.A., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "Post-buckling analysis of shear-deformable composite beams using a novel simple two-unknown beam theory", Struct. Eng. Mech., 65(5), 621-631.   DOI
84 Karami, B., Janghorban, M. and Tounsi, A. (2017), "Effects of triaxial magnetic field on the anisotropic nanoplates", Steel Compos. Struct., 25(3), 361-374.   DOI
85 Karami, B., Janghorban, M. and Tounsi, A. (2018b), "Variational approach for wave dispersion in anisotropic doubly-curved nanoshells based on a new nonlocal strain gradient higher order shell theory", Thin-Walled Struct., 129, 251-264.   DOI
86 Karami, B., Janghorban, M., Shahsavari, D. and Tounsi, A. (2018c), "A size-dependent quasi-3D model for wave dispersion analysis of FG nanoplates", Steel Compos. Struct., 28(1), 99-110.   DOI
87 Karasin, A. and Gultekin, A. (2014), "An approximate solution for plates resting on winkler foundation", J. Civil Eng. Technol., 5(11), 114-124.
88 Khetir, H., Bouiadjra, M.B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates", Struct. Eng. Mech., 64(4), 391-402.   DOI
89 Karlicic, D., Kozic, P. and Pavlovic, R. (2015), "Flexural vibration and buckling analysis of single-walled carbon nanotubes using different gradient elasticity theories based on reddy and huu-tai formulations", J. Theor. Appl. Mech., 53(1), 217-233.   DOI
90 Kaushik, B.K. and Majumder, M.K. (2015), Carbon Nanotube Based VLSI Interconnects: Analysis and Design, Springer, Germany.
91 Kiani, K. (2014), "Vibration and instability of a single-walled carbon nanotube in a three-dimensional magnetic field", J. Phys. Chem. Solids, 75(1), 15-22.   DOI
92 Kumar, A. and Gupta, R.K. (2003), Fundamentals of Polymers Engineering, Second edition, Revised and Expanded, CRC Press, Florida, U.S.A.
93 Kumar, D. and Srivastava, A. (2016), "Elastic properties of CNT- and graphene-reinforced nanocomposites using RVE", Steel Compos. Struct., 21(5), 1085-1103.   DOI
94 Mahi, A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model. 39(9), 2489-2508.   DOI
95 Menasria, A., Bouhadra, A., Tounsi, A., Bousahla, A.A. and Mahmoud, S.R. (2017), "A new and simple HSDT for thermal stability analysis of FG sandwich plates", Steel Compos. Struct., 25(2), 157-175.   DOI
96 Acton, Q.A., (2013), Issues in Hydrogen, Fuel Cell, Electrochemical, and Experimental Technologies, Scholarly Edition, Atlanta, Georgia, U.S.A.
97 Ahmadi Asoor, A.A., Valipour, P. and Ghasemi, S.E. (2016), "Investigation on vibration of single-walled carbon nanotubes by variational iteration method", Appl. Nanosci., 6(2), 243-249.   DOI