• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1665-1666
• /
• 2008

There are three main devices such as boiler producing steam, turbine driving generator and generator producing electricity. An electrical generator in power plant is driven and maintained its speed at rated by steam turbine which is coupled into generator directly. Therefore after the steam turbine reaches its rated speed and the generator gets into parallel operation with power grid, the electrical power can be increased by turbine controller or governor. The first governor was invented by James Watts for the steam engine to be maintained at a constant speed. The first governor by him was mechanical type with fly balls. The electrical type governor was created due to the progress of electronic devices such as operational amplifiers or integrated circuits. and Today digital electronic type of governor is being widely used in most prime movers.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.298-303
• /
• 2004

The active magnetic bearing system for a TMP consists of four couples of magnets, five gap sensors with its amplifiers and a digital PID controller. For stabilizing and providing damping, digital PID controller is applied for each control axes and the inter-axis cross feedback controller is also applied to suppress low frequency vibration caused by gyroscopic moment of the rotor. Therefore in this paper, a digital controller of magnetic bearing for a TMP is design and examined.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1551-1558
• /
• 2017

Audio power amplifiers have been designed based on the premise that the impedance of loudspeakers is fixed at nominal 4 ohms or 8 ohms. However, it is known that the impedance varies with frequency and takes on the nominal value at some limited frequencies. The principle of the loudspeaker operation reveals that the sound pressure produced by the loudspeaker is proportional to the current flowing in the voice coil, not the voltage between the two terminals. We take the characteristics of the loudspeaker into account and compare the frequency responses of the loudspeaker in voltage-drive mode and current-drive mode via computer simulations, to conclude that the audio amplifier drive mode should be re-considered in an effort to improve the sound quality.

• Journal of Korea Multimedia Society
• /
• v.21 no.9
• /
• pp.1110-1118
• /
• 2018

Personal sound amplifiers(PSAPs) provide accessible and affordable healthcare to individuals with hearing disability. Many studies are in progress for affordable PSAP development, but still people do not have a best fitting profile for the PSAP depending on their hearing test. As a result, they do not have a personalized and profiled music and sound, which are very helpful for those who has hearing problems. In this paper, we propose a device and mobile system to provide music with an equalizer value according to the hearing condition of an individual to prevent the hearing loss. In order to overcome the limit of frequency band of the equalizer in a smart phone, we developed bluetooth controlled equalizer based on the fitting profiles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1089-1095
• /
• 2005

This paper presents a new low-cost Built-In Self-Test (BIST) circuit for 50Hz low noise amplifier (LNA). The BIST circuit is designed for system-on-chip (SoC) transceiver environment. The proposed BIST circuit measures the LNA specifications such as input impedance, voltage gaih, noise figure, and input return loss all in a single SoC environment.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.117-126
• /
• 1996

Generally, the distortion of the negative feedback amplifier is reduced by a factor equal to the return difference (1+${\beta}_1A_1$), but the proposed feedforward amplifier is reduced by a factor equal to the square of the return difference (1+${\beta}_1A_1$). In this paper, a feedforward amplifier with error correction is designed and implemented. So as to evaluate the characteristics of the harmonic distortion that the inverting feedforward amplifier is compared with that of the reference amplifier without feedforward error correction. It is confirmed that the proposed method should be able to reduce much greater than compared with a conventional negative feedback amplifier. Therefore it should be noted that the proposed feedforward amplifier network is also acceptable for wide-band amplifiers and the network which is demanded to improve the harmonic distortion.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.596-600
• /
• 2009

We are developing a simple low-cost wind velocity sensor based on small microphones. The sensor system consists of 4 microphones covered with specially shaped wind screens, 4 pre-amplifiers that respond to low frequency, and a commercial sound interface with multi channel inputs. In this paper, we first present the principle of the sensor, i.e., technique to successfully suppress the influence of external noise existing in the environment in order to determine the wind velocity and the wind direction from the output from a microphone. Then, we present an application for generating realistic motions of a virtual tree swaying in real wind. Although the current sensor outputs significant leaps in a measured sequence of directions, the interactive animations demonstrate that it is usable for such applications, if we could reduce the leaps to some degree.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.569-574
• /
• 1998

This paper presents a two-paralleled 4 quadrant DC chopper type PWM power conversion circuit in order to generate a gradient magnetic field in the Magnetic Resonance Imaging (MRI) system. This power amplifier is connected in parallel with the conventional 4-quadrant DC chopper using IGBTs at their inputs/outputs to realize further high-power density, high speed current tracking control, and to get a low switching ripple amplitude in a controlled current in the Gradient Coils (GCs). Moreover, the power conversion circuit has to realize quick rise/fall response characteristics in proportion to various target currents in GCs. It is proposed in this paper that a unique control scheme can achieve the above objective. DSP-based control systems realize a high control facility and accuracy. It is proved that the new control system will greatly enlarge the diagnostic target and improve the image quality of MRI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.6
• /
• pp.554-562
• /
• 1987

In this paper, we have proposed the RC Wien-Bridge oscillator consisting of three oprational amplifiers in order to improve the frequency range, and the proposed oscillator has been realized a new SC Wien-Bridge oscillator for LSI realization by the forward Z transform method. The realized SC oscilltor has been affirmed that the frequency range has been improved more than Reddy's. Budak and Nay's by the analysis of pole loci as a frequency function f. Also, it has been confirmed that the designed SC oscillator has been satisfied substantially the oscillated condition by the open-loop measurements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.311-316
• /
• 2012

In this paper, chaotic circuit of the Lorentz system for engineering applications was implemented using resistor, multipliers, capacitors and operational amplifiers. The implemented Lorentz chaotic system was analysed by PSPICE program. PSPICE simulation results show many kind of chaotic phenomena such time waveforms and phase plots. Meanwhile, according to resistor's variation, we got that Lorentz system show equilibrium state, periodic state and chaotic state.