• 한국광학회지
• /
• 제11권3호
• /
• pp.171-178
• /
• 2000

본 논문에서는 $1.47mu$m 증폭대역을 구현하는 툴륨이 첨가된 플루오르 고아섬유 증폭기(Thulium doped fiuoride fiber amplifier : TDFFA)를 수치 해석적 방법으로 모델링하였다. 본 모델은 상위변환(unconvenverison) 펌핑 방식을 도입하였고, $0.8\mu$m, $1.4\mu$m, $ 1.9\mu$m, $2.3 \mu$m 등의 다양한 전이 대역이 존재하는 Tm3+ 이온을 모델링하기 위하여 6개의 에너지 준위에 대한 비율식과 관계된 전이과정들을 고려하는 전파식을 사용하였고 트랜스버스 모드와 파워의 전방과 후방 전파를 고려하였다. 본 모델은 쥬드-오펠트(J-O) 이론, 에너지 캡 법칙, 맥콤보 관계 등을 이용하여 구한 TDF의 분광 파라미터들을 사용하였다. 시뮬레이션 결과는 이득과 잡음지수 등이 기존의 실험 결과와 비교하여 잘 부화된 결과를 보인다.

• 대한의용생체공학회:의공학회지
• /
• 제19권3호
• /
• pp.261-268
• /
• 1998

위전도는 피부전극을 이용하여 위에서 발생하는 전기신호를 측정하여 위운동상태를 측정하는 비관혈적인 검사방법이다. 본 연구에서는 임상적으로 유용한 위전도신호 측정 및 분석시스템을 개발하였으며, 개발시스템은 크게 하드웨어(생체증폭기, 필터)와 소프트웨어(유저인터페이스, 분석알고리듬, 환자데이터베이스)로 구성된다. 개발시스템의 생체신호증폭기는 신호분석에 용이하도록 3채널로 구성되어 있으며, 신호의 저장 및 분석은 PC에서 수행하도록 구성되어 있다. 위수축 정보의 획득을 위해서 분석신호는 16Hz로 샘플링하였으며, 위전도신호분석은 임상이용에 유용한 여러 가지 분석 파라메터를 추출할 수 있도록 하였다. 개발된 시스템은 동물실험을 통하여 성능을 평가하였으며, 현재 환자를 대상으로 임상시험이 진행중이다.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.58-63
• /
• 2002

OFDM 시스템에 있어서 송신 신호의 큰 PAPR는 비선형 증폭기를 통과할 때 심각한 신호 왜곡을 일으킨다. 이러한 PAPR을 감소하는 방법으로, 본 논문에서는 가장 간단한 클리핑 방법을 사용하여 시스템에 미치는 영향을 BER 특성의 기준으로 나타내고 제안된 시스템과 다른 여러 가지 시스템들을 비교하였다. 본 논문에서 제안한 방법은 QPSK 매핑후에 매핑된 신호사이에 0을 삽입하는 방법을 사용하여 동일한 PAPR 조건하에서 시스템에 미치는 영향을 비교하였다. 또한 다른 시스템들과의 BER 성능에 대한 데이터 전송률과 대역폭 관계의 trade-off가 있음을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.82-88
• /
• 2015

The magnetron, a vacuum tube, is currently the usual high-power microwave power source used for microwave heating. However, the oscillating frequency and output power are unstable and noisy due to the low quality of the high-voltage power supply and low Q of the oscillation circuit. A heating system with enhanced reliability and the capability for control of chemical reactions is desired, because microwave absorption efficiency differs greatly depending on the object being heated. Recent studies on microwave high-efficiency power amplifiers have used harmonic processing techniques, such as class-F and inverse class-F. The present study describes a high-efficiency 100 W GaN-HEMT amplifier that uses a harmonic processing technique that shapes the current and voltage waveforms to improve efficiency. The fabricated GaN power amplifier obtained an output power of 50.4 dBm, a drain efficiency of 72.9%, and a power added efficiency (PAE) of 64.0% at 2.45 GHz for continuous wave operation. A prototype microwave heating system was also developed using this GaN power amplifier. Microwaves totaling 400 W are fed from patch antennas mounted on the top and bottom of the microwave chamber. Preliminary heating experiments with this system have just been initiated.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.409-413
• /
• 2006

This paper deals with the design and testing of a simulator system for microgrids with distributed generations. This system is composed of a Real Time Digital Simulator (RTDS) and a power amplifier. The RTDS parts are operated for real time simulation for the microgrid model and the distributed generation source model. The power amplifiers are operated fur amplification of the RTDS's simulated output signal, which is a node voltage of the microgrid and distributed generation source. In this paper, we represent an RTDS system design, specification and test results of a power amplifier and simulation results of a PV (Photovoltaic) system and wind turbine system. The proposed system is applicable for development and performance testing of a PCS (Power Conversion System) for renewable energy sources.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2004

Using Se as a photoconductive element and ZnS as a luminescent element, a Se/ZnS thin film device for light amplifier applications was fabricated and its characteristics were investigated At various conditions of substrate temperatures, heat treatment times, and heat treatment temperatures, Se thin films and ZnS thin films were separately deposited by an EBE(Electron Beam Evaporation) method of an high accuracy in deposition rates and the optimum fabrication conditions for the Se thin film and the ZnS thin film with a hexagonal structure were obtained The Se/ZnS thin film light amplifier was fabricated by evaporating the ZnS thin film on an ITO(Indium Tin Oxide) glass and the Se thin film on the ZnS thin film in sequence.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.185-189
• /
• 1995

A high-power Nb:glass laser system(Simmyung I) has been contructed and tested. In this system, we used a Nb:YLF laser as a master oscillator, a 4-pass amplifier for pre-amplification, 5 stages of rod amplifiers, and spatial filtering and image reaying usits. The system has demonstrated in excess of 80J(2TW) with 40 psec(FWHM) pulse duration. Output energy, gain and spatial were measured at each amplification stage. With this laser system a preliminary X-ray generation experiment was performed. Pinhole images, X-ray diode signals and X-ray speriment were obtained for the irradiated target of copper. Detailed descriptions of the system performance and the X-tay generation experiment are presented.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.912-918
• /
• 1994

Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

• 한국재료학회지
• /
• 제11권5호
• /
• pp.385-392
• /
• 2001

집적형 광증폭기는 대량생산이 용이하고. 단일 칩에 다기능의 광소자를 집적할 수 있다는 장점 때문에 활히 연구되어져 왔다. 본 연구에서는 수동형 집적광소자의 제작에 사용되는 화염가수분해증착법 (FHD)을 이용하여 실리콘 (Si) /실리카 ($SiO_2$) 광도파막을 제작하고, 이 박막에 Solution Doping 법을 이용하여 $Er^{3+}$ 를 첨가하여 광증폭 매질을 제작하는 연구를 수행하였다.

• ETRI Journal
• /
• 제23권3호
• /
• pp.97-105
• /
• 2001

$1.6\;{\mu}m$ emission originated from $Pr^{3+}:\;(^3F_3,\;^3F_4)\;{\longrightarrow}\;^3H_4$ transition in $Pr^{3+}-\;and\;Pr^{3+}/Er^{3+}$-doped selenide glasses was investigated under an optical pump of a conventional 1480 nm laser diode. The measured peak wavelength and fullwidth at half-maximum of the fluorescent emission are ~1650nm and 120nm, respectively. A moderate lifetime of the thermally coupled upper manifolds of ${\sim}212{\pm}10{\mu}s$ together with a high stimulated emission cross-section of ${\sim}(3{\pm}1){\times}10^{-20}\;cm^2$ promises to be useful for $1.6{\mu}m$ band fiber-optic amplifiers that can be pumped with an existing high-power 1480 nm laser diode. Codoping $Er^{3+}$ enhances the emission intensity by way of a nonradiative $Er^{3+}:\;^4I_{13/2}\;{\longrightarrow}\;Pr^{3+}:\;(^3F_3,\;^3F_4)$ energy transfer. The Dexter model based on the spectral overlap between donor emission and acceptor absorption describes well the energy transfer from $Er^{3+}$ to $Pr^{3+}$ in these glasses. Also discussed in this paper are major transmission loss mechanisms of a selenide glass optical fiber.