• Journal of the Optical Society of Korea
• /
• 제10권1호
• /
• pp.11-15
• /
• 2006

We have proposed and theoretically verified an optical regenerator using a single semi-reflective semiconductor optical amplifier (SR-SOA). To explain the operation characteristics and the operation condition of the proposed opticalregenerator, the simplified gain model for the SR-SOA is introduced and confirmed by comparing the result of the SOA simulation based on the transfer matrix method (TMM). The simulation results show that both extinction ratio (ER) enhancement and signal amplification can be achieved in the proposed regenerator.

• Journal of Gastric Cancer
• /
• 제16권3호
• /
• pp.141-151
• /
• 2016

Purpose: The aim of the present study was to elucidate the clinicopathological significance and diagnostic accuracy of immunohistochemistry (IHC) for determining the mesenchymal epidermal transition (c-MET) expression in patients with gastric cancer (GC). Materials and Methods: The present meta-analysis investigated the correlation between c-MET expression as determined by IHC and the clinicopathological parameters in 8,395 GC patients from 37 studies that satisfied the eligibility criteria. In addition, a concordance analysis was performed between c-MET expression as determined by IHC and c-MET amplification, and the diagnostic test accuracy was reviewed. Results: The estimated rate of c-MET overexpression was 0.403 (95% confidence interval [CI], 0.327~0.484) and it was significantly correlated with male patients, poor differentiation, lymph node metastasis, higher TNM stage, and human epidermal growth factor receptor 2 (HER2) positivity in IHC analysis. There was a significant correlation between c-MET expression and worse overall survival rate (hazard ratio, 1.588; 95% CI, 1.266~1.992). The concordance rates between c-MET expression and c-MET amplification were 0.967 (95% CI, 0.916~0.987) and 0.270 (95% CI, 0.173~0.395) for cases with non-overexpressed and overexpressed c-MET, respectively. In the diagnostic test accuracy review, the pooled sensitivity and specificity were 0.56 (95% CI, 0.50~0.63) and 0.79 (95% CI, 0.77~0.81), respectively. Conclusions: The c-MET overexpression as determined by IHC was significantly correlated with aggressive tumor behavior and positive IHC status for HER2 in patients with GC. In addition, the c-MET expression status could be useful in the screening of c-MET amplification in patients with GC.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.70-74
• /
• 2007

This paper describes the development of a nano-positioning system for nanoscale science and engineering. Conventional positioning systems, which can be expensive and complicated, require the use of laser interferometers or capacitive transducers to measure nanoscale displacements of the stage. In this study, a new self-displacement sensing (SDS) nano-stage was developed using mechanical magnification of its displacement signal. The SDS nano-stage measured the displacement of its movement using a position-sensitive photodiode (PSPD), a laser source, and a hinge-connected rotating mirror plate. A beam from a laser diode was focused onto the middle of the plate with the rotating mirror. The position variation of the reflected beam from the mirror rotation was then monitored by the PSPD. Finally, the PSPD measured the amplified displacement as opposed to the actual movement of the stage via an optical lever mechanism, providing the ability to more precisely control the nanoscale stage. The displacement amplification process was modeled by structural analysis. The simulation results of the amplification ratio showed that the distance variation between the PSPD and the mirror plate as well as the length L of the mirror plate could be used as the basic design parameters for a SDS nano-stage. The PSPD was originally designed for a total travel range of 30 to 60 mm, and the SDS nano-stage amplified that range by a factor of 15 to 25. Based on these results, a SDS nano-stage was fabricated using principle of displacement amplification.

• 한국항해항만학회지
• /
• 제31권10호
• /
• pp.833-837
• /
• 2007

본 연구에서는 이득 평탄화된 어븀첨가 광섬유 증폭기를 제작하였다. 이득 평탄화 필터는 주기적으로 배열된 금속선을 이용하여 유도되는 장주기 광섬유 격자로 구현하였다. 980 nm 펌핑 레이저에 의해 증폭된 자발방출 출력 스펙트럼의 C-밴드 파장 영역에서 이득 리플을 제작된 필터를 적용하여 1 dB 이내로 억제하였다. 다중 채널을 동시에 증폭시킬 수 있는 성능은 페브리 페롯 레이저 다이오드를 이용하여 측정하였고 C-밴드에서 20 dB 이상 증폭시킬 수 있음을 보여주었다. 이 증폭기는 파장분할 다중화 방식의 장거리 광 전송에서 다중 채널을 동시에 증폭하는 효과적인 방법을 제공할 것이다.

• Journal of Microbiology and Biotechnology
• /
• 제31권12호
• /
• pp.1672-1683
• /
• 2021

Vibrio parahaemolyticus is recognized as one of the most important foodborne pathogens responsible for gastroenteritis in humans. The bla_CARB-17 gene is an intrinsic β-lactamase gene and a novel species-specific genetic marker of V. parahaemolyticus. In this study, a loop-mediated isothermal amplification (LAMP) assay combined with a lateral flow dipstick (LFD) was developed targeting this bla_CARB-17 gene. The specificity of LAMP-LFD was ascertained by detecting V. parahaemolyticus ATCC 17802 and seven other non-V. parahaemolyticus strains. Finally, the practicability of LAMP-LFD was confirmed by detection with V. parahaemolyticus-contaminated samples and natural food samples. The results showed that the optimized reaction parameters of LAMP are as follows: 2.4 mmol/l Mg²⁺, 0.96 mmol/l dNTPs, 4.8 U Bst DNA polymerase, and an 8:1 ratio of inner primer to outer primer, at 63℃ for 40 min. The optimized reaction time of the LFD assay is 60 min. Cross-reactivity analysis with the seven non-V. parahaemolyticus strains showed that LAMP-LFD was exclusively specific for V. parahaemolyticus. The detection limit of LAMP-LFD for V. parahaemolyticus genomic DNA was 2.1 × 10^-4 ng/μl, corresponding to 630 fg/reaction and displaying a sensitivity that is 100-fold higher than that of conventional PCR. LAMP-LFD in a spiking study revealed a detection limit of approximately 6 CFU/ml, which was similar with conventional PCR. The developed LAMP-LFD specifically identified the 10 V. parahaemolyticus isolates from 30 seafood samples, suggesting that this LAMP-LFD may be a suitable diagnostic method for detecting V. parahaemolyticus in aquatic foods.

• 한국지구과학회지
• /
• 제23권4호
• /
• pp.357-368
• /
• 2002

본 연구에서는 항아리 형태 젊은 초신성 잔해의 동력학을 설명하기 위해 분출물의 동력학적 효과를 고려하였다. 분출물과 성간 물질 사이에 존재하는 접촉불연속면에서 레일라-테일러(R-T)불안정에 기인한 자기장의 증폭호과가 고려되었다. 우주선 입자의 가속을 가정함으로서 합성전파 모형을 만들 수 있었으며 관측과의 비교를 위해 방위각을 따른 전파세기의 비(A)를 계산하였다. R-T불안정의 결과로 자란 가지의 경계면에서 압축, 전단, 인장의 결과로 충격파 후면의 자기장은 증폭되었다. 불안정의 시간에 따른 변화는 분출물의 감속에 민감하게 의존하며 초신성 잔해의 진화와 밀접히 관계됨을 볼 수 있었다. 자기장의 세기는 초기에 급격히 증가하며 역 충격파가 분출물의 등밀도지역으로 들어감에 따라 감소되었다. 그러나 이와 같은 초기 자기장 증폭의 효과는 초신성 잔해의 후기까지 남아 있음을 볼 수 있었다. 증폭된 자기장 영역에서 적도지역과 극지역의 자기장의 세기의 비는 최대 7.5까지 이를 수 있었다. 이와 같은 자기장의 증폭은 방위각에 따라 매우 큰 전파세기의 비를 만들 수 있었다(A=15). 증폭된 자기장의 세기는 수치계산의 분해능에 매우 민감함을 알 수 있었다. 본 연구에서는 우주선 입자의 가속효과가 자기장과 충격파 면이 이루는 각도에 의존한다는 가정 없이도 자기장의 증폭효과가 관측된 항아리 형태의 젊은 초신성 잔해를 만들 수 있음을 보였다. 그러나 이와 같은 기작이 효과적이기 위해서는 초신성 잔해 주위의 자기장이 잘 정열되어 있어야 한다. 항아리 형태의 젊은 초신성잔해의 수가 적게 관측되는 것은 이와 같은 조건이 성간에서 잘 이루어지지 않음을 의미한다.OH radical의 생성이 활발해져, $CH_4$의 소멸이 촉진되었을 가능성이 큰 것으로 나타났다. 전체 $CH_4$의 일평균 농도를 이용한 장주기적 추세에 대한 분석결과에 따르면, 국내의 두 관측지점들(무안, 태안)에서는 수일 주기의 농도 변화가 급격하게 이루어졌지만, 뚜렷한 계절적 주기는 발견하기가 어려웠다. 그런데 국외의 관측지점들에서는, 계절적 주기의 변화가 상대적으로 뚜렷하고 규칙적인 양상을 보여주었다. 지역별 $CH_4$ 농도간의 상관분석을 실시한 결과, 국내 두 지점들 간에는 양의 상관관계, 무안지역과 북반구의 관측점들과는 음의 상관관계를 보였다. 반면 남반구에 위치한 관측점들과는 양의 상관관계를 확인 할 수 있었다. $CH_4$ 농도의 장주기적 변화경향을 분석하기 위해, 단순회귀분석을 실시한 결과, $CH_4$ 농도의 증가율이 무안과 태안 지역에서 각각 연간 16.5, 14.8 ppb로 가장 높게 관측되었다. 관측점 주변에 복잡한 배출원의 작용이 가능하다는 점을 감안하여, 무안지역의 $CH_4$ 농도변화와 풍향과의 연계성을 비교해 보았다. 이 결과에 의하면, 동풍계열의 풍계가 나타날 때 고농도의 값이 나타났으며, 청정한 공기가 유입되는 남서풍의 풍계시에는 비교적 낮은 $CH_4$ 농도가 유지되었다. 이처럼 $CH_4$의 장주기적 분포특성은 연구대상지역의 복잡한 배출${\cdot}$소별작용과 연계되어 매우 다양하고 독특한 형태를 띠고 있음을 확인할 수 있었다.

• Earthquakes and Structures
• /
• 제19권1호
• /
• pp.1-16
• /
• 2020

This study presents an investigation of the dynamic interactions between a surface structure lying on two different soil deposits and a square-shaped buried structure embedded in the soil. To this end, a large number of numerical models are generated by using a well-known Finite Element Method software, i.e., OpenSEES. The interaction phenomenon is assumed to be affected by six different parameters. In the parametric study, these parameters are assumed to have various values in accordance with the engineering practices. A total of 1620 possible combinations of the parameter values are addressed in this study. 30 different numerical models are also generated as the 'free-field cases' to set a reference. The surface structure drift and acceleration amplifications are used as a measure to evaluate the dynamic interactions. The response (i.e., drifts and accelerations) amplifications are calculated as the ratio of the maximum surface structure response in any 'case' to the maximum surface structure response in corresponding free-field case. Variation of the response amplifications with any of the investigated parameters is addressed in this paper. The results obtained from the numerical analyses clearly reveal that the presence of a buried structure in the vicinity of a surface structure can cause both amplification and de-amplification of the surface structure responses, depending on the case parameters.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.35-44
• /
• 2009

Long stroke Fast Tool Servo (LFTS) with maximum stroke of $432{\mu}m$ is designed, manufactured and tested for fabrication of optical free-form surfaces. The large amount of stroke in LFTS has been realized by utilizing the hinge and lever mechanisms which enable the displacement amplification ratio of 4.3. In this mechanism the peculiar shape was devised for maximizing the displacement of end tip in LFTS and special mechanical spring has been mounted to provide the sufficient preload to the piezoelectric actuator. Also, its longitudinal motion of tool tip can be measured by capacitive type displacement sensor and closed-loop controlled to overcome the nonlinear hysteresis. In order to verify the static and dynamic characteristics of designed LFTS, several features including step response, frequency response and cut-off frequency in closed-loop mode were experimentally examined. Also, basic machining result shows that the proposed LFTS is capable of generating the optical free-form surface as an additional axis in diamond turning machine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.205-206
• /
• 2009

본 연구에서는 제진장치에 유도되는 변위응답을 증폭함으로써 기존 점탄성댐퍼의 효율을 극대화할 수 있는 변위증폭형 제진시스템에 대한 해석적 연구를 수행하였다. 변위증폭시스템은 지진응답에 의한 층간 횡변위를 약 2$\sim$4배 정도 증폭할 수 있어 기존 가새형태의 댐퍼보강에 비해 지진응답을 제어 하는데 능력이 매우 탁월할 것으로 분석되었다. 이를 해석적으로 검증하기 위해 본 연구에서는 각 시스템 별 변위증폭비 $\beta$의 일반식을 제안하였으며, 각 시스템의 시간이력해석 결과를 바탕으로 변위증폭비 $\beta$의 사용가능여부를 검토하였다.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.434-441
• /
• 2013

Bending motion has been used in the surgical instruments with bending structures and tendon mechanisms. A simplified bending angle amplification ratio between the proximal and distal bending joint was derived in this article. The bending structure of disk and rib in the proximal joint was analyzed based on finite element method with an emphasis on the circumferential uniformity of bending stiffness. Regarding the distal joint, optimal design and sensitivity analysis was done with four design variables of outer and inner diameter, rib height and rib width while maximizing the deformation under the stress distribution below the yield stress. Outer diameter and rib width are most critical to maximum deformation as the outer diameter and inner diameters are so to maximum equivalent stress.