• 제목/요약/키워드: amphiphilic polymer

검색결과 99건 처리시간 0.026초

Poly((R)-3-hydroxybutyric acid)/Poly(ethylene glycol) 양친성 블록 공중합체를 이용한 약물전달체용 고분자 미셀 (Polymeric Micelle Using Poly((R)-3-hydroxybutyric acid)/Poly(ethylene glycol) Amphiphilic Block Copolymer for Drug Delivery System)

  • 정관호;김영진
    • 폴리머
    • /
    • 제30권6호
    • /
    • pp.512-518
    • /
    • 2006
  • 양친성 블록공중합체는 생분해성 고분자인 poly((R)-3-hydroxybutyrie acid), PHB와 친수성 고분자인 poly(ethylene glycol), PEG를 이용하여 제조되었다. 미생물에 의해 생산된 분자량이 수십만인 PHB는 약물전달용 재료로 적합하지 않으므로 산 촉매 가수분해를 통해 분자량이 $3000{\sim}30000$을 가지도록 조절되었다. 공중합체를 수용액에 넣으면, 고분자들은 자기 조립에 의해 친수성인 PEG가 소수성인 PHB를 감싸는 형태의 고분자 미셀을 형성한다. 형성된 고분자 미셀은 생분해성과 생체적합성을 가지면서 생체 내에서 낮은 독성과 환자 친화적인 특성을 가지므로 약물 전달체로의 이용이 가능하다. 양친성 블록 공중합체는 PHB에 PEG를 도입한 것으로 에스테르교환(transesterification) 반응을 통해 유도되었다. PEG는 친수성 블록의 형성과 반응성을 향상시키기 위해 말단의 작용기를 개질한 후 사용되었다. 양친성 블록 공중합체 형성에 대한 열적 특성과 화학적 구조 분석은 DSC, FTIR, $^1H-NMR$을 사용하여 알아보았다. 임계 미셀 농도(critical micelle concentration, CMC)는 고분자 미셀이 형성되는 시점으로 형광 분광기를 사용하여 분석한 결과 $5{\times}10^{-5}g/L$ 부근에서 측정되었다. 수용액 상의 고분자 미셀은 냉동 건조 후, 분말형태의 나노입자를 얻었다. 고분자 미셀의 크기는 dynamic light scattering으로 측정한 결과 약 130 nm 정도로 나타났다. 또한 atomic force microscopy 측정을 통해 크기가 약 130 nm 정도인 구형 입자를 확인하였다. 나노입자가 형성된 고분자 미셀은 소수성 약물을 담지하여 수동적 표적지향형 약물 전달용 수송체로 이용이 가능할 것이다.

Preparation and Characterization of New Immunoprotecting Membrane Coated with Amphiphilic Multiblock Copolymer

  • Kang, Han-Chang;Bae, You-Han
    • Macromolecular Research
    • /
    • 제10권2호
    • /
    • pp.67-74
    • /
    • 2002
  • New immunoprotecting membranes were prepared by spin coating the amphiphilic random multiblock copolymers of poly(ethylene glycol) (PEG) and poly(tetramethylene ether glycol) (PTMEG) or poly(dimethyl siloxane) (PDMS) on porous Durapore(R) membrane. The copolymer coating was intended to make a biocompatible, immunoprotecting diffusional barrier and the supporting porous substrate was for mechanical stability and processability. By filling Durapore(R) membrane pores with water, the penetration of coating solution into the pores was minimized during the spin coating process. A single coating process produced a completely covered thin surface layer (~1 ${\mu}{\textrm}{m}$ in thickness) on the porous substrate membrane. The permselectivity of the coated layer was influenced by PEG block length, polymer composition, and thickness of the coating layer. A composite membrane with the coating layer prepared with PEG 2 K/PTMEG 2 K block copolymer showed that its molecular weight cut-of fat any 40 based on dextran was close to the molecular size of IgG (Mw = 150 kDa). However, IgG permeation was detected from protein permeation test, while glucose oxidase (Mw = 186 kDa) was not permeable through the coated membrane.

뫼스바우어 분광법에 의한 양친매성 고분자 망상구조 나노복합체의 자기적 성질 연구 (A Study on Magnetic Properties of Amphiphilic Polymer Networks Nanocomposites by Mossbauer Spectroscopy)

  • 윤인섭
    • 한국자기학회지
    • /
    • 제20권6호
    • /
    • pp.216-221
    • /
    • 2010
  • 본 연구에서는 dimethylacetamide(DMAc)와 toluen을 용매로 사용하여 만들어진 양친매성 urethan acrylate nonionomer(UAN) 선구고리를 기초로 하는 양친매성 고분자 망상구조 복합체에 철산화물을 주입시킨 나노복합체의 구조와 자기적성질 그리고 나노복합체에 존재하는 Fe 이온의 원자가 상태를 알아보기 위하여 전계방출주사전자현미경(FESEM)과 X-ray diffraction 그리고 Mossbauer spectrum을 측정하였다. 결과로부터 나노복합체 시료 내에 존재하는 모든 Fe이온은 $Fe^{3+}$의 상태로 존재하고 $Fe_2O_3$의 결정구조를 갖고 있음을 알 수 있으며, 시료 내에 철산화물 나노복합체가 형성되어 있음을 알 수 있었다. 그리고 urethan acrylate nonionomer(UAN) 선구 고리를 기초로 하는 양친매성 고분자 망상구조 복합체를 형성시키는 경우 용매로 DMAc를 이용하는 경우가 toluen을 이용한 경우 보다 더 미세한 나노구조를 형성함을 알 수 있으며, 시료들의 자기적 성질이 상온에서 상자성을 나타내는 것은 나노크기의 단일자구형성에 따른 초상자성효과에 의한 것임을 알 수 있었다.

pH-Induced Micellization of Biodegradable Block Copolymers Containing Sulfamethazine

  • Shim, Woo-Sun;Lee, Jae-Sung;Lee, Doo-Sung
    • Macromolecular Research
    • /
    • 제13권4호
    • /
    • pp.344-351
    • /
    • 2005
  • pH-sensitive block copolymers were synthesized by coupling reaction of sulfamethazine and amphiphilic diblock copolymer, and their micellization-demicellization behavior was investigated. Sulfamethazine (SM), a derivative of sulfonamide, was introduced as a pH responsive moiety while methoxy poly(ethylene glycol)poly(D,L-lactide) (MPEG-PDLLA) and methoxy poly(ethylene glycol)-poly($D,L-lactide-co-{\varepsilon}-caprolactone$) (MPEG-PCLA) were used as biodegradable amphiphilic diblock copolymers. After the sulfamethazine was carboxylated by the reaction with succinic anhydride, the diblock copolymer was conjugated with sulfamethazine by coupling reaction in the presence of DCC. The critical micelle concentration (CMC) and mean diameter of the micelles were examined at various pH conditions through fluorescence spectroscopy, dynamic light scattering and transmission electron microscopy. For MPEG-PDLLA-SM and MPEG-PCLA-SM solutions, the pH-dependent micellization-demicellization was achieved within a narrow pH band, which was not observed in the MPEG-PDLLA and MPEG-PCLA solutions. The micelle showed a spherical morphology and had a very narrow size distribution. This pH-sensitive block copolymer shows potential as a site-targeted drug carrier.

Invertible Nanofibers with Tunable Stiffness from Self-Assembly of an Amphiphilic Wedge-Coil Molecule

  • Kim, Jung-Keun;Lee, Eun-Ji;Lee, Myong-Soo
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.249-249
    • /
    • 2006
  • We have prepared an amphiphilic wedge-coil molecule consisting of a hydrophobic wedge-like segment and a hydrophilic poly(ethylene oxide) (PEO) segment. The wedge-coil block molecule self-assembles into cylindrical nanofibers in both polar as well as nonpolar solvents. Remarkably, the resulting nanofibers, as solvent polarity change from water to n-hexane, change from highly flexible coil-like to stiff rod-like characteristics. This dynamic switching in the stiffness of the nanofibers in response to solvent polarity is attributed to the structural inversion of cylindrical core from bulky dendritic segments with amorphous nature to crystallizable linear PEO segments.

  • PDF

알콕시 실란기능화 양친성 고분자 전구체를 이용한 유-무기 하이브리드 졸 제조 및 이를 이용한 발수 코팅 (Preparation of O-I hybrid sols using alkoxysilane-functionalized amphiphilic polymer precursor and their application for hydrophobic coating)

  • 이대곤;김나혜;김효원;김주영
    • 접착 및 계면
    • /
    • 제20권4호
    • /
    • pp.146-154
    • /
    • 2019
  • 본 연구에서는 소수성 PPO 사슬과 친수성 PEO 사슬들이 동시에 존재하고, 반응성 알콕시 실란기를 가지고 있는 알콕시 실란 기능화 양친성 고분자 전구체 (Alkoxysilane-functionalized Amphiphilic Polymer, AFAP)를 합성하여, 이를 TEOS과의 Hydrolysis- Polycondensation 반응에서 분산안정제 및 반응속도 조절제로 이용하여서 유-무기 하이브리드 나노입자가 안정적으로 분산된 졸 (Sol)을 제조하였다. 제조된 Sol에 불소 함유 실란화합물을 혼합·반응하여서 불소함유 유-무기 하이브리드 Sol을 제조하였고, 이를 유리 기재에 코팅하고 저온 경화를 통해 기재위에 경화필름을 형성하였다. 형성된 경화 필름은 AFAP 및 불소 함유 실란화합물의 첨가량, 용매 종류에 따라서 표면 경도 및 발수 특성이 변화하였다. 최적의 용매 및 불소 함유 실란화합물 첨가량에서 태양전지나 디스플레이에 적용가능한 투명하면서도 견고한 유-무기 하이브리드 형태의 코팅필름 형성이 가능하였다.

Facially Amphiphilic Architectures as Potent Antimicrobial Peptide Mimetics: Activity and Biophysical Insight

  • Tew Gregory N.
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.261-261
    • /
    • 2006
  • Membranes are a central feature of all biological systems and their ability to control many cellular processes is critically important. As a result, a better understanding of how molecules bind to biological membranes is an active area of research. In this report, the interaction between our biomimetic structures and different biological membranes is reported using both model vesicle and in vitro bacterial cell experiments. These results show that lipid composition is more important for selectivity than overall net charge. An effort is made to connect model vesicle studies with in vitro data and naturally occurring lipid compositions.

  • PDF

Interface control in polymer/clay nanocomposites

  • Lee, Sang-Soo;Park, Min;Kim, Junkyung
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 추계학술발표대회 논문집
    • /
    • pp.11-15
    • /
    • 2003
  • In order to suppress a repulsive interfacial energy between hydrophilic clay and hydrophobic polymer matrix in preparing a polymer/clay nanocomposite, a third component of amphiphilic nature such as poly($\varepsilon$-caprolactone) (PCL) was introduced into the model system of styrene-acrylonitrile copolymers (SAN)/Na-montmorillonite. Once $\varepsilon$-caprolactone was polymerized in the presence of Na-rnontmorillonite, the successful ring-opening polymerization of $\varepsilon$-caprolactone and the well-developed exfoliated structure of PCL/Na-montmorillonite mixture were confirmed, Thereafter, SAN was melt-mixed with PCL/Na-montmorillonite nanocomposite, which resulted in that SAN matrix and PCL fraction were completely miscible to form homogeneous mixture with retention of the exfoliated state of Na-montmorillonite, exhibiting that PCL effectively stabilizes the repulsive polymer/clay interface and contributes the improvement of mechanical properties of the nanocomposites.

  • PDF

Synthesis and Characterization of Poly(alkyl $\alpha$, L-glutamate-co-ethylene oxide)

  • Kim, Gunwoo;Kim, Jin-Yeol;Daewon Sohn;Lee, Youngil
    • Macromolecular Research
    • /
    • 제10권1호
    • /
    • pp.49-52
    • /
    • 2002
  • Rod-coil amphiphilic block copolymers, PALG-PEOs, poly(alkyl $\alpha$, L-glutamate-co-ethylene oxide)s, were successfully synthesized in three steps: 1) esterification of L-glutamic acid, 2) synthesis of ${\gamma}$-alkyl L-gultamate N-carboxyanhydride, and 3) polymerization of NCA monomers. These molecules form polymeric micelles with the hydrophobic core and hydrophilic corona in aqueous solution, which were characterized by light scattering and static fluorescence measurement.