• 한국항공운항학회지
• /
• 제30권2호
• /
• pp.24-33
• /
• 2022

This study analyzed and derived a plan to reduce fuel consumption of domestic aircraft. Specifically, this study tested fuel consumption in the short-distance flights of B737. Fuel consumption was calculated by substituting the simulation variable values into Matlab. The strength of this study is that the actual operating environment was reflected by collecting the B737 flight data. As a result of the study, the domestic fuel consumption rate in the computed flight plan was less than the current fuel consumption rate. Existing limitations of this study is that it was difficult to reflect the various variables constituting the flight environment, and thus there can be errors in the measurement of the fuel consumption. There are two major expected applications from this study. First, applying the plans from this study will lead to a reduction in the amount of fuel and thus provide positive economic effects for commercial airlines. Second, the plan from this study will provide a basis for pilots to predict fuel consumption more accurately. In conclusion, this study proposes a fuel saving plan with useful applications for pilots and airlines.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2357-2364
• /
• 2011

Diesel locomotive operates the generator with the power from the diesel engine, and it consists of the typical serial-hybrid system which operates the train wheels by converting its generated electric energy into the torque of DC (or AC) motor. However, the technology of locomotives is only focused on trains' controlling power generation mechanism. Hence, it is a current issue that the efficiency of its engine and its generator is relatively lower than that of auto vehicles'. Particularly, since there are no proper equipment to measure the amount of fuel which is essentially necessary for the efficient use of fuel, it is not easy to confirm the instant amount of fuel use as well as the exact average fuel consumption per an hour. Due to those difficulties, it is urgent to develop the device that measures the fuel consumption. Plus, this use of the developed measuring device allows the various and useful analysis relating to the fuel consumption, and this could lead to establishing the efficient driving pattern regarding to fuel saving. This device consists of two flux (fuel level) measuring censors, MCU for calculating the measured values, the information recorder for saving measured values, and the display device for indicating the fuel amount consumed during driving.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.153-161
• /
• 2004

A vehicle fuel economy is one of the most important issues in view of environmental regulation and customer's needs. In order to improve the vehicle fuel economy, great efforts has been carried out on the components bases. However, systematic analysis of vehicle fuel consumption is necessary for the further improvement of vehicle fuel economy. In this paper, a methodology for the breakdown of vehicle fuel consumption was studied and proposed for systematic analysis of the vehicle fuel economy. The energy equation for the vehicle power train was set up for the analysis of the vehicle fuel economy and simplified to be calculated or estimated using the measured data in a vehicle. The amount of fuel that was used in vehicle components under arbitrary driving conditions was quantified.

• 한국항공운항학회지
• /
• 제28권2호
• /
• pp.29-35
• /
• 2020

In this paper, we established a prediction model of fuel consumption at the aircraft's taxi operation. To look for countermeasures to reduce fuel consumption and carbon emissions, Airbus A380's actual ground taxi data was used. As a result, the number of stops or turnings during the taxi operation was not related to fuel consumption. It was confirmed that the amount of fuel consumption in the taxi operation was the taxi time and the thrust change. It can be confirmed that ground control optimization, which is the result of close cooperation between the control organization and the airline, is absolutely necessary to reduce taxi time and minimize the occurrence of thrust change events.

• Tribology and Lubricants
• /
• 제18권2호
• /
• pp.133-137
• /
• 2002

This paper reports on the effect of fuel additive friction modifier on the engine friction and fuel consumption. The test of engine friction and fuel consumption is performed for the each oils and fuels. The TFA4724 friction modifier is added in test oil and fuel. The test results show that total engine friction is a decrease of 0.7-2.0% compared with base fuel, and fuel consumption is improved by 0.3%. The amount of friction reduction corresponds to that of boundary friction loss term in ring-pack friction losses. From the results, it is thought that the additive friction modifier in the fuel is effective to reduce the boundary friction in ring-pack.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.69-76
• /
• 2010

This study was conducted to develop an index of fuel consumption to rate agricultural tractors by their fuel efficiencies. The fuel consumption index consisted of two components: basic and operational indexes. The basic index is to consider an average amount of fuel consumed by engine when it transmits 20 and 100% of the rated power. The operational index is to consider the fuel consumed by tractor for typical field operations: plowing, rotavating, and the remains. The equations and procedures to obtain these indexes were proposed. The method and fuel consumption rate to classify tractors into 5 grades were also proposed. The best 15% of the tractor models were rated as the first grade, 20% as the second grade, 30% as the third grade, 20% as the fourth grade, and 15% as the fifth grade in order of fuel efficiency. Using the fuel consumption index, the classification was conducted on 143 tractor models tested at the National Institute of Agricultural Engineering from 2000 to 2007. The proposed 5-grade system of classification using the fuel consumption index could be used to rate the fuel efficiency of 20-100 kW tractor models produced over past 10 years in Korea.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.126-131
• /
• 2008

The large buildings in Korea usually use the generators to control the peak load of electronic consumption during the summer. It is necessary that these generators emit carbon dioxide, since they use gas or gasoline for their fuel. This study is to analyze the data of electronic consumption and operation of the generators at COEX, one of the representative complex building clusters in Korea, and to compare to the amount of carbon dioxide emitted per 1kWh from the domestic power plant by analogizing the frequency of using the generator during the summer and the amount of fuel consumption by the capacity of the generator and estimating the amount of carbon dioxide emitted from the generator.

• 한국분무공학회지
• /
• 제22권4호
• /
• pp.203-209
• /
• 2017

The International maritime organization(IMO), in an effort to slow down the global warming, proposes reduction in ship's speed as a way to lower the rate emissions from ships. In addition, since ship's fuel cost have been increased, the shipping volumes, fuel-saving technology are being required urgently. Therefore, in this present study, a method of reducing the fuel cost that can improve the performance of the diesel engine was tried by introducing a predetermined amount (0.1~0.3% of the mass amount of fuel used) of hydrogen fuel additive. The experimental conditions of the test engine were 1500rpm and torque BMEP-10b ar. The engine performances (power output, fuel consumption rate, p-max, exhaust temperature) were compared before and after addition of hydrogen fuel additives. This experimental study confirmed reducing at least 2% fuel consumption and 2.19% NOx emission.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1243-1248
• /
• 2008

$CO_2$ emission amount and characteristics of combined heat and power (CHP) plant in industrial complex of Korea is evaluated by using the fuel analysis method. Fuel analysis methods of several foreign countries and developed one which is developed considering the operation characteristics of the surveyed CHP plants are used. The operation data is surveyed for all of the CHP plants in industrial complex and is composed of fuel consumption amount, generation, sale and efficiency of heat and electricity, condensed steam enthalpy, and etc of the each CHP.

• 수산경영론집
• /
• 제36권3호
• /
• pp.89-117
• /
• 2005

Currently, the tax - exempted vessel fuel is provided for commercial fishing in order to increase the competitive power of fishery production thorough the National Federation of Fisheries Cooperatives. The National Federation of Fisheries Cooperatives should predict the exact amount of fuel consumption for fishing every year to request the fuel from the government. Unfortunately, there is no sophisticated model to predict the tax - exempted vessel fuel consumption. In 2003, the consumption of the tax- exempted vessel fuel was only $25.1\%$ of the estimation amount by the National Federation of Fisheries Cooperatives. This causes an inefficiency in the petroleum management. Moreover, we need some data such as the annual average fishing hours, fishing days and fishing behavior to adopt a new policy regarding fishing. Up to now, the data have been obtained by survey with response in the fishery field. In the most case, we have a small number of data because we spend so much time and money consuming for collecting fishing data. As a result, the level of confidence of the data is associated with the sample size and normally low. In order to achieve more accurate data, we need to develope an efficient method for collecting fishing data. In this research, we proposed a new method to predict the tax- exempted vessel fuel consumption more exactly. The prediction results from the proposed method has been compared with the results from the current method. According to the results in this research, the method proposed here produced much better accuracy than the current method. In addition, we also proposed in the paper for collecting fishing data of the annual average fishing hours using the tax - exempted vessel fuel consumption and the gasoline consumption of vessel engine. The fishing data obtained by using the method proposed in this research could be much more efficient and accurate because it doesn't need to estimate from survey sample data.