• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.487-494
• /
• 2005

Nowadays a large amount of wastewater containing metal working fluids and cleaning agents is generated during the cleaning process of parts working in various industries of automobile, machine and metal, and electronics etc. In this study, aqueous or semi-aqueous cleaning wastewater contaminated with soluble or nonsoluble oils was treated using ultrafiltration system. And the membrane permeability flux and performance of oil-water separation (or COD removal efficiency) of the ultrafiltration system employing PAN as its membrane material were measured at various operating conditions with change of membrane pore sizes and soil concentrations of wastewater and examined their suitability for wastewater treatment contaminated with soluble or insoluble oil. As a result, in case of wastewater contaminated with soluble oil and aqueous or semi-aqueous cleaning agent, the membrane permeability increased rapidly even though COD removal efficiency was almost constant as 90 or 95％ as the membrane pore size increased from 10 kDa to 100 kDa. However, in case of the wastewater contaminated with nonsoluble oil and aqueous or semi-aqueous cleaning agent, as the membrane pore size increased from 10 kDa to 100 kDa and the soil concentration of wastewater increased, the membrane permeability was reduced rapidly while COD removal efficiency was almost constant. These phenomena explain that since the membrane material is hydrophilic PAN material, it blocks nonsoluble oil and reduces membrane permeability. Thus, it can be concluded that the aqueous or semi-aqueous cleaning solution contaminated with soluble oil can be treated by ultrafiltration system with the membrane of PAN material and its pore size of 100 kDa. Based on these basic experimental results, a pilot plant facility of ultrafiltration system with PAN material and 100 kDa pore size was designed, installed and operated in order to treat and recycle alkaline cleaning solution contaminated with deep drawing oil. As a result of its field application, the ultrafiltration system was able to separate aqueous cleaning solution and soluble oil effectively, and recycle them. Further more, it can increase life span of aqueous cleaning solution 12 times compared with the previous process.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.241-257
• /
• 2000

Autogenous periosteal grafts are an attractive alternative to existing barrier membrane materials since they meet the reqiurements of an ideal material. But no histological data are available on the effectiveness of periosteal membranes in the treatment of periodontal defects. The purpose of this study was to evaluate effect of autogenous periosteal graft on periodontal regeneration histologically. Class II furcation defects were surgically created on the second, third and the fourth premolars bilaterally in the mandibules of six mongrel dogs. The experimental sites were divided into three groups according to the treatment modalities; control group - surgical debridement only; Group I- autogenous periosteal membrane placement after surgical debridement; Group II-autogenous periosteal membrane placement after surgical debridement and bone grafting. The animals were sacrificed at 2, 4 and 12 weeks after periodontal surgery and the decalcified and undecalcified specimens were prepared for histological and histometrical analysis. Clinically all treated groups healed without significant problems. Under light microscope, at 2 weeks, control group showed significant apical epithelial migration and bone remodelling only below the notch area. But for the group I, II with autogenous periosteal graft, less apical migration of epithelium appeared and large amount of osteoid tissue showed above the notch area. Grafted periosteal membrane was indiscernable at 4 weeks, so periosteal membrane might be organized to surrounding tissues. Histometrically, at 4 and 12 weeks, all the test and control groups didn't show significant change of epithelial zone but new attachment level tended to be gained in the test groups than control group. These results suggest that autogenous periosteal grafts should be a good alternative for guided tissue regeneration.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.333-340
• /
• 2005

In this study, the radioprotective effects of Grifola umbellata hot water extracts (Gu-extract) on mice were investigated. Single pre-administration of Gu-extract increased the 40-day survival ratio of irradiated mice from 65.5％ to 78.6％. The growth of 3 week old male mice in the irradiated group was slightly retarded as compared to those of the control and Gu-extract treated mice. The average spleen and thymus weights of the irradiated mice were lower than those of the control and Gu-extract treated mice. The weight reduction of testis in the irradiated mice was significant. While it was relatively slight in the Gu-extract treated mice as compared to that of control mice. No significant difference in the weight was observed in heart, kidney or liver among three groups. The leukocytes of the Gu-extract treated mice did not decrease dramatically as in the irradiated group, but recovery patterns were similar in both groups. Reduction of erythrocytes were similar in both groups but its recovery occurred more rapidly in the extract treated group. The glucose level of the Gu-extract treated group did not change during the period examined, while it was still higher in the irradiated group than the level in the control group in two weeks. The cholesterol levels in the irradiated and the Gu-extract treated groups were higher than that of control group on day 7, but decreased to the level of the control group on day 14. No difference was observed in total protein amount of the serum among the three groups. SDS-polyacrylamide gel electrophoresis of the soluble proteins extracted from various organs did not reveal differences to any extent in all groups except in the livers of the irradiated and extract treated groups, in which some proteins were missing or less present.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.171-178
• /
• 2009

Water shortages are expected to be a major impact of climate change. This study examined the growth of Chinese cabbage seedling using reclaimed wastewater and waste nutrient solution as alternative irrigation resources. Generally, the concentration of nutrients, such as $K^+$, $NH_4^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$,$NO_3^-$, $PO_4^-$ and $SO_4^{2-}$, in waste nutrient solution was higher than that in wastewater. However, Chinese cabbage seedling irrigated with wastewater was supplied a higher concentration of $Na^+$ and $Cl^-$ than waste nutrient solution. The growth of Chinese cabbage seedling irrigated with waste nutrient solution was similar or higher than those irrigated with groundwater as control, while the growth of those irrigated with wastewater was similar to those irrigated with groundwater. The total nitrogen uptake in Chinese cabbage seedling irrigated with groundwater, waste nutrient solution from organic and inorganic hydroponic cultures, and wastewater was 5.47, 10.02, 5.20, and 4.59 mg/plant, respectively. The nitrogen uptake of Chinese cabbage seedling irrigated with waste nutrient solution from organic hydroponic substrates in a 50% lower dose than recommended was 8.34 mg/plant, which is higher than that of the cabbage irrigated with groundwater. Overall, the results suggest that waste nutrient solution and wastewater can be used as alternate water resources, and can allow a reduction in the amount of fertilizer needed to raise Chinese cabbage seedling.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.15-29
• /
• 2021

In the Arctic Ocean, the distribution of sea ice and ice sheets changes as climate changes. Because the distribution of ice cover influences the mineral composition of marine sediments, studying marine sediments transported by sea ice or iceberg is very important to understand the global climate change. This study analyzes marine sediment samples collected from the Arctic Ocean and infers the provenance of the sediments to reconstruct the paleoenvironment changes of the western Arctic. The analyzed samples include four gravity cores collected from the Araon mound in the Chukchi Plateau and one gravity core collected from the slope between the Araon mounds. The core sediments were brown, gray, and greenish gray, each of which corresponds to the characteristic color of sediments deposited during the interglacial/glacial cycle in the western Arctic Ocean. We divide the core sediments into three units based on the analysis of bulk mineral composition, clay mineral composition, and Ice Rafted Debris (IRD) as well as comparison with previous study results. Unit 3 sediments, deposited during the last glacial maximum, were transported by sea ice and currents after the sediments of the Kolyma and Indigirka Rivers were deposited on the continental shelf of the East Siberian Sea. Unit 2 sediments, deposited during the deglacial period, were from the Kolyma and Indigirka Rivers flowing into the East Siberian Sea as well as from the Mackenzie River and the Canadian Archipelago flowing into the Beaufort Sea. Unit 2 sediments also contained an extensive amount of IRD, which originated from the melted Laurentide Ice Sheet. During the interglacial stage, fine-grained sediments of Unit 1 were transported by sea ice and currents from Northern Canada and the East Siberian Sea, but coarse-grained sediments were derived by sea ice from the Canadian Archipelago.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.504-511
• /
• 2021

Purpose: This study examined the difference between the drainage volume, blood loss, transfusion rate, volume, and complications with or without an intra-articular (IA) tranexamic acid (TXA) injection among patients who underwent simultaneous bilateral total knee arthroplasty (SBTKA) with bilateral knee joint osteoarthritis, including patients who have contraindications of intravenous administration. Materials and Methods: Among patients who underwent SBTKA from April 2016 to December 2018, 139 patients injected with 3 g of TXA in each side through a drainage tube after joint capsule repair (group T), and 57 patients (group A) who underwent the procedure without TXA between October 2007 and August 2010 were tested. No significant difference in age and sex was observed between the two groups (p=0.572, 0.474). TXA was injected in patients with contraindications of intravenous administrations. Patients who underwent SBTKA with inflammatory arthritis were excluded from this study. The average amount of drainage, blood loss, transfusion rate, volume and daily average transfusion rate, and hemoglobin (Hb) change by the postoperative day were compared. Complications, such as deep vein thrombosis, pulmonary thromboembolism, myocardial infarction, cerebral infarction, and infection, were investigated. Results: The average total blood losses in groups A and T were 2195.32±1175.63 ml and 1145.09±382.95 ml, respectively, and the average total drain volume was 1,178.30±48.59 ml and 774.19±310.06 ml, respectively; both were significantly lower in group T (p=0.002, <0.001). The transfusion rates were 77.2% (44/57) and 0.7% (1/139), which were significantly lower in group T (p<0.001). The total average transfusion volume in groups A and T were 735.44±550.83 ml and 4.60±54.28 ml, respectively, which were significantly lower in group T (p<0.001). Hb tended to increase for three or four days after surgery in group A and group T. Regarding complications, deep vein thrombosis was encountered in two cases (1.4%), and pulmonary thromboembolism was noted in three cases (2.2%) in group T, but there were no cases in group A. No infections, cerebral infarction, or myocardial infarction occurred. Conclusion: In SBTKA, IA injections of TXA reduced the average drain volume, blood loss, transfusion rate, and volume significantly and did not increase the incidence of complications, even in patients with contraindications of intravenous administration.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.576-583
• /
• 2019

The effect of aeration process in causing changes in the prosapogenin content and the antioxidant activity of red ginseng powder extracts was investigated. With respect to the color change of the extracts, the L-value and b-value decreased significantly with the lapse of extraction time both with and without the aeration process. The a-value increased with the lapse of the extraction time in the non-aeration process but decreased in the aeration process. This result suggests that when the aeration process was performed, the lightness, yellowness, and redness decreased with the lapse of the extraction time, resulting in a darker color. The total polyphenolic and total flavonoid contents were the highest at 0.84 and 0.96 mg Gallic Acid Equivalent (GAE)/mL, 21.77 and 21.93 mg GAE/mL at 24 h and 36 h, respectively for the aerated red ginseng powder extracts. The DPPH, ABTS, H₂O₂ scavenging activity, and reducing power were measured to confirm the antioxidant effects of red ginseng powder extracts after the aeration process. Thus, the antioxidant activity was increased in the aerated red ginseng powder extracts. In addition, when comparing the contents of Rb1, Rg1, and Rg3, the content of Rg3 was significantly different, and it was confirmed that a large amount was produced in the aerated red ginseng extracts. These results indicate that the red ginseng extracts subjected to the aeration process are superior than the ones processed by the non-aeration process.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.277-283
• /
• 2011

In this study, engineering grade and high intensity reflective sheets were prepared with glass beads and their reflection performance and physical properties were investigated. The reflective sheets prepared by using glass beads are divided into enclosed or encapsulated lens type, depending on whether the glass beads are open in air or not. Because of an extra layer on the glass bead surface, the enclosed lens type reflective sheets show very little change in the properties by bad weather conditions, compared to encapsulated lens type reflective sheets. Optimization of the amount of glass beads on the surface was carried out, which determines the retroreflective properties. Enclosed and encapsulated lens type reflective sheets with various colors were prepared and their coefficients of retroreflection were determined. The encapsulated type reflective sheet with white color shows a coefficient of retroreflection of $210.4cd/1x{\cdot}m^2$, which is higher than the enclosed type ($74cd/1x{\cdot}m^2$). Effect of washing on the reflective property and adhesive power of the reflective sheets was investigated, and it is found that the number of glass beads decreased with washing and the aluminum layer deposited was damaged extensively in the encapsulated lens type reflective sheets.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.206-214
• /
• 2014

This study is to evaluate how different bearing surface angles of abutment screw affect the mechanical stability of the joint in the conical seal design implant system. Materials and Methods: Internal connection type regular implants, two-piece cemented type abutments and tungsten carbide/carbon-coated titanium alloy abutment screws were selected. Titanium alloy screws with conical ($45^{\circ}$) and flat ($90^{\circ}$) head designs which fit on to abutment were fabricated. The abutments were tightened to implants with 30 Ncm by digital torque gauge. The loading was applied once to the central axis of abutment. The mean axial displacement was measured using micrometer before and after the tightening and loading (n = 5). The abutment was tightened to implants with 30 Ncm and T-shape stainless steel crown was cemented. Then the change in the amount of reverse-torque was measured after the repeated loading to the central axis, and the place 5 mm away from the central axis. Compressive bending and fatigue strength were measured at the place 5 mm away from the central axis (n = 5). Results: Both groups showed the largest axial displacement when abutment screw tightening and total displacement was greater in the flat head group compared to conical head group (P < 0.05). However, there were no significant differences in reverse torque value, compressive bending and fatigue strength (P > 0.05). Conclusion: Within the limitations of this study, the abutment screw head design had no effect on two groups regarding the joint stability, however the conical head design affected the settlement of abutment resulting in the reduced total displacement.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.191-200
• /
• 2017

Proper packaging design can meet both the environmental and economic aspects of packaging materials by reducing the use of packaging materials, waste generation, material costs, and logistics costs. Finite element analysis(FEM) is used as a useful tool in various fields such as structural analysis, heat transfer, fluid motion, and electromagnetic field, but its application in the field of packaging is still insufficient. Therefore, the application of FEM to the field of packaging can save the cost and time in the future research because it is possible to design the package by computer simulation, and it is possible to reduce the packaging waste and logistics cost through proper packaging design. Therefore, this study investigated the FEM papers published in Korea for the purpose of helping research design using FEM program in the field of packaging in the future. In this paper, we analyzed the 29 papers that were directly related to the analysis of FEM papers published in domestic journals from 1991 to 2017. As a result, we analyzed the research topic, FEM program, and analysis method using each paper, and presented the direction that can be applied in future packaging field. When the FEM is applied to the packaging field, it is possible to change the structure and reduce the thickness through the stress and vibration analysis applied to the packaging material, thereby reducing the cost by improving the mechanical strength and reducing the amount of the packaging material. Therefore, in the field of packaging research in the future, if the FEM is performed together, economical and reasonable packaging design will be possible.