• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1085-1093
• /
• 1998

Amorphous alumina powder prepared by the fast calcination of aluminum trihydroxide(Al(OH)3 gibbsite) for 0.5 second at 580$^{\circ}C$ was investigated rehydration propeties. Phase composition crystal size and mor-phology surface area pore volume and pore size distribution of pesudo-boehmite and bayerite crystals changed with temperature time water/alumina ratio and particle size when amorphous alumina rehydrated with water. Phase compositions were examined with XRD and DTA and crystal sized morphologies were investigaed with SEM and TEM. Also rehydration properties of amorphous alumina were in-vestigated by measuring the surface area pore volume and pore size distribution.

• 천문학회지
• /
• 제49권4호
• /
• pp.127-136
• /
• 2016

We investigate optical properties of amorphous alumina (Al2O3) dust grains in the envelopes around O-rich asymptotic giant branch (AGB) stars using laboratory measured optical data. We derive the optical constants of amorphous alumina over a wide wavelength range that satisfy the Kramers-Kronig relation and reproduce the laboratory data. Using the amorphous alumina and silicate dust, we compare the radiative transfer model results with the observed spectral energy distributions. Comparing the theoretical models with observations on various IR two-color diagrams for a large sample of O-rich AGB stars, we find that the amorphous alumina dust (about 10-40%) mixed with amorphous silicate better models the observed points for the O-rich AGB stars with thin dust envelopes.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.978-985
• /
• 2001

The amorphous alumina was obtained by flash calcination of Bayer gibbsite[$Al(OH)_3$aluminum trihydroxide]. Rehydration and pore characteristics of $r-A1_2O_3$ prepared from rehydrated amorphous alumina were investigated. Crystal phases of pseudo-boehmite and bayerite were changed when amorphous alumina was hydrated at various conditions such as time, the ratio of water/alumina and pH. Specific surface areas and pore volumes of $r- A1_{2O}_3$ were influenced by the reaction time, water/alumina and PH of rehydration. The total pore volume of $r-A1_{2O}_3$increases with increasing the reaction time and ratio of water/alumina. Especially, the pure pseudo-boehmite of single phase could be prepared, when amorphous alumina was hydrated in the range of pH 6.5-8.0 in water/alumina= 10 at $90^{\circ}C$ for 7hr. The $r-Al_{2O}_3$, obtained by calcination of the prepared pseudo-boehmite at $500^{\circ}C$ for 2hrs, is characterized by the specific surface area of $265m^2$/g, total pore volume of $0.75cm^3$/g.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.179-183
• /
• 2005

A photodiode capable of obtaining a sufficient photo/ dark current ratio at both forward bias state and reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as an insulator barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. A good quality alumina $(Al_2O_3)$ film is formed by oxidation of aluminum film using electrolyte solution of succinic acid. Alumina is used as a potential barrier between amorphous silicon and aluminum. It controls dark-current restriction. In case of photodiodes made by changing the formation condition of alumina, we can obtain a stable dark current $(\~10^{-12}A)$ in alumina thickness below $1000{\AA}$. At the reverse bias state of the negative voltage in ITO (Indium Tin Oxide), the photo current has substantially constant value of $5{\times}10^{-9}$ A at light scan of 100 1x. On the other hand, the photo/dark current ratios become higher at smaller thicknesses of the alumina film. Therefore, the alumina film is used as a thin insulator barrier, which is distinct from the conventional concept of forming the insulator barrier layer near the transparent conduction film. Also, the structure with the insulator thin barrier layer formed near the lower electrode, opposed to the ITO film, solves the interface problem of the ITO film because it provides an improved photo current/dark current ratio.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.81-90
• /
• 1989

High purity alumina and amorphous silica were prepared from Ha-dong kaolin by means of appliance of sulfuric acid. The effect of sulfuric acid concentration, reaction temperature and reaction time on the formation of aluminum sulfate was investigated. The precipitation conditions ofaluminum sulfate from the sulfuric acid solution with ethanol and ammonium hydroxide were deteremined. In the optimum condition, the conversion of aluminum oxide in kaolin to aluminum oxide powder was 85.0 percent. Alumina powder was prepared by calcination of the precipitates, and its purity was 99.0 percent.

• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.193-200
• /
• 1988

침전법에 의해서 pH가 7, 9, 10, 11인 조건에서 생성된 알루미늄 수산화물을 출발물질로 하여 열처리에 따른 알루미나 분말의 특성을 연구하였다. $600^{\circ}C$에서 2시간 동안 열처리하였을 때 비정질 알루미늄 수산화물의 결정수가 탈수된 후에 생성된 최초의 상은 비정질 알루미나의 비표면적은 감소하였다. 비정질 알루미늄 수산화물을 제외한 나머지 알루미늄 수산화물로부터 결정수의 탈수는 비표면적을 증가시켰으며 AlOOH 형태의 수산화물의 존재비가 클수록 전이 알루미나 존재영역까지는 비표면적이 더 크게 나타났다. $\alpha-Al_2O_3$로의 전이속도는 동일온도에서 pH=7 > pH=10 > pH=9 > pH=11의 순서로 일어났으며, 생성된 $\alpha-Al_2O_3$ 분말의 morphology는 알루미늄 수산화물의 외형을 남긴 형골입자(skeleton particle였다. 또한, 열처리 온도의 증가와 $\alpha-Al_2O_3$로의 전이가 일어남에 따라 비표면적의 감소와 더불어 입자성장이 일어나다.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.92-100
• /
• 1996

Amorphous alumina(AA) the precursor of ${\gamma}$-alumina for catalyst support was made in the newly designed ball filled heating column. Some properties of AA as precursor were investigated. In observation of microstruc-ture and pore structure of AA and its derivatives scanning electronic microscope(SEM) and transmission electronic microscope(TEM) were used. It was found that the width of one particle in AA was 45~60$\AA$ and the average distance among the particles ranged 9~12 $\AA$ which suggested a micropore structure. When AA was reacted with water the shape of the surface was found to be altered and acicular bioehmite was formed inside AA which contributed inproved formability. Pore distribution was evaluated for the three samples of AA ground and granulated lump and La2O3 coated alumina. Acid sites were quantitatively determined by ammonia TPD method and the effect of impurity of Na on acid sites was discussed. Water adsorption capacity was evaluated in terms of a desiccant.

• Journal of information and communication convergence engineering
• /
• 제1권1호
• /
• pp.23-26
• /
• 2003

A photodiode capable of obtaining a sufficient photo/dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as a schottky barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. Growth of high quality alumina($Al_{2}O_{3}$) film using anodizing technology is proposed and analyzed by experiment. We have obtained the film with a superior characteristics

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.977-988
• /
• 1995

Several oxide (ZrO2, Al2TiO5, reactive Al2O3) and nonoxide (SiC, Si3N4, "ALON" (5AlN.9Al2O3)) additives were used as a microfiller for alumina based LCC (Low-Cement-Castable). High temperature prooperties (HMOR, softening under load) and the phase changes of developed LCC on various sintering temperatures were examined. In addition, thermal shock test and corrosion test were accomplished. Based on these data the effects of each microfiller on the properties of LCC were established comparing to those of the commercial LCC with amorphous silica as a microfiller. The castables, containing reactive alumina, ZrO2 and "ALON" (5AlN.9Al2O3) as a first portion, exhibited considerably higher HMOR-values over 100$0^{\circ}C$, better creep behavior, and thermal shock resistance than those of castables with amorphous silica. The LCC with 5% Al2TiO5 showed no corrosion against molten aluminum.nst molten aluminum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.670-673
• /
• 2002

Powder synthesis using the alkoxy precursor technique exhibits processing flexibility not available in traditional high temperature solid-state reaction. With proper process control, impurities can be reduced to very low levels. The major distinction of the present work lies in the method of accomplishing the hydrolysis reaction. In the present case, water is not added to the system. Instead the metal alkoxide/alcohol solution is heated to a temperature at which water is formed through dehydration of the alcohol solvent, causing precipitation of the corresponding metal oxide (hydroxide). The present method provides a means of producing amorphous alumina.