• 한국물환경학회지
• /
• 제22권4호
• /
• pp.711-719
• /
• 2006

The effluent from anaerobic digestion process of slurry-type piggery waste has a characteristic of very low C/N ratio. Because of high nitrogen content, it is necessary to evaluate nitrogen removal alternative rather than conventional nitrification-denitrification scheme. In this study, two parallel treatment schemes of SBR-like partial nitritation reactor coupled with anaerobic ammonium oxidation (ANAMMOX) reactor, and a nitritation reactor followed by nitrite denitrification process were evaluated with a slurry-type piggery waste. The feed to reactors adjusted with various $NH_4-N$ and organics concentration. The nitrite accumulation was successfully accomplished at the loading rate of about $1.0kgNH_4-N/m^3-day$. The $NO_2-N/NH_4-N$ ratio 1~2.6 in nitritated effluent that operated at HRT of 1 day indicated that SBR-like partial nitritation was applicable to ANAMMOX operation. Meanwhile, the nitrite accumulation of 87% was achieved at SBR operated with HRT of 3 days and $0.4mgO_2/L$ for denitritation. Experimental results further suggested that HRT (SRT) and free ammonia(FA) rather than DO are an effective control parameter for nitrite accumulation in piggery waste.

• Membrane and Water Treatment
• /
• 제8권6호
• /
• pp.517-528
• /
• 2017

This study evaluates the performance of membrane bioreactor (MBR) coupled with a modified walnut shell granular activated carbon (WSGAC) for tannery wastewater treatment. For this purpose, a pilot with overall volume of 80L and 12 hours hydraulic retention time (HRT) is operated in three scenarios. Here, the chemical oxidation demand (COD) of wastewater is reduced more than 98% in both C:N ratios of 13 (S1) and 6.5 (S2). This performance also remains intact when alkalinity depletes and pH reduces below 6 (S3). The ammonium removal ranges between 99% (S2) and 70% (S3). The reliability of system in different operating conditions is due to high solids retention time and larger flocs formation in MBR. The average breakthrough periods of WSGAC are determined between 15 minutes (S2) and 25 minutes (S1). In this period, the overall nitrate removal of MBR-WSGAC exceeds 95%. It is also realized that adding no chemicals for alkalinity stabilization and consequently pH reduction of MBR effluent (S3) can slightly lengthen the breakthrough from 15 to 20 minutes. Consequently, MBR can successfully remove the organic content of tannery wastewater even in adverse operational conditions and provide proper influent for WSGAC.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.97-101
• /
• 1999

No-till direct seeding cultivation of rice has major advantages such as saving of labor and cost by eliminating tillage, preparation of seed bed and trans-planting procedure compared to the conventional transplanting cultivation. A field experiment was conducted to evaluate the effects of straw treatment and nitrogen levels on the rice growth in no-till direct-seeding cultivation. Rice straw, vetch straw, and the mixture of both of the straws were mulched on the surface of soil before seeding while 4 levels of nitrogen fertilizer, 0, 7, 9, and 11 kkg/10a respectively, were applied at 3 split times, 3-weeks after sowing, 5-weeks after sowing and the panicle initiation stage. Mulching of vetch straw significantly reduced seedling establishment of rice which may be attributed to low oxidation-reduction potential of soil by vetch mulching treatment. Vetch straw increased the concentration of soil ammonium leading to an extension of the greenish leaf to panicle initiation stage. Agronomic nitrogen use efficiency (AD $E_{N}$) in heavy-mixed straw mulching plots was lower than other treatments. Grain yield and AU $E_{N}$ in the vetch treatment were less affected by fertilized N levels. Conclusively, it is suggested that heavy straw mulching was not efficient for rice seedling establishment and nitrogen usage.e.

• 생약학회지
• /
• 제20권2호
• /
• pp.101-109
• /
• 1989

Purification of polyphenol oxidase(PPO) from Korean native tobacco variety leaves was carried out through the procedure of acetone preciptation, ammonium sulfate fractionation, and Sephadex G-150 gel filtration, resulting in a 84-fold increase in specific activity. The enzyme was stable in a range of pH 7.5 to 8.0 with an optimum of pH 7.5. The optimum temperature for the enzymic reaction was about $60^{\circ}$. It was thermostable with a half-life equal to 20 min at $70^{\circ}$. Km values for (+)-catechin and pyrogallol were $1.6{\times}10^{-3}$ and $0.5{\times}10^{-3}M$, respectively. It possesses high catecholase activity but little or no cresolase activity. Lineweaver-Burk analysis of inhibition data revealed that the inhibition of (+)-catechin oxidation by potassium cyanide, 4-nitrocatechol, cystein and 2-mercaptoethanol was competitive with Ki values of $1.1{\times}10^{-6}$, $1.8{\times}10^{-6}$, $8.9{\times}10^{-6}$ and $1.3{\times}10^{-5}$, respectively.

• Carbon letters
• /
• 제7권1호
• /
• pp.1-8
• /
• 2006

The activated carbon "C" was obtained by carbonization followed by activation with steam at 40% of burn-off. Oxidized carbons C-N, C-P and C-H were obtained by oxidizing the activated carbon C with concentrated nitric acid, ammonium peroxysulfate and hydrogen peroxide, respectively. The textural properties of the carbons were determined from nitrogen adsorption at 77 K. The acidic surface functional groups were determined by pH titration, base neutralization capacity and electrophoretic mobility measurements. The cation exchange capacities of un-oxidized and oxidized carbons were determined by the removal of Cu(II) and Ni(II) from their aqueous solutions. The surface area and the total pore volume decreased but the pore radius increased by the treatment of activated carbon with oxidizing agents. These changes were more pronounced in case of oxidation with $HNO_3$. The surface pH of un-oxidized carbon was basic whereas those of the oxidized derivative were acidic. The removal of Cu(II) and Ni(II) was pH dependent and the maximum removal of the both ions was obtained at pH of 5-6. Cu(II) was more adsorbed, a phenomenon which was ascribed to its particular electronic configuration.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.339-346
• /
• 2019

In this research, applicability of electrochemical technology in removing nitrogenous compounds from solid waste landfill leachate was examined. Novel cathode material was developed at laboratory by introducing a Cu layer on Al substrate (Cu/Al). Al and mild steel (MS) anodes were investigated for the efficiency in removing nitrogenous compounds from actual leachate samples collected from two open dump sites. Al anode showed better performances due to the effect of better electrocoagulation at Al surface compared to that at MS anode surface. Efficiency studies were carried out at a current density of $20mA/cm^2$ and at reaction duration of 6 h. Efficiency of removing nitrate-N using Al anode and developed Cu/Al cathode was around 90%. However, for raw leachate, total nitrogen (TN) removal efficiency was only around 30%. This is due to low ammonium-N removal as a result of low oxidation ability of Al. In addition to the removal of nitrogenous compounds, reactor showed about 30% removal of total organic carbon. Subsequently, raw leachate was diluted four times, to simulate pre-treated leachate. The diluted leachate was treated and around 88% removal of TN was achieved. Therefore, it can be said that the reactor would be good as a secondary or tertiary treatment step in a leachate treatment plant.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.701-708
• /
• 2018

Chemical batch tests were conducted to investigate the amount of nutrients that were released from the wasted activated sludge during microwave heating. For this study, three types of activated sludge were obtained from $A_2/O$, MLE and oxidation ditch (OD) processes. Polyphosphate-accumulating organisms in the activated sludge have a unique trait: they releases phosphate from the cell when they are exposed to high temperatures. The sludge obtained from the $A_2/O$ process released the largest amount of phosphate, followed by those from the MLE and OD processes. The release of phosphate increased with increasing polyphosphate content in the sludge under strongly alkaline or acidic conditions. Furthermore, ammonia and heavy metals were released with phosphorous. The largest amount of ammonia was observed from the sludge obtained from the MLE process. The release of heavy metals strongly depends on the pH conditions. Therefore, the chemical analysis results strongly suggest that both phosphorus and ammonia react with $Mg^{2+}$ or $Ca^{2+}$ to form metal complexes such as magnesium ammonium phosphate or hydroxyapatite under alkaline conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권1호
• /
• pp.34-44
• /
• 2021

Acid mine drainage (AMD) resulting from pyrite oxidation in mining areas, subsequently leads to soil acidification accompanied by lowering pH and high concentration of metals and metalloids in its surrounding environment. Regarding to this, the microbial amelioration has been considered as a promising option for a more cost-effective and eco-friendlier countermeasure, compared to the use of alkaline chemicals. This study was aimed to evaluate influencing factors in microbially-mediated amelioration of acidic soil spiked by simulated AMD. For this, microcosm experiments were conducted by acid-neutralizing bacterial consortium (dominated by Klebsiella sp. and Raoultella sp.) under the various conditions of AMD spikes (0-2,500 mg SO42-/L), together with acidic mine soil (0-100 g) or sphagnum peat (0-5 g) in the 200 mL of nutrient medium. The employed bacterial consortium, capable of resisting to high level of sulfate concentration (up to 1,500 mg SO42-/L) in low pH, generated the ammonium while concomitantly reduced the sulfate, subsequently contributing to the effective soil stabilization with an evolution of soil pH up to neutral. Furthermore, it demonstrates that suitable condition has to be tuned for successful microbial metabolism to facilitate with neutralization during practical application.

• 한국물환경학회지
• /
• 제38권4호
• /
• pp.171-176
• /
• 2022

Recently, an autotrophic single-stage nitrogen removal (ASSNR) process based on the anaerobic ammonium oxidation (ANAMMOX) reaction has been proven as an economical ammonia treatment. It is highly evident that double-layered gel beads are a promising alternative to the natural biofilm for ASSNR because of the high mechanical strength of poly(vinyl alcohol) (PVA)/alginate structure and efficient protection of ANAMMOX bacteria from dissolved oxygen (DO) due to the thick outer layer. However, the thick outer layer results in severe mass transport limitation and consequent lowered bacterial activity. Therefore, the effects of the thickness of the outer layer on the overall reaction rate were tested in the biofilm model using AQUASIM for ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB) and ANAMMOX bacteria. A thickness of 0.5~1.0 mm is preferred for the maximum total nitrogen (TN) removal. In addition, a DO of 0.5 mg/L resulted in the best total nitrogen removal. A higher DO induces NOB activity and consequent lower TN removal efficiency. The optimal density of AO B and NO B density was 1~10% for a 10% ANAMMOX bacterial in the double-layered PVA/alginate gel beads. The real effects of operating parameters of the thickness of the outer layer, DO and concentrations of biomass balance should be intensively investigated in the controlled experiments in batch and continuous modes.

• 대한환경공학회지
• /
• 제28권11호
• /
• pp.1213-1221
• /
• 2006

본 연구에서는 혐기성 암모늄 산화(ANAMMOX)반응을 유도하기 위해 양조폐수를 처리하는 메탄 생성 반응조의 입상 슬러지를 혐기성 반응기에 식종하였다. 암모니아성 질소($NH_4^+-N$)와 아질산성 질소($NO_2^--N$)를 1:1의 비율로 인공폐수를 조제하여 반응조를 운전하였다. 실험기간은 반응기의 유입 질소농도 조건에 따라 3개의 phase로 구분하였다. 각 phase별 유출수의 질소농도, COD, 알칼리도, 발생 가스 조성을 측정하여 처리효율을 평가하였다. Phase 1에서는 유입 $NH_4^+$-N $NO_2^-$-N를 각각 1.91 $gN/m^3{\cdot}d$부터 14.29 $gN/m^3{\cdot}d$까지 점차 높였으며 Phase 2에서 각 질소의 부하를 23.81 $gN/m^3{\cdot}d$, Phase 3에서는 19.05 $gN/m^3{\cdot}d$로 하여 운전하였다. 아질산성 질소($NO_2^-$-N)는 전 기간에 걸쳐 99%까지 제거 되었으며, 암모니아성 질소($NH_4^+-N$)의 제거율은 각 phase별로 변동폭이 높았으며 이 중 Phase 2에서 최대 75%까지 제거되었다. 한편 각 phase별 반응조의 미생물 군집 변화는 16s rDNA방법을 이용하여 분석하였다. 입상 슬러지의 접종 초기인 Phase 1의 경우 메탄생성이 일정하게 유지되었으며 메탄균과 탈질균이 공존하였다. Phase 2의 경우 아질산성 질소($NO_2^--N$)와 암모니아성 질소($NH_4^+-N$)의 제거율이 각각 99%와 75%까지 증가하였으며 이 때 ANAMMOX균의 존재가 확인되었다. Phase 3의 경우 외부 공기 유입으로 인하여 암모니아성 질소(NH4+-N)의 제거율은 급격히 감소하였으나 미생물 군집 중 여전히 ANAMMOX균이 관측되었다.