• Title/Summary/Keyword: ammonium oxidation

Search Result 145, Processing Time 0.027 seconds

Determination of the Optimum NH$_3$-N/NO$_2$-N Ratio by Anaerobic Batch Test in Anaerobic Ammonium Oxidation Process (혐기성 암모늄 산화공정에서 혐기성 회분식 실험에 의한 NH$_3$-N/NO$_2$-N의 최적비 산정)

  • Lee, Hwan-Hee;Kim, I-Jung;Jung, Jin-Young;Kim, Jee-Hyung
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.30 no.7
    • /
    • pp.700-704
    • /
    • 2008
  • Nitrite and free ammonia have been known as substrate inhibitors in anaerobic ammonium oxidation. To reduce inhibitory effect of these substrates, the NH$_3$-N/NO$_2$-N ratio in the influent could be properly controlled in anaerobic ammonium oxidation process. Five kinds of NH$_3$-N/NO$_2$-N ratio were assayed in batch to find optimum NH$_3$-N/NO$_2$-N ratio, curtailing substrate inhibition. As the results of batch test, the highest T-N removal efficiency of 88% was obtained at 1.00 : 1.30 of NH$_3$-N/NO$_2$-N ratio. In addition, rate constants for ammonium and nitrite in zero-order kinetics were found to be the highest values as 7.66 mg/L$\cdot$hr and 11.89 mg/L$\cdot$hr at 1.00 : 1.30 ratio, respectively. However, as for the specific anammox activity, the ratio of NH$_3$-N/NO$_2$-N ratio was recommended as 1 : 1.15 which can maintain the highest SAA during continuous operation and preclude the accumulation of nitrite in the reactor.

Piggery Waste Treatment using Partial Nitritation and Anaerobic Ammonium Oxidation (부분질산화와 혐기성 암모늄산화를 이용한 돈사폐수처리)

  • Hwang, In-Su;Min, Kyung-Sok;Lee, Young-Ok
    • Journal of Korean Society on Water Environment
    • /
    • v.22 no.4
    • /
    • pp.599-604
    • /
    • 2006
  • Nitrogen removal with the combined SHARON (Single reactor system for high ammonium removal over nitrite)ANAMMOX (Anaerobic ammonium oxidation) process using the effluent of ADEPT (Anaerobic digestion elutriated phased treatment) slurry reactor with very low C/N ratio for piggery waste treatment was investigated. For the preceding SHARON reactor, ammonium nitrogen loading and removal rate were $0.97kg\;NH_4-N/m^3_{reactor}/day$ and $0.68kg\;NH_4-N/m^3_{reactor}/day$ respectively. In steady state, bicarbonate alkalinity consumption for ammonium nitrogen converted to $NO_2-N$ or $NO_3-N$ was 8.4 gram per gram ammonium nitrogen. The successive ANAMMOX reactor was fed with the effluent from SHARON reactor. The loading and removal rate of the soluble nitrogen defined as the sum total of $NH_4-N$, $NO_2-N$ and $NO_3-N$ in ANAMMOX reactor were $1.36kg\;soluble\;N/m^3_{reactor}/day$ and $0.7kg\;soluble\;N/m^3_{reactor}/day$, respectively. The average $NO_2-N/NH_4-N$ removal ratio by ANAMMOX was 2.41. Fluorescence in situ hybridization (FISH) analysis verified that Candidatus Kuenenia stuttgartiensis were dominate, which means that they played an important role of nitrogen removal in ANAMMOX reactor.

Surface Modification of High Si Content Al Alloy by Plasma Electrolytic Oxidation (플라즈마 전해 산화 공정을 이용한 고 실리콘 알루미늄 합금의 표면 산화막 형성)

  • Kim, Yong Min;Hwang, Duck Young;Lee, Chul Won;Yoo, Bongyoung;Shin, Dong Hyuk
    • Korean Journal of Metals and Materials
    • /
    • v.48 no.1
    • /
    • pp.49-56
    • /
    • 2010
  • This study investigated how the surface of Al-12wt.%Si alloy modified by the plasma electrolytic oxidation process (PEO). The PEO process was performed in an electrolyte with sodium hexametaphsphate as a conducting salt, and the effect of ammonium metavanadate on variations in the morphology of electrochemically generated oxide layers on the alloy surface was investigated. It is difficult to form a uniform passive oxide layer on Al alloys with a high Si content due to the differences in the oxidation behavior of the silicon-rich phase and the aluminum-rich phase. The oxide layer covered the entire surface of the Al-12WT.%Si alloy uniformly when ammonium metavanadate was added to the electrolyte. The oxide layer was confirmed as a mixture of $V_2O_3$ and $V_2O_5$ by XPS analysis. In addition, the oxide layer obtained by the PEO process with ammonium metavanadate exhibited a black color. Application of this surface modification method is expected to solve the problem of the lack of uniformity in the coloring of oxide layeres caused by different oxidation behaviors during a surface treatment.

A Study on the Synthesis of Ammonium Dinitramide (ADN(Ammonium Dinitramide)의 합성)

  • Chung, Kyoo Hyun;Sim, Hyun Ho
    • Journal of the Korean Chemical Society
    • /
    • v.41 no.12
    • /
    • pp.661-665
    • /
    • 1997
  • Recently ADN was disclosed to replace AP or AN as a solid oxidizer. 3-N,N-Dinitraminopropanitrile, a key intermediate in the preparation of ADN, was synthesized from bis(2-cyanoethyl)amine by the sequence: nitration of bis(2-cyanoethyl)amine followed by decyanoethylation by base and the second nitration with NO2BF4. 3-N-Nitro-bis(2-cyanoethyl)amine could also be obtained by the oxidation of the corresponding N-nitroso compound.

  • PDF

Nitritation Characteristics Depending on Influent Nitrogen Concentration in a Biological Aerated Filter (Biological Aerated Filter에서 유입 질소농도에 따른 아질산화 특성)

  • Yoo, Ik-Keun
    • Journal of Korean Society on Water Environment
    • /
    • v.30 no.1
    • /
    • pp.1-7
    • /
    • 2014
  • The purpose of this study was to investigate the nitrification characteristics of biological aerated filter (BAF) packed with ceramic media, especially focusing on nitrite build-up during nitrification. When increasing the nitrogen load above $1.63kgNH_4{^+}-N/m^3{\cdot}d$, ammonium removal efficiency decreased to less than 60% and the nitrite ratio ($NO_2{^-}-N/NO_x-N$) of higher than 75% was achieved due to the inhibitory free ammonia (FA, $NH_3-N$) concentration and oxygen limitation. FA inhibition, however, is not recommended strategy to promote nitrite build-up since FA concentration in the reactor is coupled with decreased ammonium removal efficiency. Nitrite ratio in the effluent was also affected by aeration rate and influent ammonium concentration. Ammonium oxidation was enhanced at a higher aeration rate regardless of influent ammonium concentration but, the nitrite ratio was dependent on both aeration rate and influent ammonium concentration. While a higher nitrite ratio was obtained when BAFs were fed with $50mgNH_4{^+}-N/L$ of influent, the nitrite ratio significantly decreased for a greater influent concentration of $200-300mgNH_4{^+}-N/L$. Taken together, aeration rate, influent ammonium concentration and FA concentrations kept in the BAF were found to be critical variables for nitrite accumulation in the BAF system.

Anaerobic Ammonium Oxidation Process in an Upflow Anaerobic Sludge Blanket Reactor with Granular Sludge Selected from an Anaerobic Digestor

  • Tran, Hung-Thuan;Park, Young-Joo;Cho, Mi-Kyeoung;Kim, Dong-Jin;Ahn, Dae-Hee
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.11 no.3
    • /
    • pp.199-204
    • /
    • 2006
  • The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with $NH_4^+\;and\;NO_2^-$ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescence in situ hybridization (FISH) technique. By the last month of operation, the consumed $NO_2^--N/NH_4^+-N$ ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influent-shutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.

Effects of Initial Concentration of Ammonium Ion and Active Nitrifiers on Nitrification (암모늄 이온 및 질산화균의 초기 농도가 질산화에 미치는 영향)

  • Kim, Jung Hoon;Kim, Young Ju;Park, Hung Suck
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.4B
    • /
    • pp.421-426
    • /
    • 2006
  • The effect of initial concentration of ammonium ion ($N_0$) and active nitrifiers ($X_0$) on nitrification was examined by continuous monitoring of the ammonium removal rate. The concentration of the active nitrifiers in the culture sludge, measured by the oxygen uptake rate (OUR), was found to be 42.8% of the culture sludge. Experiments were carried out under different ratios of $N_0/X_0$, viz., 0.025 to 0.493. The results from this study show that the oxidation rate was similar under the same $N_0/X_0$ ratio despite different initial concentration of ammonium ion ($N_0$) and active nitrifiers ($X_0$). Moreover, the Contois kinetic expression which includes biomass concentration, was found to describe the mechanism behind nitrification process. The ammonium oxidation rate ($q_{Nmax}$) and half saturation constant per unit activated nitrifiers ($K_N{^{\prime}}$) were theoretically determined using the Contois expression. These values were found to be 4.32 gN/gVSS/day and 0.013 gN/gVSS respectively.

Effect of Temperature on Nitrification in a Recirculating Aquaculture System (순환여과시스템에서 온도가 질산화 반응에 미치는 영향)

  • PARK Jong Ho;LEE Won Ho;YEON Ik Jun;CHO Kyu Seok
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.37 no.1
    • /
    • pp.13-17
    • /
    • 2004
  • The effects of temperature on nitrification of enriched nitrifiers were investigated by using kinetics and thermodynamics method through the batch test. Aquaculture recirculating water, which was sampled at Chung Cheong Buk-Do Inland Fisheries Research Institute, was analized to observe the characteristics of nitrification. Temporal variation of ammonium, nitrite and nitrate concentration was measured at batch experiments. Activation energy was calculated using Arrhenius equation with the oxidation rates of specific ammonium or nitrite ion. These oxidation rates were measured at temperature range of $6-35^{\circ}C$ and ammonium concentration range of 0.2-1.8 mg/L. Two distinct activation energy of Nitrosomonas sp. at temperature $6-15^{\circ}C\;and\;15-35^{\circ}C$ was 93.1 and 25.0 KJ/mol, respectively. Nitrate accumulation was observed at temperature over $15^{\circ}C.$

Effect of Ammonium Persulfate Concentration on Characteristics of Cellulose Nanocrystals from Oil Palm Frond

  • ZAINI, Lukmanul Hakim;FEBRIANTO, Fauzi;WISTARA, I Nyoman Jaya;N, Marwanto;MAULANA, Muhammad Iqbal;LEE, Seung Hwan;KIM, Nam Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.47 no.5
    • /
    • pp.597-606
    • /
    • 2019
  • Cellulose nanocrystals (CNCs) were successfully isolated from oil palm fronds (OPFs) using different concentrations of ammonium persulfate (APS), and their characteristics were analyzed by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, and thermogravimetric analysis (TGA). APS oxidation effectively isolated CNCs with rod-like morphology in nanometer scale. The dimensions of the CNCs decreased with increasing APS concentration. FTIR and XRD analyses revealed that all the CNCs showed crystals in the form of cellulose I without crystal transformation occurring during APS treatment. The relative crystallinity of the CNCs increased with increasing APS concentration, whereas their thermal stability decreased. An APS concentration of 2 M was found to be optimal for isolating the CNCs.