• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.866-870
• /
• 2008

In this study, we designed cold gas propulsion system with minimum 0.25 mm nozzle and micro-thrust measurement system to analyze flow characteristic of micro propulsion system in ambient and vacuum condition. Argon and Nitrogen are used for propellant and the result of experiments is compared with CFD analysis and theory. But there is a point where reduced scale versions of conventional propulsion systems will no longer be practical. Therefore, a fundamentally different approach to propulsion systems was taken. That is thermal transpiration based micro propulsion system. It has no moving parts such as lubricants, pressurizing system and can pump the gaseous propellant by temperature gradient only(cold to hot). We are advancing basic research of propulsion system based on thermal transpiration in vacuum conditions and had tried experiment process and theoretical access in advance. To characterize membrane of Knudsen pump, we select Polyimide material that has low thermal conductivity(0.29 W/mK) and can stand high temperature($300^{\circ}C$) for long time. And we fabricated hole diameter 1, 0.5, 0.2, 0.1 mm using precision manufacturing. Experimental results show that pressure gradient efficiency of Knudsen pump is increased to maximum 82% according to Knudsen number and thick membranes are more effective than thin membranes in transition flow regime.

• 한국분무공학회지
• /
• 제28권2호
• /
• pp.75-88
• /
• 2023

In this paper, the atomization characteristics of bi-swirl coaxial injectors for a 420 N-class bipropellant thruster were investigated. Three types of injectors, namely closed-type, open-type, and screw-type, were manufactured and designed to have the same spray angle and injection pressure drop. Water was used as a simulant, and cold-flow tests were conducted under ambient temperature and pressure conditions. Since the inner and outer injectors were designed to be the same type, only the inner fuel injectors that were easy to measure were used. Using a phase doppler particle analyzer, the velocity and diameter of atomized droplets were measured. Closed-type swirl injector exhibited droplet distributions with relatively high velocities and small SMD compared to the other two injectors. Open-type swirl injector formed droplets with reverse velocities in the center region and had a large recirculation zone. Screw-type swirl injector showed a sharp decrease in droplet velocity and size with radial distance from the liquid film breakup point. For the same design requirements, the closed-type swirl injector has superior atomization performance.

• 생태와환경
• /
• 제46권4호
• /
• pp.588-595
• /
• 2013

본 연구에서는 봄철 저수온기 팔당호 수역의 식물플랑크톤을 이용하여 수온과 $CO_2$ 증가가 식물플랑크톤 군집에 미치는 영향을 분석하였다. 2012년 3월 팔당호 경안천하류 광동교 부근의 현장수를 이용하여 수온증가와 $CO_2$ 농도증가를 네 가지 실험군, (1) Control; 저온(현장수온)과 저농도(공기중) $CO_2$ ($6{\pm}2^{\circ}C$, 400 ppm), (2) T1; 저온과 고농도 $CO_2$ ($6{\pm}2^{\circ}C$, 800 ppm), (3) T2; 고온과 저농도 $CO_2$ ($20{\pm}2^{\circ}C$, 400 ppm), (4) T3; 고온과 고농도 $CO_2$ ($20{\pm}2^{\circ}C$, 800 ppm)으로 하여 각각 실험하였다. 가장 높은 조류성장을 보인 실험군은 T1으로 현장 온도조건에 적응한 조류 군집에 $CO_2$를 첨가한 결과이다. 현장수의 주요 우점종은 Cyclotella meneghiniana로 나타났고, 시간이 진행됨에 따라 고온 실험군(T2, T3)에서는 중심돌말류 Cyclotella meneghiniana에서 깃돌말류 Fragilaria capucina var. gracilis로 우점종의 천이가 나타났다. 모든 실험군에서 규조류가 우점하였고, 고온 실험군 T2, T3에서 배양 후반기에 남조류가 출현하였다. 결론적으로, 저수온기 수온증가는 팔당호 식물플랑크톤 군집구조 변화에 영향을 주었으며, $CO_2$ 농도 증가는 식물플랑크톤의 성장을 촉진시켰다. 본 연구의 결과는 기후변화에 따라 담수생태계의 식물플랑크톤의 성장과 군집변화의 잠재성을 보여주었으며, 앞으로 보다 심도 있는 연구의 필요성을 제기하였다.

• 항공우주기술
• /
• 제9권1호
• /
• pp.143-150
• /
• 2010

본 연구는 다양한 찬물 온도에 손가락을 침수시켰을 경우 추위유발성혈관확장(Cold-induced vasodilation)이 어떻게 나타나며, 이 반응이 재발현되는지 평가하는데 목적을 두었다. 이를 위해 10명의 건강한 대학생($21.4{\pm}2.5$ yrs, $175.8{\pm}4.1$ cm, $69.6{\pm}7.6$ kg, $11.2{\pm}3.7$ %fat)이 두 번의 실험에 참가하였다. 첫 번째 실험은 상온환경에서 다섯 번의 실험과정 반복으로 이루어졌다. 실험과정은 $43^{\circ}C$의 물에 오른손 가운데 손가락을 5분 동안 담갔다가, 그 후 25분 동안 상온에서 휴식을 가지고, 그 다음 무작위로 물 온도 5, 8, 11, 14, 또는 $17^{\circ}C$ 중 하나에 손가락을 담갔다. 한 과정이 끝나면 다른 수온에서 같은 방식으로 실험이 진행되었다. 재발현 반응을 평가하기 위해 첫 실험 후 최소 5일 후에 같은 방법으로 두 번째 실험이 진행되었다. 실험 중 심박수, 직장온도, 손톱주위온도가 매 6초마다 측정되었다. 결론적으로 재현성에는 최대손가락온도(Tfmax)와 Tfmax-물온도(Tw)에서 재생산 반응을 보였다. 추위자극에 따른 CIVD의 반응은 추위자극이 높을수록 최소손가락온도(Tfmin)와 Tfmax의 반응은 높게 나타났으며, 추위자극이 낮을수록 Tfdiff의 반응은 증가되었다. 그러나 모든 반응시간에는 유의한 차이는 보이지 않았다.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.983-991
• /
• 1996

This study focusses on how the skirt or slacks wearing habit affects the female physiology in her daily life. The healthy female college students have been trained to wear either skirt (group A) or slacks (group B) from late August to early January in order to study the effects of clothing habit on thermoregulatory responses. Also, the themoregulatory responses have been compared the healthy students groups with a physical trained students group (group C) to examine the effects of clothing habit. The changes in body temperatures of students have been studied under the cool environmental condition (15$\pm$1$^{\circ}C$, 60$\pm$5% RH, 0.25 m/sec). The results were as follows: 1. Rectal temperature of the group A was 0.4$^{\circ}C$ lower at 36.9$^{\circ}C$ than that of the group B The groups A and B were found identical before the training, while the groups A and C were identical after the training. 2. Mean skin temperature of the group A was 1.2$^{\circ}C$ lower than that of the group B. The groups A and C were identical after the training. 3. The thermal sensation was reflected to be cool by the group A and to be cold by the group B. As for the humidity sensation, the group A felt average, whereas the group B reported between average and slightly humid. In the case of comfort sensation, the group A felt average, while the group B felt between average and slightly uncomfortable. In summary, the 18 weeks of training has provided the skirt group an improved acclimatization to the cold environment . This group also showed an insulative-hypothermic adapta lion in a cold ambient temperature, as was the case for the physical trained group. It is concluded that wearing a skirt for a long period of time can be helpful to human body through gaining of thermoregulatory abilities.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.388-392
• /
• 2016

A cold roll-bonding process was applied to fabricate an AA1050/AA6061/AA1050 laminate complex sheet. Two AA1050 and one AA6061 sheets of 2 mm thickness, 40 mm width and 300 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 1.2 mm in thickness by conventional rolling. The rolling was performed at ambient temperature without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 5.0 m/sec. The AA1050/AA6061/AA1050 laminate complex sheet fabricated by roll bonding was then hardened by natural aging T4) and artificial aging (T6) treatments. The microstructures of the as-roll bonded and the age hardened Al complex sheets were revealed by optical microscope observation; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the as-roll bonded complex sheet was found to increase by 2.9 times compared to that value of the starting material. In addition, the hardness of the complex sheets increased with cold rolling for AA1050 and age-hardening treatment for AA6061, respectively. After heat treatment, both AA1050 and AA6061 showed typical recrystallization structures in which the grains were equiaxed; however, the grain size was smaller in AA6061 than in AA1050.

• 한국운동역학회지
• /
• 제29권4호
• /
• pp.227-235
• /
• 2019

Objective: The purpose of this study was to evaluate the effect of passive-acute temperature therapy of the femoral muscle and dynamic warm-up on the countermovement jump performance. Method: Twenty male track and field athletes from national team underwent three treatments applied on the femoral muscles; cold temperature treatment, thermal treatment and dynamic warm-up. The variables extracted at 2 time points (pre-measurement and post measurement) were the temperature of the left and right femoral muscle, displacement & velocity of centre of mass, peak power out, range of motion and moment & power of the knee joint. Results: There was a statistically significant difference in the temperature of the femoral muscle according to measurement time which was high in the order of thermal treatment, dynamic treatment and cold treatment. The jump height was the highest in the dynamic warm-up with no statistically significant difference for the range of motion of the knee joint. The peak power out at dynamic warm-up and the power of the knee joint were statistically significant according to the treatment and measurement time. Conclusion: Local cold and thermal treatment of femoral muscles at ambient temperature did not improve jump performance, while dynamic warm-up was considered to be effective for maintaining the performance of the activities that require strong muscular power.

• 한국의류산업학회지
• /
• 제1권1호
• /
• pp.43-49
• /
• 1999

This study conducted 4 different kinds of underwear materials, which were A (Cotton 100%), B (Wool 100%), C (Cotton/Wool, 50/50%) and D (Acrylic/Cotton, 50/50%) and were done in a climate chamber under cold ambient $10{\pm}1^{\circ}C$, $40{\pm}5%RH$ by 6 male subjects who were in good health. Physiological parameters such as rectal and local skin temperature(forehead, forearm, hand, trunk, thigh, leg, foot, back and chest), heart rate, body weight loss, clothing microclimate, blood lactic acid concentration, and wearing sensation were measured. Started with a 15-min rest period, 15-min of exercise 1 (the condition of 4.5 mile/hr walking speed equivalent to with 8.5 Kcal energy consumption on the treadmill) period, 15-min rest period, exercise 2 (after 3minutes warming-up at 3.0. 3.7, 4.5. 5.2. 6.0, 6.7 mile/hr) until exhaustion period, and final 15-min of recovery period were performed. The results were as follows: The lowest mean skin temperature was acrylic/cotton in order of wool > cotton/wool > cotton > acrylic/cotton (F=13. 79. p<0.00l). Most of all skin temperature by parts of body had turned out in sequence of temperature wool > cotton/wool > acrylic/cotton > cotton. Fore arm part showed highest temperature about $32.43^{\circ}C$ on wool and had a tendency approximately $1.8^{\circ}C$ higher than cotton which had the lowest temperature, and had the biggest difference among garments in terms of skin temperature. The back temperature within clothing showed about $2^{\circ}C$ higher than the chest temperature within clothing. but the back humidity within clothing showed about 4~12% higher than the chest humidity within clothing. Body weight loss by each garment was this sequence; cotton > acrylic/cotton > wool > cotton/wool.

• 한국작물학회지
• /
• 제36권3호
• /
• pp.214-219
• /
• 1991

관계수온에 따른 벼 품종들의 출수일수, 주간엽 전개 소요일수, 주간총엽수 등을 조사하여 수온과 벼 품종들의 출수특성과의 관계를 구명하고자, 삼강벼 등 12개 품종을 공시하고, 찬물계속 흘려대기를 실시하여 동일 포장 내에서 수온의 차이를 둔 벼 내냉검정포에서 시험을 수행한 결과를 요약하면 다응과 같다. 1. 담수심을 5 cm로하여 찬물계속흘려대기를 실시할 때 관계수 정체시간은 3 시간 이었으며, 포장 내의 수온은 찬물유입구로부터 배수고를 향하여 거리가 밀어질수록 상승되었다. 대체로 기온이 높아짐에 따라 수온도 높아지는 경향이었고, 배수구 쪽의 수온은 벼의 영양생장기에는 기온보다 높았지만, 생식성장기에는 낮았다 2. 수온 상승에 따라서 주간엽의 전개속도는 빨라지는 경향이었으며, 품종별로는 복광벼, 상풍벼, YR3486-16-2 등은 민감하였으나 Janack, 밀양4002 등은 다소 둔감한 편이었다 3. 영양생장기에 비하여 생식성장기에 1엽전개 소요일수가 두드러지게 늘어난 품종은 Janack, Paro-white 등이 었 다. 4. 1엽전개 소요일수의 품종간 차이는 수온이 높았던 영양생장기보다 상대적으로 수온이 낮았던 생식성장기에 켰다 5. 수온이 비슷한 조건일 때 수온의 차이에 의한 전체 공시품종의 평균 1엽전개소요일수의 영양생장기와 생식생장기의 생육단계간 차이는 인정되지 않았으며, 수온 13$^{\circ}C$-23$^{\circ}C$ 범위에서는 1$^{\circ}C$ 상승에 따라 1.3 일만큼 감소하는 것으로 추정 되었다. 6. 수온에 따른 주간총엽수의 증감은 품종간에 차이가 있었다. 수온이 상승됨에 따라 1 엽이 증가된 품종은 복광벼, 광명벼, China 988, YR3486-16 등이었고, 주간총엽수의 변화가 없었던 품종은 소백벼, Paro-white, 상풍벼, 풍산벼, 삼강벼, 밀양4002 등이었다 7. Janack 품종은 수온의 상승에 따라 주간총엽수가 증가되면서, 출수일수도 늘어났지만, 그밖의 품종들은 수온 차이에 의한 주간총엽수의 변화와는 관계없이 수온 상승에 따라 출수일수가 단축되었는데, 그 정도는 품종마다 달랐다.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.5-10
• /
• 2009

Urea-SCR system, the selective catalytic reduction using urea as reducing agent, is a powerful technique to reduce nitrogen oxides(NOx) emitted from diesel engines. However, a tank of urea(32.5 wt%)-water solution can be frozen in low ambient temperature levels of below $-11^{\circ}C$. The purpose of this study is to understand freezing and melting phenomena of the urea-water solution, and its can be applied to get the urea-water solution from frozen it within 5 minutes after cold start. Factors considered were the type of heater and the urea tank shape. From the results, it was found that melting volume of cartridge heater B during 5 minutes of heating period was 83ml when supplying electric power of 150W. Horizontal heater B, which was put in the narrow bottom space of the tank T1, had fast melting characteristics.