• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.228-239
• /
• 2007

Statement of problem: Following tooth loss, the edentulous alveolar process of maxilla is affected by irreversible reabsorption process, with progressive sinus pneumatization leads to leaving inadquate bone height for placement of endosseous implants. Grafting the floor of maxillary sinus by sinus lifting surgery and augmentation of autologous bone or alternative bone material is a method of attaining sufficient bone height for maxillary implants placement and has proven to be a highty successful. Purpose: This study was undertaken to clarify the morphometric characteristics of inferior maxillary sinus and alveolar process for installation of implants. Material and method: Nineteen skulls (37 sinuses, 10M / 9F) obtained from the collection of the department of anatomy and cell biology of Hanyang medical school were studied. The mean age of the deceased was 69.9 years (range 44 to 88 years). The distance between alveolar border and inferior sinus margin at each tooth, the height of alveolar process and the thickness of cortical bone of the outer and inner table of alveolar process and the inferior wall of maxillary sinus were measured. Results and Conclusion: 1. The septum of inferior maxillary sinus were observe 28 sides (76.%) and located at the third molar (52.6%) and the second molar (26.3%). The deepest points of inferior border of maxillary sinus were located the first or second molar. The distance between alveolar margin and the deepest point of inferior maxillary sinus is $9.7{\pm}4.9mm$. 2. The length of the outer table of alveolar process were $4.9\sim28.2mm$ and the shortest point was between the first and the second molors. The thickness of them were $0.9\sim3.2mm$. The length of the inner table of alveolar process were $7.4\sim25.8mm$ and the shortest point was between the first and the second molars. The thickness of the were $0.9\sim4.6mm$. The results of this study are useful anatomical data for installing of maxillary implants.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.367-376
• /
• 2018

Objective: This study was performed to investigate the changes in alveolar bone after maxillary incisor intrusion and to determine the related factors in deep-bite patients. Methods: Fifty maxillary central incisors of 25 patients were evaluated retrospectively. The maxillary incisors in Group I (12 patients; mean age, $16.51{\pm}1.32years$) were intruded with a base-arch, while those in Group II (13 patients; mean age, $17.47{\pm}2.71years$) were intruded with miniscrews. Changes in the alveolar envelope were assessed using pre-intrusion and post-intrusion cone-beam computed tomography images. Labial, palatal, and total bone thicknesses were evaluated at the crestal (3 mm), midroot (6 mm), and apical (9 mm) levels. Buccal and palatal alveolar crestal height, buccal bone height, and the prevalence of dehiscence were evaluated. Two-way repeated measure ANOVA was used to determine the significance of the changes. Pearson's correlation coefficient analysis was performed to assess the relationship between dental and alveolar bone measurement changes. Results: Upper incisor inclination and intrusion changes were significantly greater in Group II than in Group I. With treatment, the alveolar bone thickness at the labial bone thickness (LBT, 3 and 6 mm) decreased significantly in Group II (p < 0.001) as compared to Group I. The LBT change at 3 mm was strongly and positively correlated with the amount of upper incisor intrusion (r = 0.539; p = 0.005). Conclusions: Change in the labial inclination and the amount of intrusion should be considered during upper incisor intrusion, as these factors increase the risk of alveolar bone loss.

• 대한치과교정학회지
• /
• 제47권5호
• /
• pp.313-322
• /
• 2017

Objective: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. Methods: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. Results: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. Conclusions: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.

• Imaging Science in Dentistry
• /
• 제50권3호
• /
• pp.217-226
• /
• 2020

Purpose: The purpose of this study was to analyze the quantity and quality of the mandibular anterior alveolar bone in terms of alveolar width, density, and total alveolar height (TAH) based on dental status, gender, and age. Additionally, this study aimed to quantitatively evaluate the available alveolar height for graft harvesting (AHGH) and examine its variability based on the aforementioned factors. Materials and Methods: This retrospective cone-beam computed tomographic study included a total of 100 subjects. On the basis of gender, dental status, and age, the scans were divided into 3 primary groups and 8 subgroups. The mandibular alveolar width and density were measured 5 mm mesial to the mental foramen bilaterally and at the midline. The TAH was measured at the midline, and the AHGH was measured as the midline distance between 5 mm apical to the root of the canines and 5 mm superior to the lower border. Results: The mandibular alveolar width was statistically similar between dentulous and edentulous patients (P>0.05). A significantly greater density was observed at the midline in edentulous patients (P<0.05). The TAH was significantly greater in edentulous male patients than in edentulous female patients (P<0.05). Dentulous and male patients had significantly greater AHGH than edentulous and female patients, respectively (P<0.05). Conclusion: Based on the data evaluated in this study, it can be concluded that the mandibular symphyseal area has adequate bone quality and quantity for bone graft harvesting for dental implant therapy.

• Imaging Science in Dentistry
• /
• 제49권1호
• /
• pp.9-17
• /
• 2019

Purpose: This study aimed to introduce a novel method to evaluate the alveolar bone and interdental septum in the anterior mandible using cone-beam computed tomography (CBCT). Materials and Methods: Fifty-six CBCT scans from adult patients were selected. The CBCT scans were obtained before and after orthodontic treatment. The following measurements were taken: width of the alveolar bone and the interdental septum, height of the interdental septum, height of the bone plates, distance between the cementoenamel junction and marginal bone crests, and vertical positioning of the mandibular incisor, using the lingual plane as a reference. To test the reproducibility and the stability of the lingual plane, a triangle was traced in the anterior mandible. The intra-class correlation coefficient(ICC) was used to determine intra- and inter-examiner agreement. The paired Student t-test was used to evaluate the area of the triangle and the reproducibility of all measurements. Results: The ICC was excellent for the alveolar bone and dental measurements (0.9989 and 0.9977, respectively), as well as for the interdental septum (0.9987 and 0.9961, respectively). The area of the triangles showed stability in the lingual plane (P>0.05). For the alveolar bone, mandibular incisor, and interdental septum measurements, no statistically significant differences were found between the 2 examiners(P>0.05), confirming the technical reliability of the measurements. Conclusion: The method used in this study provides a valid and reproducible assessment of alveolar bone dimensions in the anterior mandible measured on CBCT images.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.50-59
• /
• 2010

Implant placement is frequently complicated and challenging because of the poor quality and inadequate height of bone. Clinicians should consider various surgical procedures to overcome the problems. We report a case with various surgical procedures used such as inferior alveolar nerve repositioning, sinus bone graft, and autogenous block bone graft using the coronoid process and ramus to overcome severe vertical and horizontal alveolar bone atrophy.

• 치과방사선
• /
• 제21권2호
• /
• pp.377-392
• /
• 1991

The aim of this study was to investigate the thickness of alveolar lamina dura and alveolar bone height by the change of periodontal status. The periapical radiograms of the 853 cases were taken by paralleling technique. The conclusions from this study were as follows: 1. In the normal periodontal status, the alveolar lamina dura was the thickest at alveolar crest, followed by apex, midroot, and the average thickness of the posterior teeth was thicker than that of the anterior teeth. 2. In Russel's Periodontal Index 0 and 1, no significant differences of thickness were found to be 3 areas. In Russel's Periodontal Index 2 and 6, the thickness of alveolar lamina dura at alveolar crest was decreased, only. 3. In Russel's Periodontal Index 0 and 1, distance from the cemento-enamel junction to the alveolar crest was within 1.5㎜. In Russel's Periodontal Index 2 and 6, the distance was 3. increased over 1.5㎜.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• Journal of Periodontal and Implant Science
• /
• 제42권1호
• /
• pp.20-24
• /
• 2012

Purpose: The purpose of this study was to evaluate the soft tissue and bone change around two adjacent implants in onestage implant surgery. Methods: Eleven subjects (7 males, 4 females) who were needed placement of 2 adjacent implants in the molar area were included. The two implants were placed with the platform at the level of the alveolar crest. The interproximal bone between the 2 implants was not covered with gingiva. After surgery, an alginate impression was taken to record the gingival shape and radiographs were taken to evaluate implant placement. Using a master cast, the gingival height was measured at baseline, 4 weeks, and 12 weeks. In the radiograph, the alveolar bone level was measured at the mesial and distal side of both implants at baseline and 12 weeks. Results: The exposed bone was covered with gingiva at both 4 and 12 weeks. Loss of alveolar bone around implants was found in all areas. The alveolar bone level in the exposed bone area did not differ from that in the non-exposed area. Conclusions: This study showed that the alveolar bone level and gingival height around 2 adjacent implants in the exposed bone area did not differ from that in unexposed bone area.

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.421-430
• /
• 1997

치조골은 치아의 치배와 치근의 발육에 따라 발달하고 치아의 맹출에 따라 골침착이 계속된다. 골의 성분은 끊임없이 소실되고 다시 첨가되며 균형이 깨지는 경우 치조골의 흡수 또는 과다 침착이 일어난다. 교정치료에 의한 치아의 재위치시 치조골의 흡수로 인한 치조골높이의 상실이 나타날 수 있으며 이의 평가를 위한 여러 선학들의 연구가 시도되었다. 임상연구방법중 재현성과 규격성이 가능한 방사선사진을 이용하게 되었고 그중 치조골의 변화에 관한 객관적인 평가를 위한 구치부의 교익사진을 사용하게 되었다. 교정치료 전후에 치조골높이가 어느 정도의 변화를 나타내는지를 알아보기 위해 치료전 구치부의 관계가 Cl I인 10-13세(평균 12.2세)아동을 대상으로 구강내 상태가 양호하며 선천적 결손이 없으며 심한 치주질환이나 전신질환이 없고, 치료전후의 교익사진이 있는 환자를 무작위로 총 20명을 축출하여 연구대상으로하였고 상하악 좌우측의 견치, 소구치, 구치부의 치아의 이동량, 장축의 변화와 치주높이의 변화를 분석한 결과 다음과 같은 결과를 얻었다. 1. 상하악좌우측의 견치, 소구치, 구치부의 치아의 이동량, 장축의 변화와 치주높이의 변화량을 나타내는 계측치의 평균 표준편차와 중앙값을 구하였다. 2. 상하악좌우측의 치조골의 높이의 치료전후 계측치비교시 거의 모든 계측치에서 하악보다는 상악에서 변화량이 크게 나타났다. 3. 근원심간의 비교시 3D3과 4M3은 상하 좌우측 모두 원심측이 4M3과 4D3은 근심측이, 4D3과 5M3은 원심측이, 5M3과 5D3은 근심측이, 5D3과 6M3은 근심측이 변화량이 큰 것으로 나타났다. 4. 상하악좌우측의 견치, 소구치, 구치부의 치아의 이동량(TX,TY)과 장축의 변화 (A)를 나타내는 계측항목의 비교시 좌우측 모두 상악의 34TX, 34TY, 34A가 크게 나타났고 이 부위의 치조골높이의 변화가 다른 부위에 비해 컸다.정중구개봉합부를 급속확장시킨 후 신생골 형성은 보정 14일이 지난 후부터 관찰되기 시작하였으며, 보정 28일이 지난 후에는 신생골형성이 훨씬 왕성하게 진행되었음을 관찰할 수 있었다.위 판별식으로 본 연구대상을 판별한 결과, 전체정판별률은 $92.86\%$였다.왜소치가 발견되지 않았다. 작은 군(S군)사이에 수평적 골격관계는 차이가 없으나 수직적 골격관계는 L군이 S군에 비해 하악골이 하방으로 많이 성장한 경향을 보여주었다. 하지만 성인 남자군인 G2군에서는 이부비율에 따른 안면골격의 뚜렷한 형태적 차이를 보여주지 않았다.교하면 bisphosphonate는 indomethacin에 비해 골흡수 억제효과가 더 크며 투여시간에 따른 제약도 더 적은 것으로 사료된다.ubstance P는 인간의 치주인대세포에서 교원질 합성을 억제하였다. 이 효과는 procollagen mRNA와 gelatinase 생성의 정상(steady-state) 수준의 변화 때문이 아니라 prostaglandin 생성과 연관이 있음을 알았다.EX>는 골기질의 주성분인 type I 교원질의 합성을 선택적으로 억제하는 기능과 alkaline phosphatase의 활성을 크게 증가시키지 못한 점 등으로 미루어 볼 때, 골개조를 억제하는 방향으로 작용한다고 볼 수 있으며, 교정치료 과정중 골개조를 억제하는 부위에서 사용을 시도해 볼 수 있겠다.>신뢰구간은 상악에서 정상교합군은 $79.5-81.0\%$, 비발치군은 $81.6-84.9\%$, 발치군은 $70.1-72.2\%$로 나타났으며, 하악에서 정상교합군은 $79.8-82.2\%$, 비발치군은 $82.1-85.5\%$, 발치군은 $73.1-75.1\%$로 나타났다. 7. 최대치아근원심폭경합, 기저악궁폭경,