• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.207-214
• /
• 2008

Purpose: The aim of augmentation of the alveolar ridge is to restore absorbed alveolar ridges for future implant site or esthetic prosthodontic restoration. The present clinical report describes the anterior maxillary augmentation cases using a soft tissue rotated palatal flap, and considers various problems of before and after surgery. Method: First & second patients were treated by vascularized interpositional periosteal-connective tissue(VIP-CT) flap for horizontal soft tissue augmentation. Especially second patient was progressed with bone grafting at the same time. Third patient was treated by the same flap with bone graft and implant placement in single tooth missing premaxillary area. Result: The obtained horizontal augmentation width measured $0.5{\sim}2.7\;mm$. Conclusion: This technique constitutes a viable approach for augmentation the anterior sector of alveolar ridge with the placement of dental implants. But it needs correct diagnosis preparation and careful surgery skill.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.70-74
• /
• 2016

In the maxillary anterior region, reconstruction of the localized alveolar ridge defect is very important in enhancing the esthetics of fixed partial denture. A 40-year-old female patient presented with a chief complaint of the inconvenience and unesthetic problem of 3-unit maxillary anterior prosthesis due to alveolar ridge resorption. After removal of old prosthesis, intraoral examination revealed moderate (buccolingually 4 mm) ridge deficiency in missing tooth region, leading to the diagnosis of Class I alveolar ridge defect. One of the reconstruction techniques to overcome this problem might be a technique that combines two types of soft tissue augmentation techniques. The purpose of this paper was to demonstrate the new combined technique of roll flap and combination onlay-interpositional graft utilized to acquire sufficient dimension of recipient area by one time of operation and to present the esthetic improvement of fixed partial denture by using this procedure in case of maxillary anterior localized ridge defect.

• 대한두개안면성형외과학회지
• /
• 제12권2호
• /
• pp.86-92
• /
• 2011

Purpose: The purpose of this study was to investigate the possibility that a dynamic facial composite flap with sensory and motor nerves could be made available from donor facial composite tissue. Methods: The faces of 3 human cadavers were dissected. The authors studied the donor faces to assess which facial composite model would be most practicable. A "panorama facial flap" was excised from each facial skeleton with circumferential incision of the oral mucosa, lower conjunctiva and endonasal mucosa. In addition, the authors measured the available length of the arterial and venous pedicles, and the sensory nerves. In the recipient, the authors evaluated the time required to anastomose the vessels and nerve coaptations, anchor stitches for donor flaps, and skin stitches for closure. Results: In the panorama facial flap, the available anastomosing vessels were the facial artery and vein. The sensory nerves that required anastomoses were the infraorbital nerve and inferior alveolar nerve. The motor nerve requiring anstomoses was the facial nerve. The vascular pedicle of the panorama facial flap is the facial artery and vein. The longest length was 78 mm and 48 mm respectively. Sensation of the donor facial composite is supplied by the infraorbital nerve and inferior alveolar nerve. Motion of the facial composite is supplied by the facial nerve. Some branches of the facial nerve can be anastomosed, if necessary. Conclusion: The most practical facial composite flap would be a mid and lower face flap, and we proposed a panorama facial flap that is designed to incorporate the mid and lower facial skin with and the unique tissue of the lip. The panorama facial composite flap could be considered as one of the practicable basic models for facial allotransplantation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.267-272
• /
• 2009

Bone grafting the alveolar cleft allows for stability and continuity of the dental arch, provides bone for eruption of permanent teeth or placement of dental implants, and gives support to the lateral ala of the nose. Closure of residual oronasal fistula can occur simultaneously. Repair of alveolar clefts can occur at a variety of stages defined as primary, early secondary, secondary, and late. Most centers perform this surgery as secondary bone grafting. Autogenous bone provides osteogenesis, osteoinduction and conduction and is recommended for grafting to the cleft alveolus and several donor sites are available. The surgeon should select the best flap design considering the amount of mucosa available, blood supply and tension-free closure, and the extent of the oronasal communication. The authors provide a comprehensive understanding of alveolar clefts and their repair by reviewing the historical perspective, objectives for treatment, timing, source of graft, presurgical orthodontics, surgical techniques, postoperative care, and complications.

• 말소리와 음성과학
• /
• 제8권3호
• /
• pp.21-29
• /
• 2016

This study examined how native Korean speakers realize the acoustic characteristics of /d, t/ flaps in American English. Fourteen subjects, who had lived in foreign countries for less than one year, read words containing the alveolar stops in flapping environments. /d/ (91%) became flaps more frequently than /t/ (42%). The closure durations for /d/ flaps were significantly longer than /t/ flaps, and the durations of the preceding vowels were not significantly different between /d/ and /t/ flaps. Female learners demonstrated a higher percentage of /t/ flapping than their male counterparts. Differences in flap patterns were observed among individual learners.

• 대한두개안면성형외과학회지
• /
• 제24권6호
• /
• pp.284-287
• /
• 2023

The ultimate goal of cleft palate repair is to achieve an intact palate with the separation of the oral and nasal cavities. However, some patients develop an oronasal fistula in the secondary palate after palatoplasty. Postoperatively, a secondary palatal oronasal fistula may develop, leading to functional problems. In this study, we describe a patient with recurrent oronasal fistula and alveolar cleft with multiple failed previous reconstructions at another clinic. The oronasal fistula and alveolar cleft were repaired using a tongue flap and an iliac bone graft, respectively. The patient demonstrated excellent clinical progress with no recurrence of the oronasal fistula at the 1-year follow-up.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.512-518
• /
• 2010

임상적으로 흔히 관찰되는 상악 영구 전치의 매복은 대부분 치조골 순측에 매복되어 있다. 치조골의 순측에 매복되어 정상적인 맹출을 기대할 수 없을 때, 매복 원인을 제거 후 관찰하거나 필요시 외과적 노출술 또는 교정 장치물을 부착하여 교정적인 견인을 고려할 수 있다. 일반적으로 매복치아가 치조점막부에 위치하거나, 치조골내 깊이 매복되어있는 경우, 단순히 치은절제술과 치조골 제거에 의한 매복치의 외과적 노출은 부착치은 폭경의 감소, 치은염 발생, 변연 치조골 상실 등을 초래할 수 있다. 따라서 치아를 외과적으로 노출시키고 교정 장치물을 부착시킨 후 다시 판막을 피개하는 폐쇄 맹출법으로 교정적 견인을 하는 것이 일반적이다. 그러나 매복 치아가 가동성 점막 직하방에 존재한다면 근단 변위 판막술을 통해, 단순히 치은의 절제를 통한 노출시 발생하는 합병증을 방지할 수 있고, 매복치의 맹출 유도를 더 용이하게 시행할 수 있다. 본 증례는 상악 영구 절치의 미맹출을 주소로 본원에 내원한 환아들을 대상으로 하여 근단 변위 판막술을 시행한 결과 부착치은의 상실없이 맹출 유도를 얻고 심미성에서 양호한 결과를 얻을 수 있어 보고하는 바이다.

• 대한구순구개열학회지
• /
• 제8권1호
• /
• pp.31-37
• /
• 2005

In alveolar deformity of cleft patient, the flap design is very important to make the functional and esthetic outcome. Especially in bilateral cleft alveolus with wide defect, deficiency of covering tissue is a greatest problem. Wound dehiscence may develop oronasal fistula of palatal and labial region and loss of the bone graft. We report 2 cases with bilateral cleft alveolus. In both case, bilateral buccal mucosal flap was used for closure of bilateral cleft alveolus with wide defect. The one was operated with iliac bone graft according to secondary grafting method, the other was closed without bone grafting. The patient was 3 years old. So, secondary alveolar bone graft will be required some years later for the establishment of bony continuity and esthetic advantage. In both cases, we found the entire soft tissue closure without the lack of covering flap. In these case, the closure of alveolus defect was accomplished successfully by the use of bilateral buccal mucosal flap. There was no complication, secondary fistula. The most important thing is the tension-free closure of the bilateral buccal mucosal flap. So, we report these cases with literatures.

• Journal of Periodontal and Implant Science
• /
• 제23권3호
• /
• pp.422-441
• /
• 1993

The purpose of this study was to compare effects of the bioceramics on healing processes of the alveolar bone defects in dogs. Five adult dogs aged 1 to 2 years were used in this study. Experimental alveolar bone defects were created surgically with a #1/2 round bur at the furcation area of the buccal surface of the mandibular 3rd, 4th premolars and 1st molar. Fifteen experimental alveolar bone defects were devided into three groups according to the type of graft materials. The groups were as follows : 1) flap operation with dense hydroxyapatite( DHA group ) 2) flap operation with porous hydroxyapatite( PHA group ) 3) flap operation with natural coral ( NC group ) At 1, 2, 4, 6, and 12 weeks, dogs were serially sacrificed and specimens were prepared with Hematoxylin-Eosin stain and Mallory stain for light microscopic evaluation. The results of this study were as follows : 1. In every group, inflammatory cell infiltrations were seen at 1st weeks due to surgical trauma, however inflammatory response owing to graft materials were not seen. 2. In every group, the appearance of connective tissue around graft materials was loosely formed at the initial stages, however the connective tissue was densely formed at 2 weeks. 3. The presence of osteocytes were observed at 2 weeks in the natural coral group, however the osteocytes were appeared at 6weeks in the dense hydroxyapatite group. 4. A new bone was formed from the base and walls of the defect and gradually expanded toward the graft materials. 5. A resorption of the natural coral occurred irregularly at the periphery of the material, therefore the size and shape of the natural coral were reduced at 6 weeks. 6. At 12 weeks, the porous hydroxyapatite and natural coral were surrounded by newly formed bone most completely, however dense hydroxyapatite was surrounded by newly formed bone in part.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권4호
• /
• pp.301-307
• /
• 2004

The flap considered at first for the reconstruction of large maxillary defect, especially mid-face defect, is scapular free flap, because it provides ample composite tissue which can be designed 3-dimensionally for orbital, facial and oral reconstruction. In case of maxillary defect involving hard palate, however, this flap has some limitations. First, its bulk prevents oral function and physio-anatomic reconstruction of nasal and oral cavity. Second, mobility and thickness of cutaneous paddle covering the alveolar area reduce retention of tissue-supported denture and give rise to peri-implantitis when implant is installed. Third, lateral border of scapula that is to reconstruct maxillary arch and hold implants is straight, not U-shaped maxillary arch form. To overcome these problems, new concept of step prefabrication technique was provided to a 27-year-old male patient who had been suffering from a complete hard palate and maxillary alveolar ridge defect. In the first stage, scapular osteomuscular flap was elevated, tailored to fit the maxillary defect, particulated autologous bone was placed subperiosteally to simulate U-shaped alveolar process, and then wrapped up with split thickness skin graft(STSG, 0.3mm thickness). Two months later, thus prefabricated new flap was elevated and microtransferred to the palato-maxillary defect. After 6 months, 10 implant fixtures were installed along the reconstructed maxillary alveolus, with following final prosthetic rehabilitation. The procedure was very successful and patient is enjoying normal rigid diet and speech.