• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.296-326
• /
• 1994

The purpose of this study was to evaluate the mechanical effects when one implant fixture was connected to the natural teeth with reduced alveolar bone height. This study also examined the effects of increasing the number of abutment teeth and the effects of the intramobile connector and the titanium connector as they were inserted between the implant superstructure and the fixture. The distribution and concentration load was applied to the fixed partial denture(FPD) supported by implant and the natural teeth with reduced alveolar bone height. The stress and displacement of each element was observed and compared by the two-dimensional finite element method. The following results were obtained : 1. The greater the loss of alveolar bone in natural teeth area, the greater the displacement of FPD and the stress concentration in alveolar bone around implant, especially at the stress concentration in the mesial alveolar bone crest around implant fixture. 2. The displacement of FPD was increased more and that of implants fixture was decreased more when intramobile connector was used than titanium connector was used. Also the stress concentration in alveolar bone around implant fixture was greater when intramobile connector than titanium connector. One implication of this finding was that the difference in stiffness of implant and the natural teeth with reduced alveolar bone height could be partially compensated in case of the POM intramobile connector. 3. The amount and direction of displacement and the stress distribution of the 4-unit FPD was better than those of the 3-unit FPD. It implied that the difference of stiffness of implant and natural teeth with reduced alveolar bone height could be partially compensated in case of the 4 unit FPD.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제48권2호
• /
• pp.85-93
• /
• 2022

Objectives: The aim of this study was to compare morbidities and duration of surgery, as well as bone formation in alveolar defects reconstructed with symphysis bone combined with allograft and iliac crest bone graft in patients with cleft palate. Patients and Methods: This randomized clinical trial was performed with 22 patients with unilateral alveolar cleft with a follow-up period of 12 months. In 12 patients, alveolar defects were reconstructed with chin bone graft plus allograft (Group A), while for the other 10 patients, iliac bone crest was used as donor site (Group B). Duration of surgery as well as occurrence of morbidities and complications were recorded. In addition, cone-beam computed tomographic (CBCT) scans were performed before surgery and 12 months after surgical procedures in order to compare bone formation between the two groups. Results: Postoperative CBCT demonstrated a mean bone fill percentage of 76.9% of the alveolar defect in Group A, compared with 77.0% in Group B. Paresthesia in the lower lip or chin did not occur in any patients of Group A. The mean duration of the surgical process was significantly shorter for Group A (40 minutes vs 76 minutes, P<0.001). In addition, patients in Group A regained normal gait faster than patients in Group B (1 day vs 9.5 days). Conclusion: Mandibular symphysis bone graft in combination with allograft results in favorable outcomes in patients with unilateral alveolar clefts.

• Journal of Oral Medicine and Pain
• /
• 제8권1호
• /
• pp.77-82
• /
• 1983

The author measured the degree of alveolar bone resorption around mandibular central incisors in Korean female(254). Mandibulr central incisors were selected from the females who do not have periodontal disease or malocclusion. The selected radiograms were enlarged in the $5"\times7"$ printing papers for the precise measuring. The obtained results were as follows : 1. The average alveolar bone resorption around mandibular central incisors in Korean women were 1.91mm in 3rd decade, 2, 16mm in 4th decade, 2.51mm in 5th deacade, 2.70mm in 6th decade, 2.94mm in older age group. 2. Alveolar bone resorption and age were in positive correlation; there is a tendency that the alveolar bone resorption increase with aging. 3. The regression equation is as follows. Y=13.57x + 7.06(r=0.60, n=254) (Y=estimated age, x=Length(C-E Junction alveolar crest)lar crest)

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.274-282
• /
• 2007

Statement of problem: Main consideration was given to the stresses at the site of implant entry into the cortical bone at the alveolar crest. As a suspectible factor affecting the occurrence of stress concentrations, the contact angle between the implant and the alveolar crest bone was addressed. Purpose: The purpose of this study is to evaluate angles between the alveolar crest bone and the implant effect on the implant crestal area induced stresses using a finite element method. Material and methods: Cylindrically shaped, standard size ITI implants entering into alveolar crest with four different contact angles of 0, 15, 30, and 45 deg. with the long axis of the implant were axisymmetrically modelled. Alterations of stresses around the implants were computed and compared at the cervical cortical bone. Results and conclusion: The results demonstrated that regardless of the difference of the implant/alveolar crest bone contact angles, stress concentration occurred at the cervical bone and the angle differences led to insignificant variations in stress level.

• Journal of Korean Dental Science
• /
• 제6권1호
• /
• pp.13-21
• /
• 2013

Purpose: To report the successful results of using chin bone graft and autogenous tooth bone graft material (AutoBT) in alveolar cleft patients. Materials and Methods: Five patients with alveolar cleft defects underwent alveolar bone grafting. Three patients were treated using chin bone graft, and the other two patients underwent AutoBT graft. After implant site development using chin bone graft in the fi rst three cases, endosseous implant restorations were placed. In case #4 and 5, AutoBT graft material was placed to guide the normal eruption of partially impacted maxillary right canine and to the upper docking site after distraction osteogenesis. Result: Successful implant restorations with closure of the oronasal fistula were achieved in alveolar cleft defect reconstruction using either chin bone graft (Case #1, 2, 3) or AutoBT graft material (Case #4, 5). Case #4 showed enlarged follicle of the right maxillary canine, indicating a normal eruption guide pattern. Conclusion: Both chin bone graft and AutoBT graft showed favorable outcomes in reconstructing alveolar cleft defects. Autogenous tooth bone graft opens up the possibility of avoiding harvesting autogenous bone graft with complications and morbidities.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.455-469
• /
• 1994

Regular radiographic examination has been considered an essential diagnositic method for osseointegrated dental implantation. This study investigated marginal bone loss through the measurement on periapical radiographs and changes in bone density through digital subtraction image radiographic method around 88 endoseous root-form dental implants in 43 human subjects. Four types of endosseous dental implants were investigated : Standard series, Mini series and Hex-lock system of Steri-Oss Dental implant system, and $Br{\aa}nemark$-type implant from 3i dental implant system, in a 3 month interval for a total period of 12 months. The results were as follows : 1. Rapid bone loss occurred in the first 3 months in all 4 groups, and the bone level stabilized at the first thread of the implant fixtures. Amount of bone loss for 12 months showed correlation with the length of the polished neck portion. 2. Most of the implant systems showed resorption of alveolar bone up to the polished neck portion although a long polished neck could delay the resolution. 3. Alveolar bone loss apical to the polished neck portion stabilized at the first thread of the fixtures with no correlation to either the time of exposure of the polished neck or types of implant systems. 4. No changes in bone density around the implant threads were observed throughout the experimental period. Bone density decreased at the marginal bone, and increased at the newly-formed alveolar crest. These results indicate that most of the alveolar bone loss occur within the first 12 months after installation of endosseous root-form dental implants resulting in the exposure of polished neck portions, and the bone level stabilizes thereafter at the first thread portions of the implant fixtures. The experimental period of 12 months seems insufficient for observing changes in bone density, and a long-term observation should be needed.

• 대한치과보철학회지
• /
• 제39권4호
• /
• pp.376-390
• /
• 2001

Alveolar bone changes after immediate loading on implants up to one year were observed by means of standard intraoral X-ray measurement which were taken at 3 month intervals. At the same time, bone density changes were observed according to digital subtraction method which is a becoming a more and more promising diagnostic tool for implants. Following results were obtained ; 1. There was no significant difference in the amount of alveolar bone loss implant type, sex and implant diameter, but there was difference according to case selection. In fully bone anchored prostheses cases, bone loss was $1.16{\pm}0.15m$ whereas, in partial edentulous cases, it was $1.84{\pm}0.08mm$. 2. Alveolar bone loss after immediate loading showed a higher degree of bone loss than after submerged loading in the initial three months. But there were no significant difference at the 12th month. 3. According to the one year bone density change observation at the alveolar bone surrounding the implant, significant change was observed vertically, whereas no significant change could observed horizontally. According to the above mentioned results, we can conclude that immediate loading of implants results in a higher degree of alveolar bone loss in one year than submerged loading. But since alveolar bone loss rate decreases to a reasonable rate after the initial 3 months of rapid bone loss, immediate loading of implants seems to be an acceptable treatment modality for patients with good bone conditions. Fully bone anchored cases showed an favorable outcome, but partial edentulous cases showed more bony resorption. So this cases considered in case selections. Bone density changes observation in the study was performed for only one year therefore a more longitudinal observation may be studied.

• Archives of Plastic Surgery
• /
• 제50권5호
• /
• pp.478-487
• /
• 2023

Background The outcome of alveolar grafting with synthetic bone substitute (Osteon III) in various bone defect volumes is highlighted. Methods A prospective study was accomplished on 55 patients (6-13 years of age) with unilateral alveolar bone cleft. Osteon III, consisting of hydroxyapatite and tricalcium phosphate, is used to reconstruct the defect. Alveolus defect diameter was calculated before surgery (V1), after 3 months (V2), and finally after 6 months (V3) postsurgery. In the t-test, a significant difference and correlation between V1, V2, and V3 are stated. A p-value of 0.01 is considered a significant difference between parameters. Results The degree of cleft is divided into three categories: small (9 cases), medium (20 patients), and large (26 cases).The bone volume of the clefted site is divided into three steps: volume 1: (mean 18.1091 mm³); step 2: after 3 months, volume 2 resembles the amount of unhealed defect (mean 0.5109 mm³); and the final bone volume assessment is made after 6 months (22.5455 mm³). Both show statistically significant differences in bone volume formation. Conclusion An alloplastic bone substitute can also be used as a graft material because of its unlimited bone retrieval. Osteon III can be used to reconstruct the alveolar cleft smoothly and effectively.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.367-376
• /
• 2018

Objective: This study was performed to investigate the changes in alveolar bone after maxillary incisor intrusion and to determine the related factors in deep-bite patients. Methods: Fifty maxillary central incisors of 25 patients were evaluated retrospectively. The maxillary incisors in Group I (12 patients; mean age, $16.51{\pm}1.32years$) were intruded with a base-arch, while those in Group II (13 patients; mean age, $17.47{\pm}2.71years$) were intruded with miniscrews. Changes in the alveolar envelope were assessed using pre-intrusion and post-intrusion cone-beam computed tomography images. Labial, palatal, and total bone thicknesses were evaluated at the crestal (3 mm), midroot (6 mm), and apical (9 mm) levels. Buccal and palatal alveolar crestal height, buccal bone height, and the prevalence of dehiscence were evaluated. Two-way repeated measure ANOVA was used to determine the significance of the changes. Pearson's correlation coefficient analysis was performed to assess the relationship between dental and alveolar bone measurement changes. Results: Upper incisor inclination and intrusion changes were significantly greater in Group II than in Group I. With treatment, the alveolar bone thickness at the labial bone thickness (LBT, 3 and 6 mm) decreased significantly in Group II (p < 0.001) as compared to Group I. The LBT change at 3 mm was strongly and positively correlated with the amount of upper incisor intrusion (r = 0.539; p = 0.005). Conclusions: Change in the labial inclination and the amount of intrusion should be considered during upper incisor intrusion, as these factors increase the risk of alveolar bone loss.