• 제목/요약/키워드: aluminum trihydroxide

검색결과 6건 처리시간 0.029초

Kaolinite-Aluminum Trihydroxide의 혼합물의 혼합분쇄효과 및 Mullite의 생성에 미치는 영향 (Mixed Grinding Effect on Kaolinite-Aluminum Trihydroxide Mixture and Its Influence on Mullite Formation)

  • 류호진
    • 한국세라믹학회지
    • /
    • 제34권2호
    • /
    • pp.195-201
    • /
    • 1997
  • 본 논문은 kaolinite(Al2O3.2SiO2.2H2O)-aluminum trihydroxide(Al(OH3) 혼합물을 소결전에 planetary ball mill을 사용하여 건식 중에서 혼합분쇄한 후, 이 혼합물을 사용하여 소결하는 동안에 mullite의 생성거동을 연구한 것이다. 혼합물의 입자크기 감소는 분쇄 초기에 현저하였으며, 분쇄기간이 증가함에 따라 미립자들이 응집하는 현상을 보였다. 혼합물의 결정구조는 planetary ball milling에 의한 혼합분쇄에 따라 쉽게 비정질화되었으며, 비정질화되는 정도는 분쇄시간이 증가함에 따라 증가하였다. Kaolinite의 초기 분순물로 존재했던 anatase를 제외한 mullite상만이 상대적으로 낮은 소결온도인 1523K에서 혼합분쇄한 혼합물의 소결체에서 나타났다. 한편, 분쇄하지 않은 혼합물의 소결체의 경우는 이 온도에서 mullite 상 이외에 corundum, cristobalite, Al-Si spinel상이 공존하는 형태로 나타났다. 따라서, 혼합분쇄처리는 출발원료의 미소 규모에 있어서 균일혼합 및 분산을 촉진시키며, 또한 결정구조변화에 따른 열분해온도의 변화일으켜, 상대적으로 낮은 온도에서 고순도의 mullite를 직접 생성하는데 효과적이였다.

  • PDF

에틸렌 비닐아세테이트/수산화알루미늄 복합재료의 난연 및 물리적 특성 (Flame Retardancy and Physical Properties of Ethylene Vinyl Acetate/Aluminum Trihydroxide Composites)

  • 이민호;유다영;김영호;이성희;김정호;이영철
    • 폴리머
    • /
    • 제39권3호
    • /
    • pp.433-440
    • /
    • 2015
  • 에틸렌비닐아세테이트(EVA)에 난연성을 부여하기 위해서 일반적으로 무기 난연충전제인 수산화알루미늄(ATH)이 사용되고 있다. 본 연구에서는 폐포장재 다층 필름의 재활용 공정에서 부생하는 ATH를 사용하여 EVA에 대한 난연제로서의 특성을 조사하였다. EVA/ATH 복합재료를 two roll-mill을 이용하여 제조하고, 이 복합재료의 난연성 및 물리적 특성을 조사하였다. 난연성은 한계산소지수(LOI) 및 UL-94 평가를 이용하여 확인하였다. EVA 수지에 재활용된 ATH가 150 phr 이상 첨가되었을 때 우수한 난연 특성을 나타내었다. ATH의 입자 크기 및 비표면적이 EVA/ATH 복합재료의 LOI 값 및 UL-94 평가의 등급에 영향을 주는 인자임을 확인하였다. 즉 ATH 입자 크기가 작을수록, 비표면적이 클수록 난연성은 증가되는 것으로 나타났다. 기계적 물성의 경우 실제로 전선 등에 이용되고 있는 가교형 EVA/ATH 복합재료의 경우 재활용된 ATH를 첨가하여도 인장물성은 저하되지 않고 첨가하지 않은 경우와 유사하거나 오히려 우수한 것으로 나타났다.

Flame Retardancy and Thermal Properties of PVC/ATH Composites Prepared by a Modular Intermeshing Co-rotating Twin Screw Extruder

  • Lee, Hyeongsu;Park, Se-Ho;Lee, Jae-Yeul;Park, Yuri;Jeong, Hobin;Jhee, Kwang-Hwan;Bang, Daesuk
    • Elastomers and Composites
    • /
    • 제51권2호
    • /
    • pp.147-153
    • /
    • 2016
  • Polyvinyl chloride (PVC) has been used as a general-purpose polymer because of its lower cost, good durability and mechanical properties compared to other materials. However, PVC is vulnerable to heat deformation and generates a toxic gas like hydrogen chloride. Therefore, it is important to delay or prevent the flame retardancy and thermal degradation of the PVC during the processing. It was reported that aluminum trihydroxide (ATH) improved flame retardancy as well as smoke inhibition of the virgin polymer. In this study, PVC composites by addition of ATH were compounded in a modular intermeshing co-rotating twin screw extruder. The PVC composites with different concentrations of ATH (0~5 phr) were analyzed. Flame retardancy of the PVC composite significantly increased depending on the ATH concentration. LOI of the composite also increased with the concentration of ATH. There were no significant differences for the thermal properties of the PVC composites with ATH.

낮은물/알루미나 비에서 비정질 알루미나 분말의 수화특성 (The Rehydration Properties of Amorphous Alumina Powder in Low Water/Alumina Ratio)

  • 박병기;서정권;이정민;서동수
    • 한국세라믹학회지
    • /
    • 제35권10호
    • /
    • pp.1085-1093
    • /
    • 1998
  • Amorphous alumina powder prepared by the fast calcination of aluminum trihydroxide(Al(OH)3 gibbsite) for 0.5 second at 580$^{\circ}C$ was investigated rehydration propeties. Phase composition crystal size and mor-phology surface area pore volume and pore size distribution of pesudo-boehmite and bayerite crystals changed with temperature time water/alumina ratio and particle size when amorphous alumina rehydrated with water. Phase compositions were examined with XRD and DTA and crystal sized morphologies were investigaed with SEM and TEM. Also rehydration properties of amorphous alumina were in-vestigated by measuring the surface area pore volume and pore size distribution.

  • PDF

수화한 무정형 알루미나로부터 제조된 $\gamma$-Alumina의 특성 (Characteristics of $\gamma$-Alumina Prepared from Rehydrated Amorphous Alumina)

  • 김윤섭;고형신;서정권;이정민;하백현
    • 한국재료학회지
    • /
    • 제11권11호
    • /
    • pp.978-985
    • /
    • 2001
  • The amorphous alumina was obtained by flash calcination of Bayer gibbsite[$Al(OH)_3$aluminum trihydroxide]. Rehydration and pore characteristics of $r-A1_2O_3$ prepared from rehydrated amorphous alumina were investigated. Crystal phases of pseudo-boehmite and bayerite were changed when amorphous alumina was hydrated at various conditions such as time, the ratio of water/alumina and pH. Specific surface areas and pore volumes of $r- A1_{2O}_3$ were influenced by the reaction time, water/alumina and PH of rehydration. The total pore volume of $r-A1_{2O}_3$increases with increasing the reaction time and ratio of water/alumina. Especially, the pure pseudo-boehmite of single phase could be prepared, when amorphous alumina was hydrated in the range of pH 6.5-8.0 in water/alumina= 10 at $90^{\circ}C$ for 7hr. The $r-Al_{2O}_3$, obtained by calcination of the prepared pseudo-boehmite at $500^{\circ}C$ for 2hrs, is characterized by the specific surface area of $265m^2$/g, total pore volume of $0.75cm^3$/g.

  • PDF

전자 빔 조사 민감 물질의 전자회절분석을 위한 Imaging Plate 기술 (Imaging Plate Technique for the Electron Diffraction Study of a Radiation-sensitive Material under Electron Beam)

  • 김영민;김양수;김진규;이정용;김윤중
    • Applied Microscopy
    • /
    • 제38권3호
    • /
    • pp.185-193
    • /
    • 2008
  • 전자 빔 조사 민감 물질인 gibbsite(${\gamma}-Al(OH)_3$)의 전자 빔 조사 상전이 연구에서 전자회절 자료의 기록에 대한 imaging plate와 필름의 기록 특성을 실험적으로 비교하였다. Imaging plate는 극단적으로 낮은 전자 강도와 높은 전자 강도를 동시 기록하기에 충분한 선형 dynamic range를 갖기 때문에, 매우 낮은 전자 조사 조건(${\leq}0.1\;e^-/{\mu}m^2$)에서 전자 회절 자료를 기록할 때 필름에 비해 회절 자료의 spatial frequency 범위가 두 배 이상 확장되었다. 심지어 이미 기록 포화된 투과 빔 주위의 신호 정보 레벨을 세분화하는 데에도 훨씬 우수한 분해 성능을 나타내었다. 따라서 본 연구 결과는 imaging plate가 극단적으로 낮은 전자 강도 기록이 필요한 전자 빔 조사 민감 물질이나 cryo-biological 시편들의 구조 연구 관점에서 가장 적절한 기록 매체임을 나타낸다.