• Title/Summary/Keyword: aluminum foam

Search Result 121, Processing Time 0.04 seconds

Variation of Tow Geometry according to Mold Property and Shear Angle during Draping on 3D Curved Surfaces (3 차원 곡면 드레이핑 중 금형의 물성과 전단각에 따른 토우구조의 변화)

  • Chung, Jee-Gyu;Chang, Seung-Hwan
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2005.04a
    • /
    • pp.154-157
    • /
    • 2005
  • This paper aims to investigate the tow deformation pattern with respect to shear angle and mold property during draping of plain weave carbon/epoxy prepreg. Aluminum and PVC foams with different foam density are used for the draping hemisphere molds with 250 mm diameters. Microscopic observation reveals that tow parameters like crimp angle and Y-directional tow intervals are influenced by shear angle and mold density at the same time. The correlation between crimp angle and Y-directional tow interval is also found out.

  • PDF

Study on low impact experiment of aluminum foam core (알루미늄 폼 코어 복합재료의 저충격 실험에 관한 연구)

  • Kim, Sung-Soo;Kim, Sei-Hwan;Cho, Jae-Ung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2012.05b
    • /
    • pp.646-648
    • /
    • 2012
  • 본 연구에서 다루는 복합재료는 알루미늄 폼으로써 다공성 구조체로 고체 알루미늄 금속에 비하여 비중이 1/10 정도로 작고, 충격에너지 흡수가 우수하다. 본 연구에서는 다공성 심재를 갖는 복합재료 알루미늄 폼 코어의 충격실험을 실시하여 기계적 특성을 파악하였다. 시험편은 알루미늄 폼 코어를 갖는 복합재료로써 시험편에 50J의 저 충격에너지를 가하도록 하였다. 그 결과, 모든 실험에서 스트라이커가 상부면재 통과 시 최대하중이 나타났고, 이때의 최대하중 값은 약 5.5 KN으로 나타났다. 또한 최대 하중 발생 시간은 50J일 때 약 4.2 ms가 나왔다. 최대 하중이 발생한 후, 즉 상부 면재 통과 후에 실험에서는 약 10 mm정도를 더 뚫으면서 심재에 까지 손상을 주었지만 하부 면재에는 손상을 주지 못하였다. 이로써 스트라이커가 알루미늄 폼 코어 샌드위치 복합재료를 통과 할 때 상부면재 통과 시 최대 하중이 발생하고 심재를 지나며 서서히 감소되는 것을 볼 수 있었다.

  • PDF

Study on Structural Analysis of DCB Structure with Aluminum Foam (알루미늄 폼을 갖는 DCB 구조체의 구조해석에 관한 연구)

  • Choi, Hae-Kyu;Kim, Sei-Hwan;Cho, Jae-Ung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2012.05b
    • /
    • pp.617-619
    • /
    • 2012
  • 본 논문에서는 알루미늄 폼 복합재료로 된 DCB(이중외팔보) 구조체의 파괴 거동을 시뮬레이션 해석하였다. 시뮬레이션 해석에 사용된 모델은 영국 공업규격과 ISO국제규격에 의거하여 3D모델을 설계하였다. 해석 결과 모델의 두께가 두꺼울수록 발생한 크랙의 길이가 길게 나타났고, 높은 하중이 발생하였다. 이와 같은 연구에서 얻어진 해석 결과를 통하여 알루미늄 폼 재질로 접합된 실제 복합재 구조물에 적용시켜 파괴거동을 분석하고 그 기계적인 특성을 파악할 수 있다.

  • PDF

Study on the Behavior of Crash Box Applied with Aluminum Foam (알루미늄 폼이 적용된 크래쉬 박스의 거동에 관한 연구)

  • Min, Byoung-Sang;Cho, Jae-Ung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05b
    • /
    • pp.844-846
    • /
    • 2011
  • 충돌에서의 차체 손상과 충돌 성능 강화를 위하여 최근 크래쉬 영역의 개념이 설계개념에 도입되고 있다. 대표적인 예가 범퍼와 차체사이의 크래쉬 박스로 저속충돌시 충격에너지를 흡수하여 범퍼이후 차체에 에너지를 저감시켜 차량의 안전성 및 수리비 저감 등에 있어서도 매우 효과적인 역할을 하는 부품으로 이에 대한 개발을 위해 많은 연구들이 진행되고 있다. 본 논문에서는 충돌에너지 흡수성능이 우수한 크래쉬박스에 알루미늄 폼을 적용하였을 때 충돌에너지 흡수 및 거동에 대하여 충돌해석을 수행하였다.

  • PDF

Study on the Comparison of Compression Properties between Aluminum Foam and Honeycomb Sandwich Composites (알루미늄 폼 및 허니컴 샌드위치 복합재료의 압축 특성 비교연구)

  • Bang, Seung-Ok;Cho, Jae-Ung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05b
    • /
    • pp.602-604
    • /
    • 2011
  • 본 연구에서는 알루미늄 폼 샌드위치 복합재료와 알루미늄 허니컴 샌드위치 복합재료의 면내 외 방향 압축실험으로 하중-변위의 관계를 분석하고 압축 특성을 비교하였다. 만능재료시험기로 1 mm/min 의 속도로 압축을 하였으며, 카메라로 실험과정을 촬영하고 로드셀에서 나오는 데이터를 컴퓨터로 저장하였다. 압축실험의 결과로 알루미늄 폼 및 허니컴 샌드위치 복합재료에서 하중이 증가함에 따라 심재에 좌굴이 발생하였다. 면내 방향 압축실험에서 알루미늄 폼 및 허니컴 샌드위치 시험편에 작용하는 압축 최대하중은 비슷하지만 비중을 고려하면 알루미늄 허니컴 샌드위치 복합재료가 더 우수한 것으로 판단되며, 면외 방향 압축실험에서도 알루미늄 허니컴 샌드위치 복합재료의 압축 최대하중이 알루미늄 폼 샌드위치 복합재료보다 높게 나왔다.

  • PDF

Technology Development of Noise Reduction at Stack for Resolution of Abnormal Noise (이상소음 해소를 위한 Stack 소음저감 기술개발)

  • Ho, Kyong-Chan;Lee, Young-Je;Kim, Sung-Jin;Kwon, Hycuk-Kwan;Jung, Hyun-Il
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.1049-1052
    • /
    • 2006
  • Object of this study is to develop an Stack Silencer System for quieting abnormal noise around power plant. Abnormal noise gets resident people to feel uncomfortable. Stack Silencer System is to minimize pressure loss of exhaust gas and to maximize noise reduction effect from abnormal noise frequency band. Stack Silencer System is installation in stack and absorbing material is an aluminum foam. Reduction effect measures insertion loss of $8.2{\sim}19.4dB$ by Stack silencer installation. After Stack Silencer System installation, pressure loss of exhaust gas measured $5{\sim}9mmH_2O$.

  • PDF

The Preparation of porous ceramic material from aluminum waste dross (알루미늄 廢드로스를 活用한 세라믹 多孔體의 製造)

  • Kim, Ki-Seok;Park, Jay-Hyun;Park, Jai-Koo
    • Resources Recycling
    • /
    • v.14 no.2
    • /
    • pp.19-27
    • /
    • 2005
  • The recycling possibility of aluminum waste dross(AWD) as a ceramic raw material of porous light-weight material was examined. A aluminum waste dross was washed 4-7 consecutive times and roasted at 900$^{\circ}% for 1hour as pre-treatments. The properties of the pre-treatment of aluminum waste dross was investigated. It was conformed by XRD result that the spinel crystalline was grown in AWD, after roasting. After the roasted AWD was ground in aqueous state, the sodium hexaphosphate(SHP) as a dispersant which is used for stabilizing the concentrated slurry was added to the AWD slurry. The porous material was prepared by slurry foaming method with surfactant at room temperature. The foamed slurry volumes were 2 and 3 times of the original slurry volume. The properties of porous material with extended volume of 3 times was following: the porosity was about 84%, bulk density was 0.59 g/cm$^3$, the range of pore was from 50 ${\mu}m$ to 500 ${\mu}m$ and mean pore size was about 200 ${\mu}m$. AWD porous material was sintered at 1150$^{\circ}C-1250$^{\circ}C. It was colcluded that AWD was sintered well at 1200$^{\circ}C from material surface observation by SEM.

Analysis on the Impact of Composite by Using FEM (유한요소법을 이용한 복합재료의 충격에 관한 해석)

  • Kim, Sung-Soo;Kim, Young-Chun;Hong, Soon-Jik;Kook, Jeong-Han;Kim, Sei-Hwan;Cho, Jae-Ung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.2
    • /
    • pp.542-547
    • /
    • 2013
  • In this study, mechanical property on the composite material of aluminum foam core is investigated by simulation analysis. Impact energies such as 50J, 70J, and 100J are applied to the specimen model. The maximum load occurs at 3.4ms for 50J, 3.2ms for 70J, and 3.2ms for 100J respectively. The striker penetrates the upper face sheet, causing the core to be damaged at 50J test but the lower face sheet remains intact with no damage. It results in occurring with the energy of 52 J. At 70J test, it penetrates the upper face sheet and penetrated the core. And the striker causes the lower face sheet with damage. And it results in occurring with the energy of 65 J. Finally at 100J test, the striker penetrated both the upper face sheet and core and even the lower face sheet. The load becomes maximum at the time when striker penetrates through the upper plate and it rapidly reduced. And then the load increases rapidly when reaching the lower face sheet. And it decreases again. It results in occurring with the energy of 95 J.

Effect of Foaming Agent Content on the Apparent Density and Compressive Strength of Lightweight Geopolymers (발포제 함량에 따른 경량 다공성 지오폴리머의 밀도와 강도 특성)

  • Lee, Sujeong;An, Eung-Mo;Cho, Young-Hoon
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.4 no.4
    • /
    • pp.363-370
    • /
    • 2016
  • Lightweight geopolymers are more readily produced and give higher fire resistant performance than foam cement concrete. Lowering the density of solid geopolymers can be achieved by inducing chemical reactions that entrain gases to foam the geopolymer structure. This paper reports on the effects of adding different concentrations of aluminum powder on the properties of cellular structured geopolymers. The apparent density of lightweight geopolymers has a range from 0.7 to $1.2g/m^3$ with 0.025, 0.05 and 0.10 wt% of a foaming agent concentration, which corresponds to about 37~60 % of the apparent density, $1.96g/cm^3$, of solid geopolymers. The compressive strength of cellular structured geopolymers decreased to 6~18 % of the compressive strength, 45 MPa of solid geopolymers. The microstructure of geopolymers gel was equivalent for both solid and cellular structured geopolymers. The workability of geopolymers with polyprophylene fibers needs to be improved as in fiber-reinforced cement concrete. The lightweight geopolymers could be used as indoor wall tile or board due to fire resistance and incombustibility of geopolymers.

A Study on the Design of a High-Speed Heddle Frame (고속 직기용 복합재료 헤들 프레임의 설계에 관한 연구)

  • Lee, Chang-Seop;O, Je-Hun;Lee, Dae-Gil
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.25 no.2
    • /
    • pp.250-263
    • /
    • 2001
  • The up and down speed of heddle frames that produce woven cloth by insertion of weft yarns between warp yarns has been increased recently much for productivity improvement, which induces higher inertial stresses and vibrations in the heddle frame. the heddle frame is required to reduce its mass because the heddle frame contributes the major portion of the stresses in the heddle frames during accelerating and decelerating. Conventional aluminum heddle frames have fatigue life of around 5 months at 550rpm due to their low fatigue flexural strength as well as low bending stiffness. In this work, since carbon/epoxy composite materials have high specific fatigue strength(S/p), high specific modulus(E/p), high damping capacity and sandwich construction results in lower deflections and higher buckling resistance, the sandwich structure composed of carbon/epoxy composite skins and polyurethane foam were employed for the high-speed heddle frame. The design map for the sandwich beams was accomplished to determine the optimum thickness and the stacking sequences for the heddle frames. Also the effects of the number of ribs on the stress of the heddle frame were investigated by FEM analyses. Finally, the high-speed heddle frames were manufactured with sandwich structures and the static and dynamic properties of the aluminum and the composite heddle frames were tested and compared with each other.