• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.245-248
• /
• 2003

저온동시소성 세라믹으로 제작된 모듈을 고주파 대역에 적용할 경우 dimension의 오차는 모듈 특성의 오차를 유발시킨다. Constrained sintering 기술은 XY 방향의 수축을 억제시킴으로써 세라믹 소결체의 dimensional tolerance를 향상시키기 위하여 개발된 기술이다. LTCC의 소성온도에서는 수축하지 않는 비소성층을 LTCC 적층체의 위 아래에 함께 적층시킴으로써 XY 방향의 수축은 기계적으로 억제되며, 두께 방향으로만 수축이 일어난다. 본 연구에서는 LTCC 기판을 constrained sintering 방법으로 소성하고, 그 특성값을 일반적인 소성방법으로 제작하였을 때와 비교하였다. 알루미나 테잎의 제조조건 빛 적층조건을 변화시켜 이에 따른 면수축 제어 특성의 변화를 고찰하였다. 실험결과 알루미나 테잎의 고형분 용량과 부착층의 두께가 면수축 제어를 위하여 고려되어야할 주요 인자임을 확인할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1633-1640
• /
• 2018

Epoxy resin is a polar thermosetting polymer that is widely employed in different branches of industry and everyday life, due to their stable physical and chemical properties. Of all the polymer materials currently being used in the electrical insulation industry, epoxy resin is the most widely used kind, chosen as the base polymer material in the present study. Composites were prepared according to the mixing ratio (MS: MA, 1: 9, 3: 7, 5: 5, 7: 3, 9: 1)of mixture for Heterogeneous Minerals(Micro Silica:MS, Micro Alumina:MA) (MS+MA). We have investigated for AC electrical insulation breakdown characteristics and the dielectric properties (permittivity, dielectric loss, and conductivity) with frequency changes. The electrical AC insulation breakdown performance was improved with the increase of the mixing ratio of MS according to heterogeneous mineral material mixture(MS+MA). As Dielectric properties, the dielectric constant and dielectric loss increased with decreasing frequency and decreased with increasing MS content ratio of heterogeneous mineral mixture. Tensile strength and flexural strength according to the mixing ratio (MS + MA) of epoxy / heterogeneous mineral mixture were studied by mechanical properties. The performance of mechanical tensile and flexural strength was significantly improved as the fill contents ratio of MS increased.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.4
• /
• pp.398-405
• /
• 2021

To fabricate a full-scale pilot model of the cost-effective Na-(Ni,Fe)Cl₂ cell, a Na-beta-alumina solid electrolyte (BASE) was developed by applying a one-step synthesis cum sintering process as an alternative to the conventional solid-state reaction process. Also, Fe metal powder, which is cheaper than Ni, was mixed with Ni metal powder, and was used for cathode material to reduce the cost of raw material. As a result, we then developed a prototype Na-(Ni,Fe)Cl₂ cell. Consequently, the Ni content in the Na-(Ni,Fe)Cl₂ cell is decreased to approximately (20 to 50) wt.%. The #1 prototype cell (dimensions: 34 mm × 34 mm × 235 mm) showed a cell capacity of 15.9 Ah, and 160.3 mAh g^-1 (per the Ni-Fe composite), while the #2 prototype cell (dimensions: 50 mm × 50 mm × 335 mm) showed a cell capacity of 49.4 Ah, and 153.2 mAh g^-1 at the 2^nd cycle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.5
• /
• pp.792-798
• /
• 1994

In order to investigate the antioxidant activity of phenolic compounds contained in domestic Meju and Doenjang , the methanolic extract from defatted Meju and Doenjang was fractionated into the phenolic acid and the isoflavone fractions by alumina column and polyamide-6 column chromatography, respectively. Both phenolic acid and isoflavone fractions exhibited an identical antioxidative effect against the oxidation of linoleic acid. GC analysis revealed that the phenolic acid fractio contained vanillic , chlorogenic ,p-coumalic , ferulic, and caffeine acid. The content of caffic acid was greater than 70% in the phenolic acid fraction and the content of vanillic and chlorogenic acids were disappeared during fermentation, and thus, the facts are thought to be reasons for the low antioxidant activity of the phenolic aicd fraction from Doenjang. Similarly, the isoflavone fraction cotained daidzin, glycitin-65-0 glucosider and genistin and their aglycons such as daidzein, glyciten and genistein. The content of daidzin and genistin in Meju dramatically decreased at the early stage of fermentation ,whereas the content of daidzein an dgenistein rather increased ; however, these change in isoflavone contents did not affect the antioxidant activity of isoflavone fractions.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.509-514
• /
• 2010

Porous mullite-bonded SiC (MBSC) ceramics were fabricated at temperatures ranging from 1400 to $1500^{\circ}C$ for 2 h using silicon carbide (SiC), alumina ($Al_2O_3$), strontium oxide (SrO), and poly (methyl methacrylate-coethylene glycol dimethacrylate) (PMMA) microbeads. The effect of template content on porosity, pore morphology, and flexural strength were investigated. The porosity increased with increasing the template content at the same sintering temperature. The flexural strength showed maximum after sintering at $1450^{\circ}C$/2 h for all specimens due to small pores and dense strut. By controlling the template content and sintering temperature, it was possible to produce porous MBSC ceramics with porosities ranging from 30% to 54%. A maximum flexural strength of ~51MPa was obtained at 30% porosity when no template were used and specimens sintered at $1450^{\circ}C$/2 h.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.130-136
• /
• 2005

The effects of additional Mg content, the size and volume fraction of reinforcement phase on the mechanical properties of ceramic particle reinforced aluminium matrix composites fabricated by pressureless metal infiltration process were investigated. The hardness of $SiC_p/AC8A$ composites increased gradually with an increase in the additive Mg content, while the bending strength of $SiC_p/AC8A$ composites increased with an increase in additive Mg content up to 5%. However, this decreased when the level of additive Mg content was greater than 5% due to the formation of coarse precipitates by excessive Mg reaction and an increase in the porosity level. The hardness and strength of the composites increased with decreasing the size of SiC particle. It was found that the composites with smaller particles enhanced the interfacial bonding than those with bigger particles from fractography of the composites. The hardness of $Al_2O_{3p}/AC8A$ composites increased gradually with an increase in the volume fraction, however, the bending strength of $Al_2O_{3p}/AC8A$ composites decreased when the volume fraction of alumina particle was greater than 40% owing to the high porosity level.

• Journal of the Korean Ceramic Society
• /
• v.19 no.2
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.3-8
• /
• 1985

$ZrO_2$ single crystals were grown by slow cooling flux method using Borax $(Na_2B_4O_7)$ and KF as flux agent. The morphology of grown crystals was observed under a petrographic microscope. And the results obtained from grow crystals were as follows : 1. $ZrO_2$ crystals grown in the present work are morphologically divided into two shapes ; tabular and den-dritic crystals. 2. The maximum size of the crystals grown reaches to $4{\times}15{\times}2mm$ on edge into length at $ZrO_2$ 15mole% Borax 50mole% and KF 35mole% 3. $ZrO_2$ single crystals grown by flux method have monoclinc structure. 4. The content of KF as flux agents was limited by 60mole% KF. Since alumina crucible was heavily damaged by increasing KF content.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.91-92
• /
• 2016

Red mud is an inorganic by-product produced from the mineral processing of alumina from Bauxite ores. the development of alkali-activated slag-red mud cement can be a representative study aimed at recycling the strong alkali of the red mud as a construction material. This study is to investigate the pore characteristics of alkali-activated slag-red mud soil pavement according to the red mud content. The results showed that the porosity of alkali-activated slag-red mud soil pavement increased but the compressive strength of that decreased as the red mud content increased.

• 연구논문집
• /
• s.33
• /
• pp.147-155
• /
• 2003

In order to fabricate porous materials having an anisotropic thermal conductivity by aligning plate-shaped pores structure, alumina powder (AM-21, mean particle size $4\mum$) and flake crystalline graphite was used. The aligned pore structure was realized using multi-pressing process. Degree of pore orientation increased with the number of pressing and thermal conductivity, parallel to the pressing direction, decreased with the number of pressing. Thermal conductivity decreased significantly to the addition of 30vol% crystalline graphite, however, in the case of 60vol%, thermal conductivity did not decrease significantly due to the breakage of crystalline graphite. An anisotropy of the thermal conductivity increased with the content of crystalline graphite up to 30vol%. Graded pore structure was fabricated by controlling the content and size of crystalline graphite, which provides, possibly, the enhancement in mechanical strength and thermal insulation properties of the insulating bricks.