• 한국재료학회지
• /
• 제11권5호
• /
• pp.354-360
• /
• 2001

본 연구에서는 탄성문제에 관한 Eshelby의 이론을 응용하여 다수의 개재물이 모상 중에 균일하게 분산하고 탄성적으로 불균질한 복합재료의 거시적 응력-변형관계를 정식화하였다. 정식화의 과정에서, 주위의 구속을 받지 않는 어떤 영역에 응력의 발생을 동반하지 않는 변형률 (transformation strain $\varepsilon_{kl}$), 즉 열팽창 제수를 갖는 물체가 온도변화 ${\Delta}T$ 를 갖는 경우의 열팽창 변형 $\alpha$${\Delta}T$나, 물체가 일정한 소성 변형을 받았을 때의 소성 변형 등을 예로들 수 있는 역학 장을 정의하였다. 본 연구에서 전개한 방법은 선형 탄성론에 기초를 두고 있으며 복합체의 탄성거동만이 아니라 탄성-소성 거동의 해석 또한 가능하게 하였다

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.103-110
• /
• 1999

Different sizes of Si powder and milling medium materials (steel and partially stabilized zirconia (PSZ)) were used to synthesize $Ti_3Si$ and $TiSi_2$ by mechanical aollying (MA) of Ti-25.0.at.%Si and Ti-66.7at.% Si powder mixtures. the formation of each titanium silicide did not occur even after 360 min of MA of as-re-ceived Si and Ti powder mixtures due to the lack of homogeneity. $Ti_3Si$, however, was synthesized after 240 min of MA of Ti and 60 min-premilled Si powder mixture. ${\alpha}-TiSi_2$ and $TiSi_2$ were produced by jar milling of Ti and 60 min-premilled Si powder mixture for 48 hr and high -energy PSZ ball-milling in a steel vial for 360 min. The formation of each titanium silicide was characterized by a slow reaction rate as the reactants and product(s) coexisted for a certain period of time. The formation of $Ti_3Si$ and $TiSi_2$ and the reaction rates appeared to be influenced by the Si particle size, the homogeneity of the powder mixtures and the milling medium materials.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.105-110
• /
• 2004

In this study the possibility to obtain a homogeneous mixture and to produce solid solutions and intermetallic compounds of Fe and Al nano particles by simultaneous pulsed wire evaporation (S-PWE) have been investigated. The Fe and Al wires with 0.45 mm in diameter and 35 mm in length were continuously co-fed by a special mechanism to the explosion chamber and simultaneously exploded. The characteristics, e.g., phase composition, particle shape, and specific surface area of Fe-Al nano powders have been analyzed. The synthesized powders, beside for Al and $\alpha$-Fe, contain significant amount of a high-temperature phase of $\gamma$-Fe, Fe Al and traces of other intermetallics. The phase composition of powders could be changed over broad limits by varying initial explosion conditions, e.g. wire distance, input energy, for parallel wires of different metals. The yield of the nano powder is as large as 40 wt ％ and the powder may include up to 46 wt % FeAl as an intermetallic compound.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.132-137
• /
• 2015

The purpose of this paper was to investigate the effects of solution treatment time and Sr-modification on the microstructure and property of the Al-Si piston alloy. It was found that as-cast microstructures of unmodified and Sr-modified Al-Si alloys consisted of a coarse acicular plate of eutectic Si, $Cu_3NiAl_6$ and $Mg_2Si$ phases in the ${\alpha}$-Al matrix but different in size and morphology. Both size and inter-particle spacing of Si particles were significantly changed by increasing of the solution treatment time. After a short solution treatment, the coarse acicular plate of the eutectic Si appears to be fragmented. Fully modified microstructure of Sr-modified alloy can reduce the solution treatment time to shorter compared to unmodified alloy. The maximum of a peak hardness value is found in the very short solution treatment of both Al-Si piston alloys. Compared to 10 h solution treatment, the solution treatment of 2-4 h is sufficient to achieve appropriate microstructures and hardness. The short solution treatment is very useful to increase the productivity and to reduce the manufacturing cost of the Al-Si piston alloys.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.46-52
• /
• 1991

The hydroxyapatite powders were prepared by the reaction of Ca(CH3COO)2$.$H2O and H3PO4 in aqueous solution. Effect of Ca/P mole ration and pH value on the powder characteristics were investigated. For phosphoric acid was dissociated to PO43- ion above pH 10, the preparation condition of hydroxyapatite by H3PO4 solution had this value. Dried powders were agglomerated each other. The mean agglomerate particle diameter was minimum when the condition was pH 11, Ca/P=1.75 and its specific surface area was 97㎡/g. All powders had poor crystallinity and small CO2. It prevented CaCO3 from using aspirator in preparation and maturing time. In most cases, hydroxyapatite was decomposed into ${\beta}$-TCP at more than 800$^{\circ}C$, into ${\alpha}$-TCP at 1200$^{\circ}C$. However non-decomposed hydroxyapatite was remained in Ca/P=1.85.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.372-378
• /
• 2005

Ni/YSZ ($Y_2O_3$-stabilized $ZrO_2$) composite powder for a cathode material in high temperature electrolysis(HTE) was synthesized by a mechanical alloying method with Ni and YSZ powder. Microstructure of the composite and cell thickness for HTE reaction has been analyzed with various techniques of XRD, SEM to investigate effects of fabrication conditions. Employing the composite material, furthermore, the unit cell for HTE has been studied to evolve hydrogen from water. XRD patterns showed that the composites after wet mechanical alloying were composed of respective nano-sized crystalline Ni and YSZ. While ethanol as additive for mechanical alloying increased to $20\;{\mu}m$ of average particle size of the composites, alpha-terpineol effectively decreased to sub-micro size of that. This study has been found out the evolution of hydrogen by HTE reaction employing the fabricated cathode material, showing 1.4 ml/min of $H_2$ generation rate as increasing $20\;{\mu}m$ of cathode thickness.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권2호
• /
• pp.139-144
• /
• 2003

Over 350 million people worldwide are chronic carriers of hepatitis B virus (HBV). Chronic viral infections of the liver can progress to cirrhosis, which may ultimately lead to hepatic failure or the development of hepatocellular carcinoma. There are two antiviral drugs on the market approved for clinical management of chronic HBV infections; interferon-alpha and the nucleoside analog lamivudine. However, they showed adverse side-effects. In the rational drug design for such therapies we would like to utilize antiviral drugs that inhibit the HBV replication in the liver. Investigation of natural extracts of silkworm exhibiting antiviral potential was held in the functional HBV polymerase activity and the release of virion particle in the HepG2.2.15 cell lines. HBV-producing transgenic mouse fed with silkworm DNJ molecule was shown as an inhibitor of serum HBV particles. We could represent this DNJ molecule as an antiviral potential complementing conventional therapies after preclinical tests against WHBV-infected animal model, woodchuck.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.783-790
• /
• 1998

The characterization of the complexation reaction of PVA and Al(III) ion at different pH and the sint-ering behaviour of UO2 containing the PVA-Al(III) complexes were investigated. Compared with pure PVA powder the complexed PVA-Al(III) powder had compacter shape and lower decomposition temperature The major phase of PVA-Al(III) complex decomposed at 90$0^{\circ}C$ was $\alpha$-Al2O3 The PVA-Al(III) complex formed at pH 9 had the lowest relative viscosity the highest Al content of 36% and the smallest particle size of 19${\mu}{\textrm}{m}$ While the pure UO2 pellet appeared with bimodal one. The grain size of the pure UO2 pellet was 7${\mu}{\textrm}{m}$ but that of the PVA-Al(III) complex added UO2 pellet was increased up to 36${\mu}{\textrm}{m}$ The largest grain size was ob-tained when the PVA-Al(III) complex formed at pH9 was added and the PVA-Al(III) complex formed at pH 11 had the greatest effect on increasing pore size.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.416-422
• /
• 1989

The particle size of synthesized SiC powders was decreased with increasing carbon content when the mixture of carbon and silica was carbonized at 1, 45$0^{\circ}C$ after hydrolysis of the mixture with the ranges of 3.1 to 3.5 in the mole ratio of Carbon/Alkoxide. The reacted fraction of $\beta$-SiC nearly had nothing to do with the mole ratio of Carbon/Alkoxide. When the reaction was made by adding 0.5wt% additives in the composition of 3.1 in the mole ratio of carbon/alkoxide, the additives decreased the yield of $\beta$-SiC and its sequence was Ba2O3>B>Fe>Al>Al2O3>Si. The effect of additives promoted the transformation of $\beta$-SiC to $\alpha$-SiC form and shwoed the increasing tendency of lattice constant. The two colors of $\beta$-SiC powder came out : one was the black grey with addition of Al, Al2O3 and B the other the light grey with addition of Fe, B2O3 and Si.

• 한국대기환경학회지
• /
• 제27권4호
• /
• pp.436-442
• /
• 2011

In this study, the Total Volatile Organic Compounds (TVOC) emitted from wood-based panels were compared by two analytical methods using the GC/FID and the GC/MS. Japanese Larch, Yellow Poplar, Particle Board (PB) and Medium Density Fiberboard (MDF) were selected as target materials. Major compounds emitted from the panels were Toluene, ${\alpha}$-pinene, ${\beta}$-pinene and limonene. In case of TVOC using GC/FID method, MDF E2 (1,497 ${\mu}g/m^3$) revealed the highest concentration among all wood-based panels, while Japanese Larch (1,772 ${\mu}g/m^3$) showed the highest value with respect to GC/MS method. Furthermore, it was found that the amount of VOC emitted from panels was different depending upon analytical methods. This significant difference was attributed to analytical sensitivities of GC/FID and GC/MS for various VOC. Besides, it was found that the composition ratios of main VOC compounds were not significantly different.