• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.697-704
• /
• 1998

Background: Asthma is a chronic inflammatory disease of the airways characterized by a marked infiltration of eosinophils in the bronchial mucosa. Asthmatic bronchial mucosa produces many factors described as being chemotactic for inflammatory cells. IL-5, RANTES, and MCP-1 alpha are the chemotactic factors for eosinophils, but their roles are controversial. Recently eotaxin that is a potent eosinophil chemoattractant cytokine was detected in a guinea-pig model of allergic airway inflammation, and human eotaxin was cloned. Eotaxin is a specific chemoattractant for eosinophils, but its role in asthma is not confirmed. We examined the in vivo expression of eotaxin in bronchi of asthmatic patients. Methods : 11 asthmatics and 2 normal controls were enrolled. All subjects were underwent bronchoscopy with bronchial biopsies in 2nd or 3rd carina. RNA extraction from biopsy samples was done by acid-guanidium method. Semi-quantitaive RT-PCR was done for evaluation of eotaxin mRNA expression The extent of eosinophil infiltration was evaluated by counting the eosinophils in submucosa in HPF of microscope. Results : Eotaxin mRNA expressed in symptomatic, uncontrolled asthma. Steroid inhibited expression of eotaxin mRNA in asthma. Expression of eotaxin mRNA correlated with eosinophil infiltration in bronchial tissues. Conclusion: Expression of eotaxin mRNA increases in uncontrolled asthma and eotaxin is involved in the recruitment of eosinophils.

• KSBB Journal
• /
• v.19 no.2
• /
• pp.93-97
• /
• 2004

We investigate the effect of enzyme pretreatment using protease, carbohydrase, and lipase on improvement of sludge treatment efficiency by measuring SCOD and TCOD. The enzyme-pretreatment increases SCOD of excess sludge. In addition, the amount of sludge reduction during digestion, in terms of SCOD and TCOD, are enhanced by enzyme-pretreatment. Among pretense, carbohydrase, and lipase, pretense showed the best enhancement of the sludge treatment efficiency. Sludge digestion followed by ozone and enzyme treatments showed more effective sludge treatment when compared with ozone treatment alone. Therefore, we expect that enzyme pretreatment can be used as a useful tool for enhancing the sludge treatment efficiency.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.475-483
• /
• 2009

Subjects of the research were 668 elderly people aged over 65 from Gangneung city. OHIP 14 went through a first translation from English to Korean, discussion among experts, a second translation from Korean to English, and then the translation was approved. After the primary and main research were carried out, validity and correlation coefficient with the outcome of oral and mental health examination were studied. OHIP 14 in terms of the perception of oral health was relevant to the perception of overall health and oral health, the necessity of dental treatment, the satisfaction about oral health, the level of pain from observation, and the satisfaction about artificial tooth. OHIP 14 on account of oral health state was related to the number of present natural teeth, the necessity of dental treatment, and the status of no teeth. OHIP 14 according to overall health was correlated to the number of ailments, the state of mind, nerve systems, bones and sinews, digestive systems, urogenital systems, cerebrovascular systems, respiratory systems, eyes, ears, and dementia. OHIP 14 according to the perception of oral health showed a significant difference in the perception of overall health and oral health, the level of pain in terms of observation, and the satisfaction on artificial tooth. OHIP 14 on account of oral health state demonstrated a meaningful difference in the number of present natural teeth, the necessity of dental treatment, and status of no teeth. OHIP 14 in terms of overall health exhibited considerable difference in the state of mind, nerve systems, bones and sinews, digestive systems, cerebrovascular systems, respiratory systems, ears, and dementia. From the study, it was proven that there was relevance between the validity of OHIP 14 and the perception of oral health, the state of oral health, and the state of overall health in the experiment on some Korean elderly people.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1245-1255
• /
• 1997

Background : Rifampicin(RFP) is a key component of the antituberculous short-course chemotherapy and the RFP resistance is a marker of multi-drug resistant(MDR) tuberculosis. RPoB gene encodes the $\beta$-subunit of RNA polymerase of M. tuberculosis which is the target of RFP. And rpoB gene mutations are the cause of RFP resistance of M. tuberculosis. Although several reports showed that PCR-SSCP would be a rapid diagnostic method for identifying the RFP resistance, there were few reports Performed using direct, clinical specimens. So we Performed PCR-SSCP analysis of rpoB gene of M. tuberculosis in direct, clinical specimens. Methods : 75 clinical specimens were collected from patients at Asan Medical Center from June to August 1996. After PCR of IS 6110 fragments, 43 both AFB smear-positive and IS6110 fragment PCR-positive specimens were evaluated. The RFP susceptibility test was referred to the referral laboratory of the Korean Tuberculosis Institute. DNA was extracted by bead beater method. And heminested PCR was done using 0.1ul(1uCi) [$\alpha-^{32}P$]-dCTP. SSCP analysis was done using non-denaturating MDE gel electrophoresis. Results : The results of PCR of IS6110 fragments of M. tuberculosis were positive in 55(73%) cases of 75 AFB smear-positive clinical specimens. Of the 55 specimens, RFP susceptibility was confirmed in only 43 specimens. Of the 43 AFB smear-positive and IS6110 fragment-positive specimens, 29 were RFP susceptible and 14 were RFP resistant. All the RFP susceptible 29 strains showed the same mobility compared with that of RFP sensitive H37Rv in SSCP analysis of ropB gene. And all the other RFP resistant 13 strains showed the different mobility. In other words they showed 100% identical results between PCR-SSCP analysis and traditional susceptibility test. Conclusion : The PCR-sseP analysis of rpoB gene in direct clinical specimens could be used as a rapid diagnostic method for detecting RFP resistant M. tuberculosis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.6
• /
• pp.453-458
• /
• 2001

The Rural Development Administration (RDA) of Korea now operates a system called Rice Variety Selection Tests (RVST), which are now being implemented in eight Agricultural Research and Extension Services located in eight province RVST's objective is to provide accurate yield estimates and to select well-adapted varieties to each province. Systematic evaluation of entries included in RVST is a highly important task to select the best-adapted varieties to specific location and to observe the performance of entries across a wide range of test sites within a region. The rice yield data in RVST for ordinary transplanting in Kangwon province during 1997-2000 were analyzed. The experiments were carried out in three replications of a random complete block design with eleven entries across five locations. Additive Main effects and Multiplicative Interaction (AMMI) model was employed to examine the interaction between genotype and environment (G$\times$E) in the biplot form. It was found that genotype variability was as high as 66％, followed by G$\times$E interaction variability, 21％, and variability by environment, 13％. G$\times$E interaction was partitioned into two significant (P＜0.05) principal components. Pattern analysis was used for interpretation on G$\times$E interaction and adaptibility. Major determinants among the meteorological factors on G$\times$E matrix were canopy minimum temperature, minimum relative humidity, sunshine hours, precipitation and mean cloud amount. Odaebyeo, Obongbyeo and Jinbubyeo were relatively stable varieties in all the regions. Furthermore, the most adapted varieties in each region, in terms of productivity, were evaluated.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.237-257
• /
• 2014

This study is the process of performing the interdisciplinary fusion study between multiple fields by identifying the status on the previous artistic education considering the brain scientific mechanism of image creativity and brain-based learning principles. In recent years, producing the educational methods of each field as the fusion study activities are emerging as the trend and thanks to such, the results of brain-based educational fusion studies are being presented for each field. It includes artistic fields such as music, art and dance. In other words, the perspective is that by understanding the operating principles of the brain while creativity and learning is taking place, when applying various principles that can develop the corresponding functions as a teaching method, it can effectively increase the artistic performance ability and creativity. Since the animation drawing should be able to intuitively recognize the elements of movement and produce the communication with the target beyond the delineative perspective of simply drawing the objects to look the same, it requires the development of systematic educational method including the methods of communication, elements of higher cognitive senses as well as the cognitive perspective of form implementation. Therefore, this study proposes a literature study results on the artistic education applied with brain-based principles in order to design the educational model considering the professional characteristics of animation drawing. Therefore, the overseas and domestic trends of the cases of brain-based artistic education were extracted and analyzed. In addition, the cases of artistic education studies applied with brain-based principles and study results from cases of drawing related education were analyzed. According to the analyzed results, the brain-based learning related to the drawing has shown a common effect of promoting the creativity and changes of positive emotion related to the observation, concentration and image expression through the training of the right brain. In addition, there was a case of overseas educational application through the brain wave training where the timing ability and artistic expression have shown an enhancement effect through the HRV training, SMR, Beta 1 and neuro feedback training that strengthens the alpha/seta wave and it was proposing that slow brain wave neuro feedback training contributes significantly in overcoming the stress and enhancing the creative artistic performance ability. The meaning of this study result is significant in the fact that it was the case that have shown the successful application of neuro feedback training in the environment of artistic live education beyond the range of laboratory but the use of the machine was shown to have limitations for being applied to the teaching methods so its significance can be found in providing the analytical foundation for applying and designing the brain-based learning principles for future animation drawing teaching methods.

• Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.218-224
• /
• 2000

The efforts were made to optimite ethanol extraction from persimmon leaf with the time of extraction$(1.5{\sim}2.5\;hrs)$, the temperature of extraction$(70{\sim}90^{\circ}C)$, and the concentration of ethanol$(0{\sim}40%)$ as three primary variables together with several functional characteristics of persimmon leaf as reaction variables. The conditions of extraction was best fitted by using response surface methodology through the center synthesis plan, and the optimal conditions of extraction were established. The contents of soluble solid and soluble tannin went up as the concentration of ethanol went up and the temperature of extraction went down, and the turbidity went down as the concentration of ethanol went down. Electron donation ability was hardly affected by the extraction temperature and had the tendency to go up as the concentration of ethanol went up. The inhibitory activity of xanthine oxidase(XOase) had the tendency to go up as both the concentration of ethanol and the temperature of extraction went up. The inhibitory activity of angiotensin converting enzyme(ACE), the significance of which still was not recognized, showed the maximum when the concentration of ethanol was 27%. In result, the optimal conditions of extraction was the extraction time of two hours, the extraction temperature of $75{\sim}81^{\circ}C$, and the ethanol concentration of $33{\sim}35%$.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.177-183
• /
• 2009

The aim of this study was to evaluate the marginal and internal gaps in CEREC3 CAD/CAM inlays of three different preparation designs. CEREC3 Inlays of three different preparation designs (n=10) were fabricated according to Group I-conventional functional cusp capping/shoulder preparation, Group II-horizontal reduction of cusps and Group III-complete reduction of cusps/shoulder preparation. After cementation of inlays. the bucco-lingual cross section was performed through the center of tooth. Cross section images of 20 magnifications were obtained through the stereomicroscope. The gaps were measured using the Leica application suite software at each reference point. Statistical analysis was performed using one-way ANOVA and Tukey's test (${\alpha}<0.05$). The marginal gaps ranged from 80.0 to $97.8{\mu}m$ for Group I, 42.0 to $194.8{\mu}m$ for Group II, 51.0 to $80.2{\mu}m$ for Group III. The internal gaps ranged from 90.5 to $304.1{\mu}m$ for Group I, 80.0 to $274.8{\mu}m$ for Group II, 79.7 to $296.7{\mu}m$ for Group III. The gaps of each group were the smallest on the margin and the largest on the horizontal wall. For the CEREC3 CAD/CAM inlays, the simplified designs (groups II and III) did not demonstrate superior results compared to the traditional cusp capping design (group I).

• The Korean Journal of Food And Nutrition
• /
• v.16 no.1
• /
• pp.7-14
• /
• 2003

This study mainly focused on to investigate the effects of Schizandra chinensis on the growth of a bacterium, CS6 which was isolated from kimchi. CS6 was final]y identified to lactobacillus plantarum that caused acidification of kimchi. The ethanolic extract of Schizandra chinensis(EES) inhibited the growth of L. plantarum. Minimum inhibition concentration of crude EES on L. plantarum was 62.5mg/$m\ell$. In broth culture, 5$\mu\textrm{g}$/$m\ell$ of EES completely inhibited the growth of L. plantarum during fermentation. The addition of 0.4% of EES has no apparent effect on quality including the taste and color on kimchi. It was expected that EES-containing kimchi could extend the period of preservation. Analysis of organic acids in water fractions of EES was carried out by HPLC. It is apparent that antimicrobial active fractions contained the highest concentration of succinic acid, a little tartaric acid and malic acid. Among these organic acids, succinic acid showed the strong inhibitory effect against L. plantarum CS6 in vitro. Succinic acid-containing kimchi with a concentration of 0.4 and 0.5% had the inhibitory effect on growth of L. plantarum. Inhibitory effect of EES on amylase, cellulase and pectinase was also tested. In conclusion, the present experiment demonstrated that EES inhibited the growth of L. plantarum, and various enzyme activity. EES-containing kimchi was sustained the hardness, and initial acidity during fermentation. EES was considered as the possible additive of kimchi process and EES added in kimchi increase the quality, and storage period of kimchi.