• Journal of the Korean Statistical Society
• /
• 제24권1호
• /
• pp.91-109
• /
• 1995

The rate of convergence to a random variable S for an almost certainly convergent series $S_n = \sum^n_{j=1} X_j$ of independent random variables is studied in this paper. More specifically, when $S_n$ converges to S almost certainly, the tail series $T_n = \sum^{\infty}_{j=n} X_j$ is a well-defined sequence of random variable with $T_n \to 0$ a.c. Various sets of conditions are provided so that for a given numerical sequence $0 < b_n = o(1)$, the tail series strong law of large numbers $b^{-1}_n T_n \to 0$ a.c. holds. Moreover, these results are specialized to the case of the weighted i.i.d. random varialbes. Finally, example are provided and an open problem is posed.

• 한국컴퓨터그래픽스학회논문지
• /
• 제17권2호
• /
• pp.37-43
• /
• 2011

스마트 폰을 비롯한 다양한 임베디드 환경에서 널리 쓰이는 2D 벡터 그래픽스 기술에는 OpenVG와 SVG Tiny가 대표적이다. 고해상도 화면에서 높은 재생속도의 벡터 그래픽스 응용을 위해서는, 이들을 효과적으로 가속해야 한다. 현재까지 OpenVG와 SVG Tiny의 구현방법에는, 전용 그래픽스 칩과 같은 하드웨어로 구현하는 방법과, 전체를 소프트웨어로 구현하는 방식이 있었다. 현재 시장에서 사용 가능한 벡터 그래픽스 전용 칩들은 상대적으로 고가에 큰 전력을 소비한다. 반면, 소프트웨어 구현에서는 100%에 가까운 CPU 사용률에서도 상대적으로 낮은 성능을 보이고, 이 경우에, 다른 멀티-쓰레드 응용프로그램들을 방해할 가능성이 컸다. 본 논문에서는, 현재 미디어 재생 기기들과 휴대폰들에 광범위하게 장착되어 있는 상용 멀티미디어용 하드웨어들을 사용하여 OpenVG와 SVG Tiny 양쪽 모두를 가속하는 비용대비 효과적인 방법을 제시한다. 멀티미디어 프로세서들을 효과적으로 사용함으로써, CPU 사용률과 전력소모량을 줄이면서도 OpenVG와 SVG Tiny를 최소 3.5배에서 최대 30배까지 성공적으로 가속할 수 있었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.146-153
• /
• 1997

An experimental study was performed of natural-convection downward smolder spread across a sawdust bed peripherally enclosed with an insulating container, to examine the effect of the open- ing condition at the top end on downward smolder spread. Experiments were conducted by using relatively coarse sawdust and 25-cm-long cylindrical container The variations of temperature profiles along the bed axis with time were determined far different opening conditions and were com-pared with those in smolder spread from open top to open bottom. It was shown that the smolder zone initiated from open top toward closed bottom penetrates the bed with keeping high peak temperature like the case of open top to open bottom spread, although mean spread rate is smaller. This indicates that the downward smolder zone can be sustained stably if sufficient air or oxygen Is supplied from the back of it by natural convection even if upward draft entering from the bottom of the bed is absent. When the top end was partially closed by mounting a cover after stable smolder spread had begun from open top toward open bottom, the temperature at the peak decreased more than 200 K and the smolder zone became to spread with thickening residue. In this case, the shape of temperature profiles continuously changed or decayed until end-effect at the open bottom end enhanced the reaction. The temperature at the shrunk peak, free from the end-effect, was almost identical with the temperature at the exothermic oxidative-degradation zone in smolder spread from open top to open bottom. from these results, it can be inferred for natural-convection downward smolder spread that the oxidation reaction of the char is very sensitive to the oxygen supply by natural convection in the space above the smolder zone, and that the top end opening condition strongly alters the completeness of reactions, structure, and behavior of the smolder zone.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권2호
• /
• pp.128-132
• /
• 2009

In this paper, we introduce the concept of IVF weakly M-continuity and investigate some characterizations for IVF weakly M-continuous mappings between an IVF minimal space and an IVF topological space.

• 치과방사선
• /
• 제9권1호
• /
• pp.13-18
• /
• 1979

The purpose of this study was to investigate the radiographic images of Temporomandibular joint trouble patients. This study included 186 patients with the chief complaints of TMJ pain and dysfunction. Their age ranged from 17 to 68 years. All patients were identified in the department of Dental mary of College of Dentistry, Seoul National University, Apr. 1978 to Jun. 1979. The author has observed the radiographic variations of two positions of condylar head taken by modified transcranial oblique-lateral projection, which are one in centric occlusion and the other in 1 inch(2.54㎝) mouth open. The results were obtained as follows; 1. In centric occlusion, the distances and positional relationship between the summit of condylar head and the deepest point of articular fossa revealed more or less large variations; Normal range is of 37.9%, anterior displacement of 37.3% and posterior displacement of 22.6%. 2. In the horizontal movement of condylar heads when on 1 inch mouth open, it was revealed that normalrange was of 46.5%, anterior displacement of 12.3%, posterior displacement of 41. 1 %. 3. In the positional interrelationship of both condylar heads when on 1 inch mouth open, it was revealed that symmetry(71. 5%) occurred approximately 2.5 times as many as asymmetry. 4. In both centric occlusion and 1 inch mouth open, it was showed that almost all estimated figures were greater in male than in female, and in the horizontal movement of condylar head when on 1 inch open, it was showed that hypermobility was dominant in male and hypomobility in female.

• 소성∙가공
• /
• 제21권5호
• /
• pp.319-323
• /
• 2012

In order to predict the internal void closing behavior in open die forging process, multiple scale modeling has been developed and applied. The huge size difference between ingot and inner void makes it almost impossible to simultaneously model the actual loading conditions and the void shape. Multiple scale modeling is designed to integrate macro- and micro- models effectively and efficiently. The void closing behavior was simulated at 39 different locations in a large ingot during upsetting and cogging. The correlation between the closing behavior and variables such as effective plastic strain and maximum compressive strain was studied in order to find an efficient measure for predicting the soundness of the forging.

• Journal of Chest Surgery
• /
• 제13권1호
• /
• pp.41-47
• /
• 1980

Fifty one consecutive patients undergoing open heart surgery, twenty eight congenital and twenty three acquired heart disease, were studied between May and August 1979 in Dept. of Thoracic and Cardiovascular Surgery SNUH. During the same time 10 patients of PDA were included in this study as control group. Four out of fifty one OHS patients, two ASD and two pulmonic stenosis patients, were operated without aortic cross-clamp. In all patients, serial determination of total level of creatine phosphokinase [CPK], lactic dehydrogenase [LDH], glutamic oxaloacetic transaminase [SGOT] were made preoperatively, operative day [immediate post-op], and post-operative days up to 7th day. Electrocardiograms were also evaluated serially. Open heart surgery patients were divided into two groups; Group A was aorta clamp time beyond SO minutes, and Group B was below 50 minutes. The peak level of each enzyme was compared, and electrocardiographic changes were also compared between groups. Although the electrocardiographic changes were more frequent in Group A [50%] than Group B [24%], the peak levels of each enzymes were almost same in Group A and Group B.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.253-267
• /
• 1987

The purpose of this study was to improve limitations and disadvantages of the mechanical pantograph and the Visi-Trainer, and to design the reliable and reproducible device mandibular movement tracking device (MMTD) that is more simple, convenient and save the chair time than the mechanical pantograph and Visi-Trainer. MMTD was consist of head frame, horizontal bar, condylar path tracking stylus holders, anterior path tracking stylus holder, two condylar path plastic recording plates, one anterior path plastic recording plate, toggles and open occlusal clutch. To prove the reliability and reproducibility of MMTD, a five adults were selected and mandibular condylar movement was recorded one time by the mechanical pantographic tracing and MMTD. The border movement recording of the mandibular incisor (frontal, sagittal and horizontal) was also recorded by Visi-Trainer and the MMTD. The obtained results were as follows; 1. The condylar movement path (sagittal, horizontal) of the MMTD was not coincidence with that of mechanical pantograph. 2. Measurements of the angulation which established between working and balancing path records by use of the mechanical pantograph and MMTD, there was no significance. 3. In a view of MMTD's reproducibility, there was revealed almost similar recording pattern. 4. The border movement recording of the mandibular incisor by the MMTD and the Visi-Trainer showed almost same reliability and reproducibility. 5. The subjects were able to his original mandibular movements by use of open occlusal clutch in the MMTD.

• Journal of Chest Surgery
• /
• 제23권4호
• /
• pp.750-757
• /
• 1990

Empyema with bronchopleural fistula is an uncommon, but serious problem. Early diagnosis and adequate drainage of the empyema cavity are well established principles for the initial management of this condition and will enable patient to recover from the toxic effects of loculated pus. 37 patients of empyema with bronchopleural fistula were treated at the department of the chonbuk National University Hospital between 1981 and 1988. The age group of fifty and sixty decades occupied 64.8%. Bacteriologic cultures of the pus were postive in 56.8%. The most common organism of the culture was staphylococci(42.9%). And the others were Pseudomonas(19%). Klebsiella(14.3%), and E. doli. No growth of pathologic organism was reported 43.2%. 24 patients of empyema with bronchopleural fistula were nonoperative causes : There were 10 pulmonary tuberculosis, 3 abscess, 9 ascending infection, one bronchiectasis and one tumor, respectively. The remaining 13 were occurred as postoperative complications ; pneumonectomy in 6, lobectomy in 4, decortication in 2, and lobectomy with segmentectomy in 1. When used as the initial mode of drainage, closed thoracostomy was performed to almost all of the patients, but 4 patients were died during this treatment. Main operations were performed except 4 died patients ; open thoracostomy in 21, open thoracostomy with myoplasty in 3, decortication in 5, decortication with resection in 3, and completion pneumonectomy in 1. Open thoracostomy was performed in 21 patients which results were favorable except one death. Permanent open thoracostomy is an old but still useful minor operation in patients with empyema with bronchopleural fistula. The overall mortality rate was 15% (6 patients) and the causes of the death were respiratory insufficiency or sepsis, or both.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2462-2467
• /
• 2009

This paper proposes a dual band branch line coupler (BLC) using a composite right/left handed (CRLH) transmission line. The existing dual band BLCs with open stubs require hundreds of line impedance for the open stub as the frequency bands approach to each other, so it has been almost impossible to realize them. However in the proposed BLC, a CRLH transmission line replaces the open stub with an extremely high line impedance so that the BLC circuit may be realized even two frequencies are close to each other. As an example, a dual band BLC operating at 1800MHz and 2300MHz (the frequency ratio is 1:1.28) is designed and measured. Open stubs with $560\Omega$ line impedance are replaced by CRLH transmission lines for realizing the dual band BLC. The measured performances prove that the dual band operation is well acceptable and the proposed design method is successful even the ratio between two frequencies is not around two nor more.