• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.523-529
• /
• 2006

Nowadays, a logistics and distribution center plays an important role in all industries. In addition to its traditional functions as a storage and unloading facility the distribution center serves as an assembly place for information, a source of information, and a turning point for the flow of information. On account of the above-mentioned reasons, each and every industry has increasing need of logistics distribution center. At this juncture, the present author thinks that it is necessary to make a study of the establishment and maximization of a ceramics logistics distribution center as a way for activating the ceramics industry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.442-445
• /
• 2001

In this study, microstructural and dielectric properties of P $b_{0.83}$(L $a_{0.2}$C $e_{0.8}$)$_{0.08}$Ti $O_3$PCT ceramics as a function of Mn $O_2$ addition were investigated for 30MHz ceramic resonator application. Grain size was gradually increased according to the increase of Mn $O_2$ addition amount and showed the highest value of 1.502${\mu}{\textrm}{m}$ at the 0.9wt% Mn $O_2$. Moreover, density showed the highest value of 7.582 g/$\textrm{cm}^2$ at the 0.7wt% Mn $O_2$. All the composition ceramics, curie temperature was nearly constant around 33$0^{\circ}C$.EX>.>.>.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.274-275
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator application. At the PMN-PZN-PZT ceramics, the influence of the ball-mill time on piezoelectric characteristics was investigated. All the specimens improved according to the increase of the ball-mill time increase. The specimen showed the optimum value when ball-mill time is 60 hour. Their optimum values were density=$7.93g/m^3$, ${\varepsilon}_r=1371$, kp=0.551, Qm=1609, $d_{33}=321pC/N$, respectively.

• Korean Journal of Metals and Materials
• /
• v.50 no.9
• /
• pp.691-695
• /
• 2012

Calcium phosphate ceramic composites, consisting of hydroxyapatite(HA) and tricalcium phosphate (TCP), were fabricated by solid state sintering in order to investigate the effect of their initial compositions on microstructural evolutions and biocompatibility. All the sintered calcium phosphate ceramics exhibited almost full densification, while the grain growth of the composites increased with an increasing TCP content in the green body. The TCP phase transformed into a Ca-deficient HA phase during sintering via the diffusion of calcium ions from the HA phase into the TCP phase. The phases formed in the composites significantly affected the biocompatibility of the composites. The HA-matrix ceramic composites with TCP had a better cellular response than the pure HA ceramics, presumably due to the newly formed Ca-deficient HA.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.99-111
• /
• 1999

The purpose of this study was to evaluate crystalline silica contents in airborne respirable dusts from various manufacturing industries and to compare analytical ability of two different methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy(FTIR). Various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: ceramics, brick, concrete, and abrasive material etc. The personal respirable dust samples were collected using l0mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size. polyvinylchloride (PVC) filters as collection media. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 7500, and 7602 for dust collection and quartz analysis. A total of 48 samples were collected from these industries. Initial analyses of these samples showed log-normal distributions for dust and quartz concentrations. Some results from ceramics and stone exceeded current Korean Occupational Exposure Limits. The average concentrations of personal respirable dust by cyclone were 0.43, 0.24, 0.26, 0.42, 0.53 and $0.29mg/m^3$ in ceramics, stone, concrete, glass, briquets, and others, respectively. A comparison of performance of two analytical methods for quantifying crystalline silica was performed using data from ceramics. The results showed that no significant difference was found between two methods for ceramics. The mean crystalline silica contents determined by XRD were 3.41 % of samples from briquets and 7.18 % from ceramics and were 2.58 % from concrete and 10.33 % from ceramics by FTIR. For crystalline silica analysis, two analytical techniques were highly correlated with $r^2=0.81$ from ceramics. Both cristobalite and tridymite were not detected by XRD and FTIR.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.367-371
• /
• 2014

We investigated dielectric relaxation properties of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics by addition (0~0.3 wt%) of $(Ba,Ca)SiO_3$ glass frit. All composition of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ added $(Ba,Ca)SiO_3$ glass frit showed the same crystallographic properties, coexistence of orthorhombic and tetragonal phase. By increasing addition of $(Ba,Ca)SiO_3$ glass frit, the Curie temperatures of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were decreased, whereas maximum dielectric constants of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were dramatically increased. Especially the deviations of Curie temperature $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were increased by increasing amount of $(Ba,Ca)SiO_3$ glass frit, and it indicated that $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics added $(Ba,Ca)SiO_3$ glass frit have relaxor characteristics.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.98-100
• /
• 2003

The microwave dielectric properties and microstructure of the $0.7Mg_4Ta_2O_9-0.3CaTiO_3$ ceramics were investigated. All sample of the $0.7Mg_4Ta_2O_9-0.3CaTiO_3$ ceramics were prepared by conventional mixed oxide method. The sintering temperature was $1375^{\circ}C{\sim}1450^{\circ}C$. The structural properties of the $0.7Mg_4Ta_2O_9-0.3CaTiO_3$ ceramics were investigated by X-ray diffractormeter. According to the X-ray diffraction patterns of the $0.7Mg_4Ta_2O_9-0.3CaTiO_3$ ceramics, the major phase of the hexagonal $Mg_4Ta_2O_9$ were presented. In the case of the $0.7Mg_4Ta_2O_9-0.3CaTiO_3$ ceramics sintered at $1425^{\circ}C$, density, dielectric constant, quality factor were $5.799g/cm^2$, 23.26, 40,054 GHz, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.659-662
• /
• 2004

The microwave dielectric properties of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics with sintering temperature were investigated. All the sample of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics prepared by conventional mixed oxide method and sintered at $1400^{\circ}C-1450^{\circ}C$. According to X-ray diffraction patterns of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics, major phase of the hexagonal $Mg_4Ta_2O_9$ phase were showed. Porosity of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics were reduced with increasing sintering temperature, but the bulk density was increased. In the case of $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics sintered at $1425^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF) were 13.69, 63,754GHz and -29.37 $ppm/^{\circ}C$, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.2
• /
• pp.84-88
• /
• 2021

The change of the photoluminescence properties of La2O3-CaF2-Al2O3-SiO2 glass-ceramics doped with rare earth material, that is used as laser and optical sensors, was analyzed according to heat treatment temperature. The heat treatment conditions for fabricating glass-ceramics were obtained through non-isothermal thermal analysis, and X-ray diffraction analysis was performed to determine the degree of crystal growth and kinds of crystal phases generated according to the heat treatment temperature. Using Scherrer's equation, it was predicted that crystals with a size of 25~40 nm would be generated inside the glass-ceramics. Photoluminescence (PL) analysis showed that the specimens heat-treated at 660℃ to 670℃ for 1 hour had the highest PL intensity. Also, from the CIE color coordinate analysis, all glass-ceramics specimens emitted red-orange light regardless of the heat treatment condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.35-39
• /
• 2019

In this study, we investigated the optimum calcination temperature of lead-free $0.74(Bi_{0.5}Na_{0.5})TiO_3-0.26SrTiO_3$(BNST) piezoelectric ceramics by analyzing the crystal structure, dielectric properties, and electric field-induced strain behavior. BNST ceramics prepared by conventional solid-state reaction methods at various calcination temperatures according to the industrial standard. All samples of BNST ceramics were subsequently sintered at $1,175^{\circ}C$ for 2 h. Crystal structure classification of the ceramics showed a single perovskite phase, with no second phase detectable for the samples calcined at $750^{\circ}C$ or higher. BNST samples calcined at $850^{\circ}C$ exhibited the most optimal values for itsand the common physical parameters of $density=5.518g/cm^3$, ${\varepsilon}=1,871.837$, $tan{\delta}=0.047$, and ${d_{33}}^*=874pm/V$.