• Korean Journal of Veterinary Research
• /
• v.51 no.3
• /
• pp.193-201
• /
• 2011

An attenuated vaccine strain AVR1/08 of Korean respiratory type of infectious bronchitis virus (IBV) was developed by 89th passages of IBV D85/06 strain in chicken eggs. The AVR1/08 strain had higher virus titer at least 20 times ($10^{1.3}$) than the parent virus D85/06 by egg inoculation method. The AVR1/08 strain had a single point mutation (S to Y) at position 56 of spike protein of IBV compared to parent virus IBV D85/06 strain. The mutation was observed consistently at viruses after 47th passage in chicken eggs. The AVR1/08 strain showed no virulence even after 6 passages in chickens and all chickens inoculated induced anti-IBV antibody 14 days after vaccination. The AVR1/08 strain had broad protective efficacy against QX type Korean nephropathogenic virus (Q43/06 strain), KM91 type Korean nephropathogenic virus (KM91 strain) and Korean respiratory virus (D85/06 strain). In contrast, Massachusetts (Mass) type attenuated vaccine strain H120 showed protection of 37.5 to 50% against these three viruses. Our results indicate that the AVR1/08 strain has potential as an attenuated vaccine effective in controlling IBVs circulating in Korea.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.208-211
• /
• 2008

Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.390-392
• /
• 2012

Diarrhetic shellfish poisoning toxins were investigated by liquid chromatography-electrospray ionization mass spectrometry (LC-MS/MS). Okadaic acid (OA), Dinophysistoxin-1 (DTX1), Pectonotoxin2, (PTX2) and Yessotoxin (YTX) in bivalves were quantified. OA were found in four samples; mussel Mytilus edulis (0.001 ${\mu}g/g$), Oyster Crassostrea gigas (0.004 and 0.001 ${\mu}g/g$) and manila clam Ruditapes philippinarum (0.001 ${\mu}g/g$). DTX1, PTX2, and YTX were not detected from all of the samples examined.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.304-311
• /
• 2022

Construction inspection is a crucial stage that ensures that all contractual requirements of a construction project are verified. The construction inspection capabilities among state highway agencies have been greatly affected due to budget reduction. As a result, efficient inspection practices such as risk-based inspection are required to optimize the use of limited resources without compromising inspection quality. Automated prioritization of textual requirements according to their criticality would be extremely helpful since contractual requirements are typically presented in an unstructured natural language in voluminous text documents. The current study introduces a novel model for predicting the risk level of requirements using machine learning (ML) algorithms. The ML algorithms tested in this study included naïve Bayes, support vector machines, logistic regression, and random forest. The training data includes sequences of requirement texts which were labeled with risk levels (such as very low, low, medium, high, very high) using the fuzzy logic systems. The fuzzy model treats the three risk factors (severity, probability, detectability) as fuzzy input variables, and implements the fuzzy inference rules to determine the labels of requirements. The performance of the model was examined on labeled dataset created by fuzzy inference rules and three different membership functions. The developed requirement risk prediction model yielded a precision, recall, and f-score of 78.18%, 77.75%, and 75.82%, respectively. The proposed model is expected to provide construction inspectors with a means for the automated prioritization of voluminous requirements by their importance, thus help to maximize the effectiveness of inspection activities under resource constraints.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.43-52
• /
• 2022

Recently, the government has been expanding the supply of hydrogen vehicles according to the roadmap for vitalizing the hydrogen economy, but is developing safety assessment and inspection technology for the relevant vehicles. This study analyzed the prevention of hydrogen bus accidents' economic effect that arises from the application and development of large-capacity CHSS oil pressure repetition-test assessment technology, hydrogen bus internal chamber pressure transmission and emission volume inspection technology, among various technologies capable of assessing the safety of a hydrogen bus fuel system. To this end, the contingent valuation method (CVM), one of the value evaluation methods of non-market goods, was applied to investigate users' willingness to pay for each inspection technology. The survey for users' willingness to pay was conducted by attaching posters to promote surveys on the internet and within buses to the entire public. As a result of the analysis, the average WTP of the hydrogen bus internal chamber pressure transmission volume inspection technology was 25.3 KRW, the average WTP of the hydrogen bus internal chamber pressure emission volume inspection technology was 18.6 KRW, and the average WTP of the large-capacity CHSS oil pressure repetition-test assessment technology was measured at 16.7 KRW. In addition, the costs and benefits of the introduction of the relevant inspection technology were defined through the interviewing of experts at related research institutions and businesses. As a result of conducting an economic analysis (4.5% discount rate) according to the development of each inspection technology, economic feasibility was seen in all assessment and inspection technologies. As much as the technology is indispensable for the safe use of hydrogen buses, it shows that investment in related technology is very necessary in the future. However, because it was decided that the relevant analysis will differ according to the distribution rate of hydrogen buses, further analysis following this future distribution rate of hydrogen buses is needed, and future users should be made clearly aware of the safety and environmental nature of the technology.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.158-163
• /
• 2023

This study aimed to determine mercury (Hg), methylmercury (MeHg), and selenium (Se) levels in deep-sea fishes distributed in Gyeonggi-do, South Korea. Concentrations of Hg, MeHg, and Se were measured by using a mercury analyzer and Inductively Coupled Plasma - Mass Spectrometry (ICP-MS). The average content (mg/kg) in the seafood samples was as follows: Hg, 0.7647 (0.0182-5.3620), MeHg, 0.0764 (0.0096-0.8750), and Se, 0.4728 (0.1075-3.5100). All the levels of MeHg were below the recommended standards of the Ministry of Food and Drug Safety i.e., <1.0 mg/kg. Recent studies have shown that Se prevents Hg toxicity. The average daily intake in humans was 3.3 ㎍/kg, which was lower than the recommended amount (50-200 ㎍/person/day). The weekly intake of Hg and MeHg was calculated to be 6.07% and 1.90%, respectively, of the provisional tolerable weekly intake (PTWI). This study showed that the weekly intake of Hg and MeHg from abyssal fish was less than the PTWI recommended by the Joint FAO/WHO expert committee on food additives. Therefore, the levels reported in this study are presumed to be adequately safe.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.2
• /
• pp.202-218
• /
• 2015

Many countries have introduced new imported food safety measures, following the accident at Fukushima Daiichi Nuclear Power Station. This study was conducted to evaluate the measures contents and effects on food trades values. Eight percent of members were notified the introduced measures to the World Trade Organization. The measures' contents were banning imports, enhancing inspection and adding certification requirement. The covered regions were some prefectures, entire Japan or all affected countries. European Union introduced a measure that subjecting foods originating from 12 prefectures to import at designated ports with required certification. The measures were amended 8 times until March 2014 to apply listed foods from 15 prefectures. The trade value of fishery products and miscellaneous foods were affected. Australia introduced a measure that required additional inspection of dairy, fishery and plants products from 13 prefectures with subsequent amendments. The trade value had no effect in tested foods. Chinese Taipei introduced a temporary import ban for all foods from 6 prefectures. Trade values for fruits were affected. The United States issued an import alert for detention without examination for listed prefectures and goods without introducing new measures. Although no specific products were affected, trade values for all foods were affected.

• The Korean Journal of Pesticide Science
• /
• v.17 no.1
• /
• pp.65-71
• /
• 2013

The modified QuEChERS method was evaluated for rapid determination of pesticide residues in spinach by gas chromatography-nitrogen phosphorous detector (NPD) and electron capture detector (ECD). Fifty GC-amenable pesticides which were most frequently detected in monitoring were selected in the current study. Matrix-matched calibration was performed. The detector response for all pesticides was linear with determination coefficients higher than 0.995. LODs for most compounds ranged between 0.001 and 0.1 ug/g, and about 90% of the compounds had LODs of less than 0.05 ug/g. LOQs ranged from 0.001 to 0.32 ug/g, which were well below the MRLs permitted for most of pesticides. In the majority of cases, the recoveries (80-120%) and relative standard deviations (RSDs) (less than 20%) were within acceptable levels except for dichlorvos, propamocarb, chlorothalonil, dichlofluanid, cyhalothrin and fenvalerate. Also, this method which is applied to routine samples showed good results when comparing with traditional multi-residue method.

• The Korean Journal of Pesticide Science
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2013

This study was conducted to the amount of pesticide residue in 21 different kinds of 100 commercial flowering teas. Multi-residue analyses of 203 pesticides was performed using the GC-ECD, GC-NPD, GC-MSD, and LC-MS/MS. Pesticide residues were detected in 4 samples (4%) of which 4 samples (4%) violated the maximum residue limits. 4 samples violating the limit were all imported teas. Pesticides detected were chlorpyrifos, flufenoxuron, lufenuron, pyrimethanil and methoxyfenozide. These results indicate the need of continuous monitoring of pesticide residue needs for safety of flowering teas.

• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.162-167
• /
• 2013

An analytical method for the simultaneous determination of pencycuron in agricultural products was established by using GC-NPD. The method was validated through the guidelines of linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy and precision. The calibration curve of pencycuron was linear over the concentration range of 0.02-2 mg/kg with correlation coefficient of above 0.9999. The limits of detection and quantification were 0.005 and 0.02 mg/kg. Mean recoveries of pencycuron for each sample were 79.6-107.5% at the level of 0.02 mg/kg and 86.4-112.1% at the level of 0.2 mg/kg and 84.0- 104.9% at the level of 1 mg/kg. Relative standard deviation (RSD) in recoveries were all less than 5%. The intra- and inter-day precision (RSD) were 1.6-3.0% and 5.3-11.5%, respectively. The result of validation indicated that this method was accurate and sensitive assay.