• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2881-2882
• /
• 2011

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 제1회 총회 및 추계학술발표회
• /
• pp.35-35
• /
• 1998

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.20-20
• /
• 1987

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.677-684
• /
• 1988

Titania powders were obtained from the various hydrolysis condition the variation of Alkoxide, water/Alcohol, REaction, Temp., reaction time and solvent system were investigated. In this result, spherical monodisperesed titania gel powders(≒0.7${\mu}{\textrm}{m}$) were obtained using EtOH(as solvent), and this method had rapid reaction time compare with iso-PrOH(as solvent).

• Journal of information and communication convergence engineering
• /
• 제1권3호
• /
• pp.133-138
• /
• 2003

The preparation of $Al_{2}O_{3}-SiO_{2}$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. For the preparation of thin, continuous $Al_{2}O_{3}-SiO_{2}$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_{2}O_{3}-SiO_{2}$ upon heating to $1000^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 대한화학회지
• /
• 제33권2호
• /
• pp.263-270
• /
• 1989

금속알루미늄 조각과 alcohols을 반응시켜 Al-alkoxides를 합성하였으며 이것을 가수분해하여 얻은 Al-hydroxides와 시약 AlCl3로부터 얻은 Al-hydroxides를 여러 온도에서 소성하여 여러 상의 고순도 $Al_2O_3$를 제조하였다. 제조한 ${\gamma}$와 ${\eta}$상 알루미나의 촉매적 특성을 알아보았고, $Al(OH)_3$로부터 ${\alpha}-Al_2O_3$의 생성과정을 속도론적으로 고찰하였다.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.473-478
• /
• 1988

In order to obtain the high purity $\beta$-SiC powder that possesses the excellent sinterability and is close to the spherical shape, the carbon black was mixed into the composition of Si(OC2H5)4-H2O-NH3-C2H5OH which the monodispersed spherical fine particles is formed the hydrolysis of Ethylsilicate and the mixture was carbonized under an argon atmosphere. Particle shpae, size and the yield of $\beta$-SiC powder were investigated according to the molar ratio of carbon/alkoxide and variations of reaction temperature and reaction time. The results of this study are as follow ; 1) The yield of $\beta$-SiC gained from the reaction for one hour at 150$0^{\circ}C$ almost got near 100% and the particle size of $\beta$-SiC from the reaction for 15 hrs at 150$0^{\circ}C$ was 0.2${\mu}{\textrm}{m}$ on the average and close to the spherical shape agglomerate state. 2) When the molar ratio carbon/alkoxide is over 3.1 and the reaction occurs at 145$0^{\circ}C$ for 5hrs, the carbon content has not an effect on the kind of crystal of product.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.934-940
• /
• 1994

Fibers of ZrO2-SiO2 system were prepared from the hydrolysis and condensation of Si(OC2H5)4 and Zr(OnC3H7)4 with different H2O/alkoxide molar ratios. It was found that fibers could be drawn in the viscosity range of 1~100 poise from HCl catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. The fibrous gels were converted into the corresponding oxide glass fibers by heating at 80$0^{\circ}C$. Mechanical test was performed on E, A and 20ZrO2-80SiO2 glass fibers reinforced cement in order to investigate the flexural strength. The flexural strength value of 20ZrO2-80SiO2 glass fibers reinforced cement was greater than those of E and A. The chemical durability of the fibers in alkaline solutions increased with ZrO2 content. The weight loss due to the corrosion by 2N-NaOH solutions at $25^{\circ}C$ for 160 hours was about 0.31$\times$10-2 mg/dm2 for the 20ZrO2-80SiO2 glass fibers, which was superior to that of Vycor glass.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.61-66
• /
• 2001

$WO_3$ 박막은 졸겔방법으로 텅스텐 알코산화물 용액을 사용하여 마이크로 슬라이드유리와 ITO 유리기판위에 여러번 침적도포시켜 다층박막형으로 제작하였다. 침적도포와 시료제조 공정인자가 박막의 구조, 광학적 및 전기화학적 특성에 미치는 영향이 연구되었다. 텅스텐 알코산화물 용액을 사용하여 증착속도를 0.005m $s^{-1}$로 하여 제작된 박막은 매우 균일하였으나 증착속도를 0.007m $s^{-1}$ 보다 크게 하여 제작된 시료의 두께는 상당한 변화를 보였다. 전기화학적 착색 실험결과 박막은 $200^}\circ}C$보다 낮은 온도에서 열처리된 시료는 쉽게 착색이 되었다. 라더포드 후방산란법에 의해 착색된 시료에서의 $K^+$ 이온들은 막 속에 균일하게 분포되어 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.222-225
• /
• 2011

Lead zirconate titanate (PZT) films were fabricated on Pt/Ti/$SiO_2$/Si substrate by the sol-gel method using a sol containing poly(N-vinylpyrrolidone) (PVP). PVP in alkoxide solutions can suppress the condensation reaction in gel films during heat treatment, and increase the viscosity of alkoxide solutions. Single-phase PZT films as thick as 1 ${\mu}m$ were deposited by repetitive coating with successive third-step heat treatments at 150$^{\circ}C$, 350$^{\circ}C$ and 650$^{\circ}C$. After heat treatment, the films were crack free, and optically transparent. As a result, we demonstrated a PZT film with a PVP molar ratio of 0.5, which has a permittivity of 734, a dielectric loss of 0.042, a $P_r$ of 40.5 ${\mu}C/cm^2$ and an $E_c$ of 156 kV/cm.