• Title/Summary/Keyword: alkali-free

Search Result 158, Processing Time 0.026 seconds

Fabrication of P-type Transparent Oxide Semiconductor SrCu2O2 Thin Films by RF Magnetron Sputtering (RF 마그네트론 스퍼터링을 이용한 p 타입 투명전도 산화물 SrCu2O2 박막의 제조)

  • Seok, Hye-Won;Kim, Sei-Ki;Lee, Hyun-Seok;Lim, Tae-Young;Hwang, Jong-Hee;Choi, Duck-Kyun
    • Korean Journal of Materials Research
    • /
    • v.20 no.12
    • /
    • pp.676-680
    • /
    • 2010
  • Most TCOs such as ITO, AZO(Al-doped ZnO), FTO(F-doped $SnO_2$) etc., which have been widely used in LCD, touch panel, solar cell, and organic LEDs etc. as transparent electrode material reveal n-type conductivity. But in order to realize transparent circuit, transparent p-n junction, and introduction of transparent p-type materials are prerequisite. Additional prerequisite condition is optical transparency in visible spectral region. Oxide based materials usually have a wide optical bandgap more than ~3.0 eV. In this study, single-phase transparent semiconductor of $SrCu_2O_2$, which shows p-type conductivity, have been synthesized by 2-step solid state reaction at $950^{\circ}C$ under $N_2$ atmosphere, and single-phase $SrCu_2O_2$ thin films of p-type TCOs have been deposited by RF magnetron sputtering on alkali-free glass substrate from single-phase target at $500^{\circ}C$, 1% $H_2$/(Ar + $H_2$) atmosphere. 3% $H_2$/(Ar + $H_2$) resulted in formation of second phases. Hall measurements confirmed the p-type nature of the fabricated $SrCu_2O_2$ thin films. The electrical conductivity, mobility of carrier and carrier density $5.27{\times}10^{-2}S/cm$, $2.2cm^2$/Vs, $1.53{\times}10^{17}/cm^3$ a room temperature, respectively. Transmittance and optical band-gap of the $SrCu_2O_2$ thin films revealed 62% at 550 nm and 3.28 eV. The electrical and optical properties of the obtained $SrCu_2O_2$ thin films deposited by RF magnetron sputtering were compared with those deposited by PLD and e-beam.

Esophageal Reconstruction for Hypopharyngeal Stricture After Severe Corrosive Injury (부식성 하인두 협착시 식도재건술)

  • 변정욱;구본일
    • Journal of Chest Surgery
    • /
    • v.30 no.1
    • /
    • pp.48-54
    • /
    • 1997
  • Between 1987 and 1995, eleven patients with severe chronic corrosive stenosis of the hypopharynx and esophagus underwent surgical restoration of digestive continuity at Inje University Seoul Palk Hospital. There were 7 male and 4 female patients aged from 21 to 47 years (mean, 34 years). The caustic material was acid in 6 patients and alkali in 5 patients. The esophagus was reconstructed using the right colon In 9 and left colon in 2. The cervical approach and the side of proximal anastomosis depended on the status of the pyriform slnus of the hypopharynx. In the neck, J-formed incision was made along the sternocleidomastoid muscle. The sternohyoid and thyrohyoid muscles were divided transversely to expose the thyroid cartilage. Hypopharyngeal opening for proximal anastomosis was made by reverse triangular formed resection of the thyroid cartilage after elevation of perichondrium. Immediately after operation, dysphagia and aspiration into trachea were common, so training of swallowing was required. Feeding gastrostomy was usually maintained for 3 months until restoration of swallowing function was confirmed . There was graft necrosis in 3 patients, who were treated with jejunal free graft. Revisional procedures for stenosis of cervical anastomosis in B patients consisted of widening of pharyngocecostomy site in 2 and resection of adhesive band in one. Return of normal swallowing assuring normal nutrition was obtained in 10 of 11 cases.

  • PDF

Postharvest Changes in Quality and Biochemical Components of Leaf Lettuce (상치의 수확후(收穫後) 품질(品質) 및 성분변화(成分變化))

  • Kim, Seong Yeol;Hong, Young Pyo;Choi, Woo Young
    • Korean Journal of Agricultural Science
    • /
    • v.12 no.1
    • /
    • pp.128-138
    • /
    • 1985
  • This study was conducted to elucidate the shelf-life and quality changes in relation to biochemical components in leaf lettuce (Lactuca sativa L.). The shelf-life of leaf lettuce at room temperature was 2 to 3 days. But it was extended to 3 weeks by packaging in a 0.01 mm thick polyethylene film sack when stored at $3^{\circ}C$. The ascorbic acid contents of fresh leaf lettuce was 25 mg per 100 gram fresh weight. The acid at room temperature was almost destroyed after 4 days storage. But the contents of ascorbic acid at $3^{\circ}C$ maintained about 50 to 60% of the initial level in packaging of polyethylene film sack after 8 days storage. The content of chlorophyll was greatly decreased at room temperature but no significant changes were found at $3^{\circ}C$. The changes of total sugar and reducing sugar contents during storage were not very different between treatments. The contents of alkali soluble protein and free amino acid gradually increased in the treatments of polyethylene film sack packaging during storage in general, but the contents decreased after the increase in control treatment. Nucleic acid content, peroxidase and polyphenoloxidase activities were measured and discussed in relation to the leaf senescence.

  • PDF

Study on the fabrication of Ceramic Core using a Gel-casting Process in Aqueous Medium(II) : Physical Properties of Sintered Ceramic Core Body (수용액 매체에서 젤-케스팅 공정을 이용한 세라믹 코어 제조에 관한 연구(II) : 세라믹 코어 소결체의 물성)

  • Kim, Jae-Won;Kim, Du-Hyeon;Kim, In-Su;Yu, Yeong-Su;Choe, Baek-Gyu;Kim, Ui-Hwan;Jo, Chang-Yong
    • Korean Journal of Materials Research
    • /
    • v.11 no.6
    • /
    • pp.465-471
    • /
    • 2001
  • The effect of sintering condition on the mechanical properties and leachability of polydispersed ceramic core body made by gel-casting process in aqueous medium have been investigated. The polydispersed ceramic slip that has low viscosity($\leq$1000cP, at 1000cP (at $50sec^{-1}$ ) and high solid loading(50vo1%) was obtained. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$for 48hrs under relative humidity of 80%. Crack-free green body was successfully fabricated through the above process. The strength at room temperature, apparent bulk density, and shrinkage of the ceramic core body increased propotionally with increasing sintering temperature(1100~150$0^{\circ}C$). However, porosity of the ceramic core body showed relatively low vague. Leaching rate of sintered core body increased with increasing porosity of the sintered body, and was significantly dependent upon the concentration of alkali caustic solution at the same leaching temperature.

  • PDF

Esophageal Reconstruction by Hypopharyngointestinal Anastomosis in Corrosive Upper Esophageal Stricture (부식성 상부식도 협착증에서 하인두-장 문합에 의한 식도재건술)

  • Park, Jae-Kil;Lee, Sun-Hee;Chang, Yun-Hee;Jin, Ung;Kwack, Moon-Sub;Kim, Se-Wha;Chun, Sung-Won
    • Journal of Chest Surgery
    • /
    • v.31 no.9
    • /
    • pp.893-898
    • /
    • 1998
  • Material and Method: Esophageal reconstruction by the hypopharyngointestinal anastomosis was done in 7 patients of corrosive upper esophageal stricture at St. Mary's Hospital from August 1995 to January 1997. Result: There were one male and six female patients ranging from 20 to 63 years of age. The causative agents were acid in 6 patients and alkali in 1 patient. The esophageal reconstruction was made by hypopharyngcolojejunostomy in 4 patients and hypopharyngocologastrostomy in 3 patients. There were no operative mortalities. One patient developed anastomotic stenosis but others were free from dysphagia. All gained 4 kg to 13 kg of body weight during the follow-up period. Conclusion: In this experience right colon and terminal ileum including ileocecal valve was revealed as a good substitute for the esophagus and the esophageal reconstruction by hypopharyngocologastro (jejuno)stomy seems to be a satisfactory method with acceptable morbidity and mortality in corrosive upper esophageal stricture patient.

  • PDF

An Investigation on the Long Term Durability of High-strength Shotcrete Using Field and Combined Deterioration Test (현장실험과 복합열화시험을 통한 고강도 숏크리트의 장기내구성 검토)

  • Ma, Sang-Joon;Choi, Jae-Seok;Ahn, Kyung-Chul;Kim, Sun-Myung;Kim, Dong-Min
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.10
    • /
    • pp.77-91
    • /
    • 2006
  • Domestic practices in shotcrete use have developed in many respects even now, but it still has issues about material, construction, quality standard and so on. In overseas, the construction using high strength shotcrete with $39.2{\sim}58.8 MPa$ of compressive strength is becoming common based on the shotcrete technology of high strength and durability. However, domestic shotcrete design strength is low at around 20.6 MPa of compressive strength and a long term durability is also insufficient. In this paper, field tests using high-quality additives and accelerators were performed to obtain the improvement of shotcrete strength and EFNARC standard was used to evaluate the field test results. In addition, deterioration test combined with the freezing-thawing and carbonation was also performed in order to investigate a long-term durability of high-strength shotcrete. As a result of the field test, the promotion ratio of early strength was $90{\sim}97%$ in case of using alkali-free accelerators. And the compressive strength of the shotcrete using Micro-silica fume was $45.2{\sim}55.8MPa$ and flexible strength was $5.01{\sim}6.66MPa$, so the promotion ratio of strength was $37{\sim}79%$ and $17{\sim}61%$ respectively. The promotion effect of strength by silica fine additives ratio of $7.5{\sim}10%$ for cement mass was much superior to the other cases. It was especially examined that using Micro-silica fume reduced deterioration due to mixed steel fiber and improved a long-term durability of shotcrete.

Studies on the Surface Charge Characteristics and Some Physico-Chemical Properties of two Synthetic Iron Hydrous Oxides and one Aluminum Hydroxide Minerals (합성(合成) 수산화(水酸化) 철(鐵) 광물(鑛物)과 수산화(水酸化) 알루미늄 광물(鑛物)의 표면(表面) 전하(電荷) 및 물리화학적(物理化學的) 특성(特性)에 관(關)한 연구(硏究))

  • Lim, Sookil H.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.17 no.2
    • /
    • pp.147-154
    • /
    • 1984
  • Two Fe-hydrous oxide A,B and one Al-hydroxide minerals were synthesized precipitating Fe $Cl_3$ and $AlCl_3$ with alkali solution(NaOH) at pH 6.0, 12.0 and 4.5 respectively, for precise understanding of physico-chemical and surface charge characteristics of soils in which these minerals are dominant. Identification of these final products, effect of free and amorphous materials on X-ray diffraction analysis, particle size distribution and surface change characterics of these minerals were performed. Fe-hydroxide A and B were identified as great deal of X-ray amorphous material and as goethite with large amount of X-ray amorphous material, respectively. Dehydration by oven at $105^{\circ}C$ of these minerals exhibited akaganeite peaks with low X-ray amorphous hump and pure goethite peaks for Fe-hydroxide A and B, respectively. Both minerals, however, turned into hematite upon firing at $550^{\circ}C$. On the other hand, Al-hydroxide identified as mixture of gibbsite and bayerite of around 7:3 ratio. Application of sodium dithionite and ammonium oxalate solutions for removal of free or amorphous Fe and Al from these minerals revealed that only peak intensities of Al-hydroxide system were enhanced upon Al-extraction by oxalate solution even though dithionite solution was much powerful to extract Fe from Fe-hydrous oxide systems. Original(wet) Fe-hydrous oxide A has the highest specific surface and surface charge development(negative and positive), and the greatest amount of less than $2{\mu}m$ sized particles. Specific surface and clay sized particles(less than $2{\mu}m$) of Fe-hydrous oxide A, however, were drastically reduced upon dehydration($P_2O_5$ and oven drying) compare to the rest minerals. The Z.P.C. of these synthetic minerals were 8.0-8.5, 7.5-8.0 and 5.5-6.0 for Fe-hydrous oxide A, B and Al-hydroxide, respectively.

  • PDF

Mantle-derived CO2-fluid Inclusions in Peridotite Xenoliths from the Alkali Basalt, Jeju Island, South Korea (제주도 현무암에 포획된 페리도타이트에 산출되는 맨틀 기원의 CO2-유체포유물)

  • Seo, Minyoung;Woo, Yonghoon;Park, Geunyeong;Kim, Eunju;Lim, Hyoun Soo;Yang, Kyounghee
    • The Journal of the Petrological Society of Korea
    • /
    • v.25 no.1
    • /
    • pp.39-50
    • /
    • 2016
  • Negative crystal shaped $CO_2$-rich fluid inclusions, trapped as primary inclusions in neoblasts and as secondary inclusions in porphyroblasts, were studied in spinel peridotite xenoliths from Jeju Island. Based on microthermometric experiments, the solid phase melts at $-57.1^{\circ}C$(${\pm}0.9^{\circ}C$) with no other observable melting events, indicating that the trapped fluid is mostly $CO_2$. The homogenization temperatures show a much wider range from $-39^{\circ}C$(${\rho}=1.12g/cm^{3)}$) to $23^{\circ}C$(${\rho}=0.82g/cm^{3)}$), suggesting that most of the inclusions (originally trapped at mantle conditions) re-equilibrated to lower density values. Nevertheless, the highest density $CO_2$ in our fluid inclusions is consistent with entrapment of fluids at upper mantle pressures (and depths). The calculated trapping pressure from $CO_2$-rich fluid inclusions that appear to be free from re-equilibrium, e.g., showing the lowest homogenization temperatures, is ${\approx}0.9GPa$. Based on the petrographic evidences, the fluid entrapment can be regarded as a late stage event in the evolution of the shallow lithospheric mantle.