• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.403-409
• /
• 2005

Polycyclic Aromatic Hydrocarbons(PAHs) contamination arises from several sources including processing of food(smoking, direct drying, cooking) and environmental contamination of air, water, or soil, the later being considered as the most important. In this study, to establish the analytical method for some PAHs[benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in fish, alkali digestion time, extraction solvents, elution volume of florisil cartridge for clean-up have been optimized. The methodology involved saponification and extraction with n-hexane, clean-up on Sep-Pak florisil cartridges and determination by HPLC/FLD(High Performance Liquid Chromatography/Fluorescence Detector). Overall method recoveries for 8 PAHs spiked into these products ranged from 90 to 106%.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1243-1252
• /
• 2019

The purpose of this study is to investigate the optimum conditions of biomass pretreatment with potassium hydroxide (KOH) for efficient utilization of cellulose, hemicellulose and lignin from Miscanthus. The optimization of variables was performed by response surface methodology (RSM). The variation ranges of the parameters for the RSM were potassium hydroxide 0.2~0.8 M, reaction temperature 110~190℃ and reaction time 10~90 min. The optimum conditions of alkali pretreatment from Miscanthus were determined as follows: concentration of KOH 0.47 M, reaction temperature 134℃ and reaction time 65 min. At the optimum conditions, the yield of cellulose from the solid fraction after pretreatment was predicted to be 95% by model prediction. Finally, 66.1 ± 1.1% of cellulose were obtained by verification experiment under the optimum conditions. The order contents of solid extraction were hemicellulose 26.4 ± 0.4%, lignin 3.7 ± 0.1% and ash 0.5 ± 0.04%. The yield of ethanol concentration of 96% was obtained using separated saccharification and fermentation.

• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.155-159
• /
• 1968

On the extraction of humic acid from peat, the optimum conditions were studied and the effects of them on the characteristics of humic acid were also examined by means of infrared spectroscopy. 1. Pretreatment of peat with diluted 6-8% HCl solution for 5 hrs. prior to extraction with alcohol-benzol azeotropic mixture have resulted the better yield of humic acid. The water soluble Na-humates were obtained by the subsequent extraction with one hundred times quantity of caustic soda solutieon for 1hr. at 90 $^{\circ}C$. Thus the pure humic acids have been yielded approximately 40% (by wt.) from the raw peat. 2. In characteristics of humic acid, the chemical structure, mainly the contents of such functional groups as -COOH, -OH (phenol type), $-CH_2CO-$, $-CH_2{\cdot}O{\cdot}CH_2-$ and aromatic rings were varied according to the concentration of alkaline solution, temperature and time when the humic acids were extracted with alkali.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.993-999
• /
• 1998

Methanol extract of roots of Amblytropis pauciflora Kitagawa showed the antimicrobial activity to three test strains. Antimicrobial spectra of various extracts of Amblytropis pauciflora Kitagawa were tested against 24 strains of bacteria and fungi. The crude methanol extract inhibited the growth of 12 strains of bacteria and Asp. fumigatus with the exception of yeasts. The properties of the antimicrobial substance were very stable under heat(at 12$0^{\circ}C$), acid(pH 3.0) and alkali(pH 11.0) treatment. Only the root harvested in spring showed the antimicrobial activity. Among the components extracted by butanol, ginseng saponin Rg1 and various saponin-like materials were detected by TLC analysis using a plate of silica gel 60F254. The antimicrobial compound was purified by methanol extraction, activated charcoal column chromatography, Sep-pak(C18) pretreatment and reverse phase HPLC. The purified compound was detected at 13.520 min as a single peak(about 98% purity) through the HPLC analysis.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.27-36
• /
• 1983

This study was performed to get the basic information on nitric acid pulping of beech wood. In order to reduce the consumption of nitric acid, alkali pretreated woods were applied to a nitric acid pulping process. It consisted of nitric acid treatment to a high residual lignin content and the subsequent delignification with alkali, required far less chemical than the single stage method. At the first stage of nitric pulping, pulp yield descreased with increasing cooking time and 3 percent of nitric acid was more effective on the delignification of wood than 1 or 2 percent. Alkali pretreatment of wood improved significantly the rate of delignification, and 79 percent of the pretreated yield was good enough for excellent delignification. The dissolution of carbohydrate (mainly xylose) was increased with increasing cooking time, especially at the second stage. It would be considered that carbonyl groups introduced to polysaccharides in wood by nitric acid oxidation caused the degradation of carbohydrates.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.1028-1033
• /
• 2008

Sequential quick crushing and alkali hydrolysis(SeCAH), as a pretreatment for foodwaste, incorporating mechanical crushing and alkali hydrolysis was proposed and investigated in this study. Focuses were placed on the improvement of biodegradability of foodwaste and the estimation of potential inhibitors for anaerobic digestion. The solubility of the pretreated foodwaste by SeCAH was increased 2.5 times rather than mechanical crushing. Considering solubility improvement and energy consumption, 2,000 rpm of crushing strength and 5$\sim$10 sec of crushing time are recommended. After SeCAH, the fraction of large organic particles(>2.36 mm) of foodwaste was sharply decreased from 88.0% to 29.0%, otherwise the fraction of small particles(<75 $\mu$m) was greatly increased from 10.5% to 40.7%. Ammouinum, potassium and sulfate were estimated as potential inhibitors for anaerobic digestion and their concentrations in pig slurry were 3331.3 mg/L, 4256.5 mg/L and 1017.5 mg/L, respectively.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.461-469
• /
• 2012

This study was carried out to find the optimum chemical cleaning (CIP) conditions for ceramic microfiltration membrane process of Y drinking water treatment plant. B train consists of coagulation as pretreatment process with membrane was chemically cleaned 9 times more than that of A train with ozonation and coagulation. The frequent CIP of B train was due to improper CIP method suggested by membrane manufacture as well as different membrane fouling between A and B train resulting from the different pretreatment processes. That is, recovery rate of CIP was overestimated because the rate was calculated based on normalized trans membrane pressure (TMP) rather than normalized permeability. And also, iron oxide fouling was ineffectively removed by citric acid. By using a mixture of 1% citric acid and 0.1 N sulfuric acid as reagent for acid CIP step, the recovery rate of CIP was the highest while CIP efficiency by 0.1 N sulfuric acid was the lowest. When sulfuric acid concentration increased from 0.1 N to 0.3 N in mixture, total recovery rate of CIP was not increased due to the decreased CIP efficiency in alkali CIP step by 0.3% NaOCl although its rate in acid CIP step was increased. It was proved through the experiment result of CIP sequence changes that an acid followed by alkali CIP was more effective than that of the reverse method.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.115-119
• /
• 1975

Imported seaweeds Gracilaria sp. and Gelidium sp. from the Philippines and Gracilaria sp. from Brazil were subjected to the examination of yield and quality of agar according to various pretreatment conditions. As pretreatment condition for alkali-treated Gracilaria sp. from the Philippines, $0.05{\sim}0.1%$ concentration of sulfuric acid was proper to obtain the higher yield of agar for which a reverse proportionality was shown between the acid concentration and the strength of extraction condition. Highest yield from Gelidium sp. from the Philippines was obtained by pretreating with 5% sodium hydroxide at $90^{\circ}C$ for one hour, followed by 0.1% sulfuric acid treatment. Gracilaria sp. from Brazil gave the highest yield of agar by pretreatments with 1% sodium hydroxide followed by 0.05% sulfuric acid, both at room temperature for one hour. Acid treatment of alkali-treated Gracilaria sp. from the Philippines brought about the decrease of total nitrogen, total sulfur and crude ash, the increase of jelly strength and no marked change in gelation point and gelation ability. In general, acid-treatment conditions to give rise to high yield of agar improved the quality of product.