• 제목/요약/키워드: alignment accuracy

검색결과 300건 처리시간 0.031초

고가(高架)구조물의 정위치 시공을 위한 준스태틱RTK 측위의 적용성 실험 (Availability Evaluation of Quasi Static RTK Positioning for Construction of High Rise Buildings and Civil Structures)

  • 김인섭
    • 대한공간정보학회지
    • /
    • 제19권4호
    • /
    • pp.119-126
    • /
    • 2011
  • 초고층 건물이나 고가 구조물 상부의 정위치 측설에 주로 사용되어 왔던 광학식 TS장비는 시준선 확보의 어려움, 장거리 관측에 따른 오차의 증가 및 동적관측의 어려움 등으로 인하여 사용성이 많이 떨어지므로 최근에는 GPS를 이용한 측량방법이 제시되고 있다. 그러나 기존의 GPS측량방법들은 대부분 후처리 방법으로서 측설, 검측, 위치조정 및 확인측량 등 일련의 과정에서 시간이 과다 소요되는 문제점이 있다. 따라서 본 논문에서는 RTK측위 기법을 적용하여 실시간으로 구조물의 위치를 검측하고 조정함으로써 측량으로 인한 공사의 중단을 최소화 하고, 준스태틱 RTK기법에 의한 고정밀의 측정값을 기반으로 망조정을 통해 수 mm 이내의 높은 정확도로 시공좌표를 결정함으로써 공정관리와 품질관리를 모두 충족시킬 수 있는 방법에 대해 실험 하였다. 실험결과 130m 이상 높이의 고가 구조물 상층부에서 사변망을 이루는 4점의 준스태틱 RTK 관측점을 최소제곱법으로 망조정 하면 약 2mm 내외의 정확도로 구조물 측설이 가능하므로 향후 초고층 건물이나 고가 교량등의 시공측량에 널리 적용될 수 있을 것으로 사료된다.

Photon Knife 시스템에 근거한 뇌정위 방사선수술에서 표적위치 확인 (Verification of Target Position in Stereotactic Radiosurgery Based on Photon Knife System)

  • 최태진;김진희;김옥배
    • 한국의학물리학회지:의학물리
    • /
    • 제14권2호
    • /
    • pp.99-107
    • /
    • 2003
  • 선형가속기(Mitsubishi, ML15MDX)를 이용한 방사선수술시스템인 Photon Knife에서 Linac-gram을 통해 선속-표적 위치를 확인하여 신뢰성 있는 시술을 유지하도록 하였다. 선속-레이저광 교정 기구를 제작하여 레이저광의 입사점과 사출점을 조사하여 빔의 위치결정에 이용하였다. 선형가속기에 부착한 보조 콜리메이터의 고정을 확인하기 위해 Isocenter에서 5 cm 떨어진 위치에 팔각형 필름지지체를 두도록 제작하고 확인용 필름(Kodak X-omat V2)을 설치하였다. 필름에 선형가속기의 지지체를 45$^{\circ}$씩 회전조사 하여 필름에 나타난 거리로 보조 콜리메이터의 이동을 확인한 결과 실험 오차내에서 이동이 없음을 확인하였다. 임상에 이용한 체위 표시기는 10 mm 쇠구슬 제도와 납인형을 두어 PKRS 시술시 환부의 체위를 쉽게 확인할 수 있도록 고안제작되었다. 앙와위 및 우측 측와위로 조사한 방사선수술에서 표적 위치기에 있는 양측 쇠구슬과 콜리메이터 조사면과의 일치를 LINAC-gram에서 확인한 결과 CT 영상의 표적좌표와 비교해서 평균 0.8$\pm$0.26 mm 의 오차범위에서 시술하였음을 보이므로 방사선조사의 정확성을 알 수 있다. 선형가속기의 Couch 에 임의의 힘을 가했을 때 위치변동은 좌우 $\pm$5 mm, Couch 축방향으로 $\pm$1 mm, 상하로 $\pm$2 mm 이동할 수 있음을 확인하였다. 이상의 결과로 Photon knife 방사선 수술 시스템은 방사선수술 전 환부의 표적과 선속의 일치를 LINAC-gram을 통해 확인할 수 있어 시술의 신뢰도를 높일 수 있을 것으로 생각된다.

  • PDF

레이저광의 최대.최소 편향법을 이용한 액체의 굴절률 측정 (Measurement of Refractive Index of Liquids by the Maximum and Minimum Deviated Laser Beam)

  • 이재란;김석원;이용산
    • 한국광학회지
    • /
    • 제19권3호
    • /
    • pp.182-186
    • /
    • 2008
  • 프리즘 분광기는 굴절률 측정을 위한 표준 장치로, 대학교 실험실에서 사용되는 전형적인 실험 기구이지만, 정렬할 때 많은 주의가 요구되고 장치의 견고함에 비해 측정된 굴절률의 정확도는 떨어진다. 이러한 단점을 보완한 최대 최소 편향법은 회전 플랫폼과 길이 측정용 테이프로 저렴하게 장치가 구성되고 넓은 스크린을 활용하여 비교적 정확하게 굴절률을 측정할 수 있다. 본 연구에서는 한변이 26 mm인 속이 빈 등변 프리즘을 제작하여 글리세린($C_3H_5(OH)_2$), 사염화탄소($CCl_4$), 아닐린($C_6H_4NH_2$), 이황화탄소($CS_2$), 크실렌($C_6H_4(CH_3)_2$) 등의 액체를 채워, He-Ne 레이저의 파장 632.8 nm와 $YVO_4$ 레이저의 파장 532 nm에 대해 프리즘 분광기와 최대 최소법으로 이들 액체의 굴절률을 측정하였다. 측정결과 최대 최소법으로 얻어진 데이터가 프리즘분광기에 의해 얻어진 데이터보다 더 정확하고 정밀함을 확인하였다.

발레핏(Balletfit)프로그램이 체형 변화에 미치는 효과 연구 (Effects of Balletfit on the Body Shape)

  • 이재선
    • 트랜스-
    • /
    • 제4권
    • /
    • pp.111-134
    • /
    • 2018
  • 이 연구의 목적은 Balletfit의 원리와 그 프로그램 구조를 이해하고 신체모양의 변화와 자세 교정에 대한 Balletfit의 효과를 확립하는데 있다. 본 연구는 가장 일반적으로 사용되는 질적 연구 방법을 바탕으로 3개월에서 6개월 동안 Balletfit 개인 레슨을 주 2 회를 수강 한 10 명을 선정하였다. 이 참가자들은 깊이 있는 통찰력을 얻기 위해 그룹 레슨 대신 개인 레슨 참가자로 선발하였다. 본 연구는 소수의 참가자들에게만 국한되어 결과를 표준화하기는 어렵다. 또한 이 연구는 자세 측정 장치가 아닌 참가자의 의견을 토대로 하기 때문에 결과의 정확도 또한 제한적임을 밝혀둔다. 본 연구 결과는 다음과 같다. 첫째, 참여 동기는 인터넷 조사 또는 지인의 추천으로 운동을 시작한 경우가 대부분이었다. 둘째, 자신의 신체를 인식하고 자세를 교정하려고 노력하고 있었다. 셋째, 이상적인 자세로 회복되었다. 대부분의 참가자들은 이상적인 자세가 무엇인지를 알게 되었고 참가자의 신체가 이상적으로 변화되어 참가자는 내/외부 신체를 인식하여 건강을 회복했다. 마지막으로, 그들은 아름다운 바디 라인을 선호하는 경향이 있었다. 경험 후에 모든 참가자들은 바디 라인에 관심을 갖게 되었고 올바른 자세로 아름다운 바디 라인을 만드는 것을 선호했다. Balletfit의 가장 중요한 효과는 바디 라인이다. 따라서 Balletfit의 경험은 내외부의 신체 인식을 발전시키고 신체 형태의 변화에 영향을 미칠 수 있다고 본고는 바라본다. Balletfit은 아름답고 건강한 신체를 원하는 현대인에게 만족스러운 운동이 될 것이다.

  • PDF

상류부 선형특성을 반영한 지방부 왕복 4차로 연속류 도로의 주행속도 예측모형 개발 (Development of Operating Speed Prediction Models Reflecting Alignment Characteristics of the Upstream Road Sections at Four-Lane Rural Uninterrupted Flow Facility)

  • 조원범;김용석;최재성;김상엽;김진국
    • 대한교통학회지
    • /
    • 제28권5호
    • /
    • pp.141-153
    • /
    • 2010
  • 본 연구는 주행속도 프로파일 모형의 구성요소 중 주행속도 예측모형과 관련한 것으로서 지방부 왕복 4차로 도로를 대상으로 하고 있으며, 기존 연구들과는 대상도로, 속도 조사방법론 및 선형유형 구분에서 그 차별점이 있다. 기존의 대다수 연구들은 평면곡선부 및 평면직선부 중앙의 지점속도를 측정하고 이 자료를 활용하여 각각의 주행속도 예측모형을 개발하였다. 이러한 방법은 감가속이 평면직선부에서만 발생하고 평면곡선부에서는 일정한 속도를 유지한다는 주행행태에 대한 전통적인 가정에 기반한 것으로서, 구축된 모형에 의해 예측된 주행속도가 과대 과소추정 되거나 또는 실제 운전자의 주행행태를 제대로 묘사하지 못할 가능성이 높다는 한계가 있다. 이와 비교하여 본 연구는 현장에서 약100m 간격으로 연속 조사된 속도자료를 활용하여 실제 도로상에서 관측되는 주행속도 프로파일을 작성하였으며, 연속적인 속도변화를 분석한 결과를 토대로 모형구축에 활용될 자료를 추출하였다. 주행속도 예측모형은 평면선형과 종단선형의 조합에 따라 6가지 선형유형으로 구분되어 개발되었다. 본 연구에서 활용한 주행속도 조사방법 및 선형유형 구분은 주행속도 예측모형에 활용되는 자료 및 이를 기반으로 개발된 모형의 신뢰도를 제고함과 더불어, 연속적인 속도 변화 흐름을 상세하게 분석 평가할 수 있도록 하여 가감속 행태 분석 등 향후 주행행태 관련 분석에 효과적으로 활용될 수 있으며, 더 나아가 설계속도 기반의 현 도로설계기준을 주행속도 기반의 기준으로 보완하는데 활용되어 도로설계자 또는 정책결정자가 아닌 실제 도로를 이용하는 운전자의 관점에서 도로가 설계될 수 있도록 하는데 기여할 것으로 기대된다.

도시부 경로자료를 이용한 통행의 공간적 규칙성 분석 (Analysis of Spatial Trip Regularity using Trajectory Data in Urban Areas)

  • 이수진;장기태
    • 한국ITS학회 논문지
    • /
    • 제17권6호
    • /
    • pp.96-110
    • /
    • 2018
  • 최근 정보통신기술의 발달로 다양한 통행 정보 수집이 용이해지면서, 신규 교통정보 생성에 대한 연구가 주목받고 있다. 그 중 수요 및 교통량에 대한 추정 및 예측은 교통 운영에 필수적인 주요 지표 중 하나로, 특정 지점 혹은 구간의 통행 패턴이 반복됨을 전제로 한다. 기존에는 이러한 통행 규칙성을 증명하기 위해 설문 방식을 사용하였으나, 해당 방식은 높은 비용과 응답자 기억에 의존하는 응답으로 높은 정확도를 확보하기에는 한계가 있었다. 최근 ETC시스템, 스마트카드 등의 방법으로 통행데이터 수집이 용이해지면서, 다양한 시각에서 통행 규칙성을 규명하고자 하는 연구가 진행되고 있다. 본 연구에서는 대구광역시의 대규모 경로형 데이터를 분석하여 개별통행자가 여러 날에 걸쳐 공간적으로 유사한 통행사슬을 형성하는 것을 확인하였다. 이를 위하여 공간적 통행 유사성을 새롭게 정의하며, 서열정렬 알고리즘인 Dynamic Time Warping을 이용하여 일별 통행사슬 간 공간적 차이를 산정한다. 또한 산출된 공간적 통행 규칙성을 통해 고정적 교통수요 추정의 지표 및 교통서비스로의 활용방안을 논 하고자 한다.

영상 정합 및 통계학적 패턴 분류를 이용한 호흡률 측정에 관한 연구 (A Study on the Measurement of Respiratory Rate Using Image Alignment and Statistical Pattern Classification)

  • 문수진;이의철
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제8권10호
    • /
    • pp.63-70
    • /
    • 2018
  • 영상을 이용한 생체 신호 측정 기술이 발전하고 있으며, 특히 생명 유지를 위한 호흡 신호 측정기술 연구가 지속적으로 진행되고 있다. 기존 기술은 사람의 몸에서 방출하는 열을 측정하는 열화상 카메라를 통하여 호흡 신호를 측정하였다. 또한, 실시간으로 사람의 흉부 움직임을 분석하여 호흡률을 측정하는 연구도 진행되었다. 하지만, 적외선 열화상 영상을 이용하여 영상 처리를 하는 것은 외부 환경 요인으로 인해 호흡 기관의 탐색이 어려울 수 있으며, 이에 따라 호흡률 측정의 정확도가 떨어지는 문제들이 발생했다. 본 연구에서는 호흡 기관의 영역 탐색을 강화하기 위해 가시광 및 적외선 열화상 카메라를 이용하여 영상을 취득하였다. 그리고 두 영상을 기반으로 얼굴 인식, 영상 정합 등의 과정을 통해 호흡 기관 영역의 특징을 추출한다. 추출한 특징 값을 통계학적 분류 방법 중 하나인 k-최근접 이웃 분류기를 통해 호흡 신호의 패턴을 분류한다. 분류한 패턴의 특성에 따라 호흡률을 계산하며, 측정한 호흡률의 성능을 확인하기 위해 실제 호흡률과 비교 과정을 통해 분석함으로써, 호흡률 측정의 가능성을 확인하였다.

미생물법의학: 차세대염기서열분석 방법에 따른 MLVA 결과 비교 및 이를 활용한 DNA 감식 (Microbial Forensics: Comparison of MLVA Results According to NGS Methods, and Forensic DNA Analysis Using MLVA)

  • 윤형석;이승호;임승현;이대상;구세훈;김정은;정주환;김성주;허경행;송동현
    • 한국군사과학기술학회지
    • /
    • 제27권4호
    • /
    • pp.507-515
    • /
    • 2024
  • Microbial forensics is a scientific discipline for analyzing evidence related to biological crimes by identifying the origin of microorganisms. Multiple locus variable number tandem repeat analysis(MLVA) is one of the microbiological analysis methods used to specify subtypes within a species based on the number of tandem repeat in the genome, and advances in next generation sequencing(NGS) technology have enabled in silico anlysis of full-length whole genome sequences. In this paper, we analyzed unknown samples provided by Robert Koch Institute(RKI) through The United Nations Secretary-General's Mechanism(UNSGM)'s external quality assessment exercise(EQAE) project, which we officially participated in 2023. We confirmed that the 3 unknown samples were B. anthracis through nucleic acid isolation and genetic sequence analysis studies. MLVA results on 32 loci of B. anthracis were analysed by using genome sequences obtained from NGS(NextSeq and MinION) and Sanger sequencing. The MLVA typing using short-reads based NGS platform(NextSeq) showed a high probability of causing assembly error when a size of the tandem repeats was grater than 200 bp, while long-reads based NGS platform(MinION) showed higher accuracy than NextSeq, although insertion and deletion was observed. We also showed hybrid assembly can correct most indel error caused by MinION. Based on the MLVA results, genetic identification was performed compared to the 2,975 published MLVA databases of B. anthracis, and MLVA results of 10 strains were identical with 3 unkonwn samples. As a result of whole genome alignment of the 10 strains and 3 unknown samples, all samples were identified as B. anthracis strain A4564 which is associated with injectional anthrax isolates in heroin users.

인삼 모상근 프로테옴 데이터 분석 : 인삼 EST database와의 통합 분석에 의한 단백질 동정 (Proteome Data Analysis of Hairy Root of Panax ginseng : Use of Expressed Sequence Tag Data of Ginseng for the Protein Identification)

  • 권경훈;김승일;김경욱;김은아;조건;김진영;김영환;양덕춘;허철구;유종신;박영목
    • Journal of Plant Biotechnology
    • /
    • 제29권3호
    • /
    • pp.161-170
    • /
    • 2002
  • 인삼 모상근의 프로테옴 분석에 의해 얻은 질량분석 스펙트럼 데이터는 MALDI/TOF/MS에서 얻는 질량 스펙트럼과 ESI/Q-TOF/MS에서 얻는 탄뎀 질량 스펙트럼으로 구분된다. 질량 스펙트럼은 단백질이 효소에 의해 분해된 펩타이드들의 분자량 정보를 제공하며, 탄뎀 질량 스펙트럼에서는 아미노산 단위로 분해된 절편 단백질의 분자량으로부터 아미노산 서열을 결과로 얻는다. 펩타이드의 아미노산 서열을 BLAST로 검색하면 유사한 단백질을 GenBank에서 검색할 수 있다. 이러한 단백질 동정 방법은 완전한 유전체 서열이 알려진 생물체의 경우 높은 정확도로 단백질을 동정할 수 있으나, 그렇지 않은 경우는 유사한 단백질이 데이터베이스에 존재하지 않아 분석이 용이하지 않다. 본 연구에서는 질량 스펙트럼 및 절편 단백질의 아미노산 서열을 EST (expressed sequence tag) 서열과 비교하여 프로테옴 데이터와 일치하는 EST 서열을 찾아내고 이를 BLAST검색에 의해 단백질 동정에 활용하였다. ESI/Q-TOF/MS 에서 얻은 아미노산 서열은 길이는 짧지만 데이터의 신뢰도가 높으므로 EST 서열과의 연관 관계를 밝힘으로써 단백질에 대한 정보를 보완할 수 있었다. ESI/Q-TOF/MS에서 얻은 펩타이드의 아미노산 서열을 EST 서열과 비교한 결과 90%의 아미노산 서열이 EST DB에서 발견되었다. NCBI의 nr 데이터베이스에서 아미노산 서열을 검색하여 찾은 단백질이 68%임에 비하여, 인삼 EST 서열에 의한 검색이 22% 더 많은 결과를 얻었다. MALDI/TOF/MS의 질량 스펙트럼에서 nr 데이터베이스로 검색한 결과와 인삼 EST 데이터베이스를 검색한 결과가 일치하는 경우는 47개 중 9개인 19%에 불과하여, 탄뎀 질량 분석으로 아미노산 서열을 얻지 않고, 단지 질량 스펙트럼으로부터 단백질을 동정하는 방법으로는 단백질 동정의 정확한 결과를 기대하기 어려움을 확인하였다.

신기술 사용 과정에 관한 비교 사례 연구: 기술 전유 과정의 근거이론적 접근 (A Comparative Case Study on the Adaptation Process of Advanced Information Technology: A Grounded Theory Approach for the Appropriation Process)

  • 최희재;이준기
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.99-124
    • /
    • 2009
  • Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.